From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, famz@redhat.com, John Snow <jsnow@redhat.com>,
qemu-devel@nongnu.org, armbru@redhat.com,
vsementsov@parallels.com, stefanha@redhat.com, mreitz@redhat.com
Subject: [Qemu-devel] [PATCH v6 15/21] block: Resize bitmaps on bdrv_truncate
Date: Fri, 17 Apr 2015 19:50:03 -0400 [thread overview]
Message-ID: <1429314609-29776-16-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1429314609-29776-1-git-send-email-jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
block.c | 18 ++++++++++++++++++
include/qemu/hbitmap.h | 10 ++++++++++
util/hbitmap.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 76 insertions(+)
diff --git a/block.c b/block.c
index 735acff..b29aafe 100644
--- a/block.c
+++ b/block.c
@@ -113,6 +113,7 @@ static void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
int nr_sectors);
static void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
int nr_sectors);
+static void bdrv_dirty_bitmap_truncate(BlockDriverState *bs);
/* If non-zero, use only whitelisted block drivers */
static int use_bdrv_whitelist;
@@ -3583,6 +3584,7 @@ int bdrv_truncate(BlockDriverState *bs, int64_t offset)
ret = drv->bdrv_truncate(bs, offset);
if (ret == 0) {
ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
+ bdrv_dirty_bitmap_truncate(bs);
if (bs->blk) {
blk_dev_resize_cb(bs->blk);
}
@@ -5593,6 +5595,22 @@ BdrvDirtyBitmap *bdrv_reclaim_dirty_bitmap(BlockDriverState *bs,
return parent;
}
+/**
+ * Truncates _all_ bitmaps attached to a BDS.
+ */
+static void bdrv_dirty_bitmap_truncate(BlockDriverState *bs)
+{
+ BdrvDirtyBitmap *bitmap;
+ uint64_t size = bdrv_nb_sectors(bs);
+
+ QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
+ if (bdrv_dirty_bitmap_frozen(bitmap)) {
+ continue;
+ }
+ hbitmap_truncate(bitmap->bitmap, size);
+ }
+}
+
void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
{
BdrvDirtyBitmap *bm, *next;
diff --git a/include/qemu/hbitmap.h b/include/qemu/hbitmap.h
index 6cb2d0e..f0a85f8 100644
--- a/include/qemu/hbitmap.h
+++ b/include/qemu/hbitmap.h
@@ -65,6 +65,16 @@ struct HBitmapIter {
HBitmap *hbitmap_alloc(uint64_t size, int granularity);
/**
+ * hbitmap_truncate:
+ * @hb: The bitmap to change the size of.
+ * @size: The number of elements to change the bitmap to accommodate.
+ *
+ * truncate or grow an existing bitmap to accommodate a new number of elements.
+ * This may invalidate existing HBitmapIterators.
+ */
+void hbitmap_truncate(HBitmap *hb, uint64_t size);
+
+/**
* hbitmap_merge:
* @a: The bitmap to store the result in.
* @b: The bitmap to merge into @a.
diff --git a/util/hbitmap.c b/util/hbitmap.c
index 150d6e9..a10c7ae 100644
--- a/util/hbitmap.c
+++ b/util/hbitmap.c
@@ -400,6 +400,54 @@ HBitmap *hbitmap_alloc(uint64_t size, int granularity)
return hb;
}
+void hbitmap_truncate(HBitmap *hb, uint64_t size)
+{
+ bool shrink;
+ unsigned i;
+ uint64_t num_elements = size;
+ uint64_t old;
+
+ /* Size comes in as logical elements, adjust for granularity. */
+ size = (size + (1ULL << hb->granularity) - 1) >> hb->granularity;
+ assert(size <= ((uint64_t)1 << HBITMAP_LOG_MAX_SIZE));
+ shrink = size < hb->size;
+
+ /* bit sizes are identical; nothing to do. */
+ if (size == hb->size) {
+ return;
+ }
+
+ /* If we're losing bits, let's clear those bits before we invalidate all of
+ * our invariants. This helps keep the bitcount consistent, and will prevent
+ * us from carrying around garbage bits beyond the end of the map.
