qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 11/22] gus: clean up MemoryRegionPortio
Date: Tue, 28 Apr 2015 16:40:18 +0200	[thread overview]
Message-ID: <1430232029-9457-12-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1430232029-9457-1-git-send-email-pbonzini@redhat.com>

Remove 16-bit reads/writes, since ioport.c is able to synthesize them.
Remove the two MIDI registers (0x300 and 0x301) from gus_portio_list1,
and add the second MIDI register (0x301) to gus_portio_list2.

Tested with Second Reality.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/audio/gus.c | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

diff --git a/hw/audio/gus.c b/hw/audio/gus.c
index 4a43ce7..86223a9 100644
--- a/hw/audio/gus.c
+++ b/hw/audio/gus.c
@@ -71,13 +71,6 @@ IO_READ_PROTO (gus_readb)
     return gus_read (&s->emu, nport, 1);
 }
 
-IO_READ_PROTO (gus_readw)
-{
-    GUSState *s = opaque;
-
-    return gus_read (&s->emu, nport, 2);
-}
-
 IO_WRITE_PROTO (gus_writeb)
 {
     GUSState *s = opaque;
@@ -85,13 +78,6 @@ IO_WRITE_PROTO (gus_writeb)
     gus_write (&s->emu, nport, 1, val);
 }
 
-IO_WRITE_PROTO (gus_writew)
-{
-    GUSState *s = opaque;
-
-    gus_write (&s->emu, nport, 2, val);
-}
-
 static int write_audio (GUSState *s, int samples)
 {
     int net = 0;
@@ -236,17 +222,13 @@ static const VMStateDescription vmstate_gus = {
 
 static const MemoryRegionPortio gus_portio_list1[] = {
     {0x000,  1, 1, .write = gus_writeb },
-    {0x000,  1, 2, .write = gus_writew },
     {0x006, 10, 1, .read = gus_readb, .write = gus_writeb },
-    {0x006, 10, 2, .read = gus_readw, .write = gus_writew },
     {0x100,  8, 1, .read = gus_readb, .write = gus_writeb },
-    {0x100,  8, 2, .read = gus_readw, .write = gus_writew },
     PORTIO_END_OF_LIST (),
 };
 
 static const MemoryRegionPortio gus_portio_list2[] = {
-    {0, 1, 1, .read = gus_readb },
-    {0, 1, 2, .read = gus_readw },
+    {0, 2, 1, .read = gus_readb },
     PORTIO_END_OF_LIST (),
 };
 
-- 
2.3.5

  parent reply	other threads:[~2015-04-28 14:41 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28 14:40 [Qemu-devel] [PULL 00/22] Memory, TCG, NBD, build system changes for 2015-04-27 Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 01/22] translate-all: use glib for all page descriptor allocations Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 02/22] exec: Atomic access to bounce buffer Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 03/22] linux-user, bsd-user: Remove two calls to cpu_exec_init_all Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 04/22] exec: Protect map_client_list with mutex Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 05/22] exec: Notify cpu_register_map_client caller if the bounce buffer is available Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 06/22] dma-helpers: Fix race condition of continue_after_map_failure and dma_aio_cancel Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 07/22] memory: add memory_region_ram_resize Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 08/22] acpi-build: remove dependency from ram_addr.h Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 09/22] sun4m: fix slavio sysctrl and led register sizes Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 10/22] sb16: remove useless mixer_write_indexw Paolo Bonzini
2015-04-28 14:40 ` Paolo Bonzini [this message]
2015-04-28 14:40 ` [Qemu-devel] [PULL 12/22] ide: there is only one data port Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 13/22] ioport: remove wrong comment Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 14/22] ioport: loosen assertions on emulation of 16-bit ports Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 15/22] ioport: reserve the whole range of an I/O port in the AddressSpace Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 16/22] exec: Respect as_translate_internal length clamp Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 17/22] configure: Add support for tcmalloc Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 18/22] milkymist: do not modify libs-softmmu Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 19/22] Makefile.target: prepend $libs_softmmu to $LIBS Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 20/22] target-i386: disable LINT0 after reset Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 21/22] translate-all: use bitmap helpers for PageDesc's bitmap Paolo Bonzini
2015-04-28 14:40 ` [Qemu-devel] [PULL 22/22] nbd/trivial: fix type cast for ioctl Paolo Bonzini
2015-04-28 15:54 ` [Qemu-devel] [PULL 00/22] Memory, TCG, NBD, build system changes for 2015-04-27 Peter Maydell
2015-04-29  1:53   ` Fam Zheng
2015-04-29  8:15     ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430232029-9457-12-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).