From: Eric Auger <eric.auger@linaro.org>
To: eric.auger@st.com, eric.auger@linaro.org, qemu-devel@nongnu.org,
alex.williamson@redhat.com, agraf@suse.de, pbonzini@redhat.com,
peter.crosthwaite@xilinx.com
Cc: peter.maydell@linaro.org, kim.phillips@freescale.com,
b.reynal@virtualopensystems.com, vikrams@codeaurora.org,
patches@linaro.org, Bharat.Bhushan@freescale.com,
alex.bennee@linaro.org, kvmarm@lists.cs.columbia.edu,
christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v13 07/12] kvm-all.c: add qemu_irq/gsi hash table and utility routines
Date: Tue, 28 Apr 2015 17:51:08 +0100 [thread overview]
Message-ID: <1430239873-31950-8-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1430239873-31950-1-git-send-email-eric.auger@linaro.org>
VFIO platform device needs to setup irqfd but it does not know the
gsi corresponding to the device qemu_irq. This series proposes to
store a hash table in kvm_state using the qemu_irq as key and the gsi
as a value.
kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
controller is supposed to use it.
kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
irqfd directly from the qemu_irq.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
v2 -> v3:
- rename kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier into
kvm_irqchip_[add, remove]_irqfd_notifier. Possible since legacy
functions were also renamed with _gsi suffix.
V1 -> v2:
- qemu_irq get_gsi callback replaced by hash table stored in kvm
---
include/sysemu/kvm.h | 6 ++++++
kvm-all.c | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 0f28d6f..bc3f230 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -18,6 +18,7 @@
#include "config-host.h"
#include "qemu/queue.h"
#include "qom/cpu.h"
+#include "hw/irq.h"
#ifdef CONFIG_KVM
#include <linux/kvm.h>
@@ -417,6 +418,11 @@ int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
EventNotifier *rn, int virq);
int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
int virq);
+int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
+ EventNotifier *rn, qemu_irq irq);
+int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
+ qemu_irq irq);
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi);
void kvm_pc_gsi_handler(void *opaque, int n, int level);
void kvm_pc_setup_irq_routing(bool pci_enabled);
void kvm_init_irq_routing(KVMState *s);
diff --git a/kvm-all.c b/kvm-all.c
index 42bb923..6531062 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -37,6 +37,7 @@
#include "exec/address-spaces.h"
#include "qemu/event_notifier.h"
#include "trace.h"
+#include "hw/irq.h"
#include "hw/boards.h"
@@ -99,6 +100,7 @@ struct KVMState
* unsigned, and treating them as signed here can break things */
unsigned irq_set_ioctl;
unsigned int sigmask_len;
+ GHashTable *gsimap;
#ifdef KVM_CAP_IRQ_ROUTING
struct kvm_irq_routing *irq_routes;
int nr_allocated_irq_routes;
@@ -1382,6 +1384,37 @@ int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
false);
}
+int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
+ EventNotifier *rn, qemu_irq irq)
+{
+ gpointer key, gsi;
+ gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+ if (!found) {
+ return -ENXIO;
+ } else {
+ return kvm_irqchip_add_irqfd_notifier_gsi(s, n, rn, GPOINTER_TO_UINT(gsi));
+ }
+}
+
+int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
+ qemu_irq irq)
+{
+ gpointer key, gsi;
+ gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+ if (!found) {
+ return -ENXIO;
+ } else {
+ return kvm_irqchip_remove_irqfd_notifier_gsi(s, n, GPOINTER_TO_INT(gsi));
+ }
+}
+
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi)
+{
+ g_hash_table_insert(s->gsimap, irq, GINT_TO_POINTER(gsi));
+}
+
static int kvm_irqchip_create(MachineState *machine, KVMState *s)
{
int ret;
@@ -1414,6 +1447,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)
kvm_init_irq_routing(s);
+ s->gsimap = g_hash_table_new(g_direct_hash, g_direct_equal);
+
return 0;
}
--
1.8.3.2
next prev parent reply other threads:[~2015-04-28 16:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 16:51 [Qemu-devel] [PATCH v13 00/12] KVM platform device passthrough Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 01/12] linux-headers: update headers according to 4.1-rc0 Eric Auger
2015-04-29 10:36 ` Christian Borntraeger
2015-04-29 11:11 ` Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 02/12] hw/vfio/platform: vfio-platform skeleton Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 03/12] hw/vfio/platform: add irq assignment Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 04/12] hw/vfio/platform: calxeda xgmac device Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 05/12] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 06/12] kvm: rename kvm_irqchip_[add, remove]_irqfd_notifier with gsi suffix Eric Auger
2015-04-28 16:51 ` Eric Auger [this message]
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 08/12] intc: arm_gic_kvm: set the qemu_irq/gsi mapping Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 09/12] qdev: pass the check callback to qdev_init_gpio_out_named Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 10/12] qdev: check callback takes the property child as third argument Eric Auger
2015-04-29 8:22 ` Paolo Bonzini
2015-04-29 8:37 ` Eric Auger
2015-04-29 11:12 ` Paolo Bonzini
2015-04-29 11:10 ` Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 11/12] sysbus: add irq_set_hook Eric Auger
2015-04-28 16:51 ` [Qemu-devel] [PATCH v13 12/12] hw/vfio/platform: add irqfd support Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430239873-31950-8-git-send-email-eric.auger@linaro.org \
--to=eric.auger@linaro.org \
--cc=Bharat.Bhushan@freescale.com \
--cc=agraf@suse.de \
--cc=alex.bennee@linaro.org \
--cc=alex.williamson@redhat.com \
--cc=b.reynal@virtualopensystems.com \
--cc=christoffer.dall@linaro.org \
--cc=eric.auger@st.com \
--cc=kim.phillips@freescale.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=patches@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=vikrams@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).