+ */
+ if (shrink) {
+ /* Don't clear partial granularity groups;
+ * start at the first full one. */
+ uint64_t start = QEMU_ALIGN_UP(num_elements, 1 << hb->granularity);
+ uint64_t fix_count = (hb->size << hb->granularity) - start;
+
+ assert(fix_count);
+ hbitmap_reset(hb, start, fix_count);
+ }
+
+ hb->size = size;
+ for (i = HBITMAP_LEVELS; i-- > 0; ) {
+ size = MAX(BITS_TO_LONGS(size), 1);
+ if (hb->sizes[i] == size) {
+ break;
+ }
+ old = hb->sizes[i];
+ hb->sizes[i] = size;
+ hb->levels[i] = g_realloc(hb->levels[i], size * sizeof(unsigned long));
+ if (!shrink) {
+ memset(&hb->levels[i][old], 0x00,
+ (size - old) * sizeof(*hb->levels[i]));
+ }
+ }
+}
+
+
/**
* Given HBitmaps A and B, let A := A (BITOR) B.
* Bitmap B will not be modified.
--
2.1.0
next prev parent reply other threads:[~2015-04-17 23:50 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-17 23:49 [Qemu-devel] [PATCH v6 00/21] block: transactionless incremental backup series John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 01/21] docs: incremental backup documentation John Snow
2015-04-22 16:17 ` Max Reitz
2015-04-22 19:20 ` Eric Blake
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 02/21] qapi: Add optional field "name" to block dirty bitmap John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 03/21] qmp: Ensure consistent granularity type John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 04/21] qmp: Add block-dirty-bitmap-add and block-dirty-bitmap-remove John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 05/21] block: Introduce bdrv_dirty_bitmap_granularity() John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 06/21] hbitmap: cache array lengths John Snow
2015-04-23 13:39 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 07/21] hbitmap: add hbitmap_merge John Snow
2015-04-22 16:22 ` Max Reitz
2015-04-22 22:00 ` Eric Blake
2015-04-23 13:40 ` Stefan Hajnoczi
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 08/21] block: Add bitmap disabled status John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 09/21] block: Add bitmap successors John Snow
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 10/21] qmp: Add support of "dirty-bitmap" sync mode for drive-backup John Snow
2015-04-22 16:33 ` Max Reitz
2015-04-22 22:11 ` Eric Blake
2015-04-23 13:47 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-17 23:49 ` [Qemu-devel] [PATCH v6 11/21] qmp: add block-dirty-bitmap-clear John Snow
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 12/21] qmp: Add dirty bitmap status field in query-block John Snow
2015-04-22 22:18 ` Eric Blake
2015-04-22 22:22 ` John Snow
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 13/21] block: add BdrvDirtyBitmap documentation John Snow
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 14/21] block: Ensure consistent bitmap function prototypes John Snow
2015-04-17 23:50 ` John Snow [this message]
2015-04-22 16:35 ` [Qemu-devel] [PATCH v6 15/21] block: Resize bitmaps on bdrv_truncate Max Reitz
2015-04-23 13:51 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 16/21] hbitmap: truncate tests John Snow
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 17/21] iotests: add invalid input incremental backup tests John Snow
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 18/21] iotests: add QMP event waiting queue John Snow
2015-04-22 16:50 ` Max Reitz
2015-04-23 14:24 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 19/21] iotests: add simple incremental backup case John Snow
2015-04-23 14:28 ` Stefan Hajnoczi
2015-05-22 15:02 ` Kevin Wolf
2015-05-22 15:29 ` John Snow
2015-05-22 15:37 ` Kevin Wolf
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 20/21] iotests: add incremental backup failure recovery test John Snow
2015-04-23 14:28 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-11-27 17:14 ` [Qemu-devel] " Kevin Wolf
2015-11-30 17:17 ` John Snow
2015-12-01 9:31 ` Kevin Wolf
2015-04-17 23:50 ` [Qemu-devel] [PATCH v6 21/21] iotests: add incremental backup granularity tests John Snow
2015-04-23 14:29 ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-04-23 13:19 ` [Qemu-devel] [Qemu-block] [PATCH v6 00/21] block: transactionless incremental backup series Stefan Hajnoczi
2015-04-23 14:41 ` John Snow
2015-04-23 19:18 ` Eric Blake
2015-04-23 19:40 ` John Snow
2015-04-24 8:37 ` Stefan Hajnoczi
2015-04-24 14:02 ` [Qemu-devel] " Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429314609-29776-16-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=armbru@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
--cc=vsementsov@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).