From: Eric Auger <eric.auger@linaro.org>
To: eric.auger@st.com, eric.auger@linaro.org, qemu-devel@nongnu.org,
pbonzini@redhat.com, peter.crosthwaite@xilinx.com
Cc: alex.williamson@redhat.com, kvmarm@lists.cs.columbia.edu,
christoffer.dall@linaro.org, patches@linaro.org
Subject: [Qemu-devel] [PATCH 2/3] qdev: check callback takes Object **target as third argument
Date: Tue, 28 Apr 2015 10:18:02 +0100 [thread overview]
Message-ID: <1430212683-10984-3-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1430212683-10984-1-git-send-email-eric.auger@linaro.org>
Check callback now takes as third argument an Object **. In
object_set_link_property, we pass the property child as argument.
We also assign the *child before the check call so that enhanced
check can be performed in the callback. In case the check fails,
the old value is restored and ref count is left unchanged.
This typically makes possible to do checks both on the *child
content (for instance a qemu_irq) and also perform some actions/
checks on its container, which was not possible before.
This is typically useful for starting irqfd setup in vfio platform
use case.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
hw/core/qdev-properties.c | 2 +-
include/hw/qdev-properties.h | 2 +-
include/qom/object.h | 7 +++----
qom/object.c | 15 +++++++++------
4 files changed, 14 insertions(+), 12 deletions(-)
diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c
index 570d5f0..a42f9d4 100644
--- a/hw/core/qdev-properties.c
+++ b/hw/core/qdev-properties.c
@@ -22,7 +22,7 @@ void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
}
void qdev_prop_allow_set_link_before_realize(Object *obj, const char *name,
- Object *val, Error **errp)
+ Object **target, Error **errp)
{
DeviceState *dev = DEVICE(obj);
diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h
index d67dad5..b2868be 100644
--- a/include/hw/qdev-properties.h
+++ b/include/hw/qdev-properties.h
@@ -213,6 +213,6 @@ void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
* object_property_add_link().
*/
void qdev_prop_allow_set_link_before_realize(Object *obj, const char *name,
- Object *val, Error **errp);
+ Object **target, Error **errp);
#endif
diff --git a/include/qom/object.h b/include/qom/object.h
index 4687fa1..0a7daff 100644
--- a/include/qom/object.h
+++ b/include/qom/object.h
@@ -34,7 +34,7 @@ typedef struct InterfaceClass InterfaceClass;
typedef struct InterfaceInfo InterfaceInfo;
typedef void (*object_property_set_link_t)(Object *, const char *,
- Object *, Error **);
+ Object **, Error **);
#define TYPE_OBJECT "object"
@@ -1136,7 +1136,7 @@ typedef enum {
* an error.
*/
void object_property_allow_set_link(Object *, const char *,
- Object *, Error **);
+ Object **, Error **);
/**
* object_property_add_link:
@@ -1168,8 +1168,7 @@ void object_property_allow_set_link(Object *, const char *,
*/
void object_property_add_link(Object *obj, const char *name,
const char *type, Object **child,
- void (*check)(Object *obj, const char *name,
- Object *val, Error **errp),
+ object_property_set_link_t check,
ObjectPropertyLinkFlags flags,
Error **errp);
diff --git a/qom/object.c b/qom/object.c
index b8dff43..cc9ed87 100644
--- a/qom/object.c
+++ b/qom/object.c
@@ -1112,14 +1112,14 @@ out:
}
void object_property_allow_set_link(Object *obj, const char *name,
- Object *val, Error **errp)
+ Object **target, Error **errp)
{
/* Allow the link to be set, always */
}
typedef struct {
Object **child;
- void (*check)(Object *, const char *, Object *, Error **);
+ void (*check)(Object *, const char *, Object **, Error **);
ObjectPropertyLinkFlags flags;
} LinkProperty;
@@ -1201,14 +1201,17 @@ static void object_set_link_property(Object *obj, Visitor *v, void *opaque,
return;
}
- prop->check(obj, name, new_target, &local_err);
+ object_ref(new_target);
+ *child = new_target;
+
+ prop->check(obj, name, child, &local_err);
if (local_err) {
error_propagate(errp, local_err);
+ *child = old_target;
+ object_ref(new_target);
return;
}
- object_ref(new_target);
- *child = new_target;
object_unref(old_target);
}
@@ -1233,7 +1236,7 @@ static void object_release_link_property(Object *obj, const char *name,
void object_property_add_link(Object *obj, const char *name,
const char *type, Object **child,
void (*check)(Object *, const char *,
- Object *, Error **),
+ Object **, Error **),
ObjectPropertyLinkFlags flags,
Error **errp)
{
--
1.8.3.2
next prev parent reply other threads:[~2015-04-28 9:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 9:18 [Qemu-devel] [PATCH 0/3] Extend check callback usability for irq connect notifier Eric Auger
2015-04-28 9:18 ` [Qemu-devel] [PATCH 1/3] qdev: pass the check callback to qdev_init_gpio_out_named Eric Auger
2015-04-28 9:18 ` Eric Auger [this message]
2015-04-28 11:47 ` [Qemu-devel] [PATCH 2/3] qdev: check callback takes Object **target as third argument Paolo Bonzini
2015-04-28 9:18 ` [Qemu-devel] [PATCH 3/3] sysbus: add irq_set_hook Eric Auger
2015-04-28 18:21 ` [Qemu-devel] [PATCH 0/3] Extend check callback usability for irq connect notifier Peter Crosthwaite
2015-04-29 7:43 ` Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430212683-10984-3-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=alex.williamson@redhat.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@st.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).