From: Eric Auger <eric.auger@linaro.org>
To: eric.auger@st.com, eric.auger@linaro.org, qemu-devel@nongnu.org,
peter.maydell@linaro.org, agraf@suse.de, pbonzini@redhat.com
Cc: alex.williamson@redhat.com, kvmarm@lists.cs.columbia.edu,
christoffer.dall@linaro.org, patches@linaro.org
Subject: [Qemu-devel] [PATCH v2 1/2] kvm-all.c: add qemu_irq/gsi hash table and utility routines
Date: Thu, 23 Apr 2015 16:08:35 +0100 [thread overview]
Message-ID: <1429801716-8027-2-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1429801716-8027-1-git-send-email-eric.auger@linaro.org>
VFIO platform device needs to setup irqfd but it does not know the
gsi corresponding to the device qemu_irq. This series proposes to
store a hash table in kvm_state using the qemu_irq as key and the gsi
as a value.
kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
controller is supposed to use it.
kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier allows to setup/tear down
irqfd directly from the qemu_irq.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
include/sysemu/kvm.h | 6 ++++++
kvm-all.c | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 197e6c0..911aaa8 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -18,6 +18,7 @@
#include "config-host.h"
#include "qemu/queue.h"
#include "qom/cpu.h"
+#include "hw/irq.h"
#ifdef CONFIG_KVM
#include <linux/kvm.h>
@@ -416,6 +417,11 @@ int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter);
int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
EventNotifier *rn, int virq);
int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n, int virq);
+int kvm_irqchip_add_qemuirq_irqfd_notifier(KVMState *s, EventNotifier *n,
+ EventNotifier *rn, qemu_irq irq);
+int kvm_irqchip_remove_qemuirq_irqfd_notifier(KVMState *s, EventNotifier *n,
+ qemu_irq irq);
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi);
void kvm_pc_gsi_handler(void *opaque, int n, int level);
void kvm_pc_setup_irq_routing(bool pci_enabled);
void kvm_init_irq_routing(KVMState *s);
diff --git a/kvm-all.c b/kvm-all.c
index dd44f8c..ec9f4ac 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -37,6 +37,7 @@
#include "exec/address-spaces.h"
#include "qemu/event_notifier.h"
#include "trace.h"
+#include "hw/irq.h"
#include "hw/boards.h"
@@ -99,6 +100,7 @@ struct KVMState
* unsigned, and treating them as signed here can break things */
unsigned irq_set_ioctl;
unsigned int sigmask_len;
+ GHashTable *gsimap;
#ifdef KVM_CAP_IRQ_ROUTING
struct kvm_irq_routing *irq_routes;
int nr_allocated_irq_routes;
@@ -1381,6 +1383,37 @@ int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n, int virq)
false);
}
+int kvm_irqchip_add_qemuirq_irqfd_notifier(KVMState *s, EventNotifier *n,
+ EventNotifier *rn, qemu_irq irq)
+{
+ gpointer key, gsi;
+ gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+ if (!found) {
+ return -ENXIO;
+ } else {
+ return kvm_irqchip_add_irqfd_notifier(s, n, rn, GPOINTER_TO_UINT(gsi));
+ }
+}
+
+int kvm_irqchip_remove_qemuirq_irqfd_notifier(KVMState *s, EventNotifier *n,
+ qemu_irq irq)
+{
+ gpointer key, gsi;
+ gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+ if (!found) {
+ return -ENXIO;
+ } else {
+ return kvm_irqchip_remove_irqfd_notifier(s, n, GPOINTER_TO_INT(gsi));
+ }
+}
+
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi)
+{
+ g_hash_table_insert(s->gsimap, irq, GINT_TO_POINTER(gsi));
+}
+
static int kvm_irqchip_create(MachineState *machine, KVMState *s)
{
int ret;
@@ -1413,6 +1446,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)
kvm_init_irq_routing(s);
+ s->gsimap = g_hash_table_new(g_direct_hash, g_direct_equal);
+
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2015-04-23 15:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-23 15:08 [Qemu-devel] [PATCH v2 0/2] add qemu_irq/gsi hashtable Eric Auger
2015-04-23 15:08 ` Eric Auger [this message]
2015-04-23 15:22 ` [Qemu-devel] [PATCH v2 1/2] kvm-all.c: add qemu_irq/gsi hash table and utility routines Paolo Bonzini
2015-04-23 15:21 ` Eric Auger
2015-04-23 15:08 ` [Qemu-devel] [PATCH v2 2/2] intc: arm_gic_kvm: set the qemu_irq/gsi mapping Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429801716-8027-2-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=agraf@suse.de \
--cc=alex.williamson@redhat.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@st.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).