qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@linaro.org>
To: eric.auger@st.com, eric.auger@linaro.org, qemu-devel@nongnu.org,
	alex.williamson@redhat.com, agraf@suse.de, pbonzini@redhat.com,
	peter.crosthwaite@xilinx.com
Cc: peter.maydell@linaro.org, kvmarm@lists.cs.columbia.edu,
	christoffer.dall@linaro.org, patches@linaro.org
Subject: [Qemu-devel] [PATCH v15 07/10] kvm-all.c: add qemu_irq/gsi hash table and utility routines
Date: Thu, 30 Apr 2015 13:49:12 +0100	[thread overview]
Message-ID: <1430398155-11214-8-git-send-email-eric.auger@linaro.org> (raw)
In-Reply-To: <1430398155-11214-1-git-send-email-eric.auger@linaro.org>

VFIO platform device needs to setup irqfd but it does not know the
gsi corresponding to the device qemu_irq. This series proposes to
store a hash table in kvm_state using the qemu_irq as key and the gsi
as a value.

kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt
controller is supposed to use it.

kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down
irqfd directly from the qemu_irq.

Signed-off-by: Eric Auger <eric.auger@linaro.org>

---
v13 -> v14:
- correct checkpatch warning

v2 -> v3 (integration into VFIO series v13):
- rename kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier into
  kvm_irqchip_[add, remove]_irqfd_notifier. Possible since legacy
  functions were also renamed with _gsi suffix.

V1 -> v2:
- qemu_irq get_gsi callback replaced by hash table stored in kvm
---
 include/sysemu/kvm.h |  6 ++++++
 kvm-all.c            | 37 +++++++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 0f28d6f..bc3f230 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -18,6 +18,7 @@
 #include "config-host.h"
 #include "qemu/queue.h"
 #include "qom/cpu.h"
+#include "hw/irq.h"
 
 #ifdef CONFIG_KVM
 #include <linux/kvm.h>
@@ -417,6 +418,11 @@ int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
                                        EventNotifier *rn, int virq);
 int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
                                           int virq);
+int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
+                                   EventNotifier *rn, qemu_irq irq);
+int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
+                                      qemu_irq irq);
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi);
 void kvm_pc_gsi_handler(void *opaque, int n, int level);
 void kvm_pc_setup_irq_routing(bool pci_enabled);
 void kvm_init_irq_routing(KVMState *s);
diff --git a/kvm-all.c b/kvm-all.c
index 42bb923..d2cb7ed 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -37,6 +37,7 @@
 #include "exec/address-spaces.h"
 #include "qemu/event_notifier.h"
 #include "trace.h"
+#include "hw/irq.h"
 
 #include "hw/boards.h"
 
@@ -99,6 +100,7 @@ struct KVMState
      * unsigned, and treating them as signed here can break things */
     unsigned irq_set_ioctl;
     unsigned int sigmask_len;
+    GHashTable *gsimap;
 #ifdef KVM_CAP_IRQ_ROUTING
     struct kvm_irq_routing *irq_routes;
     int nr_allocated_irq_routes;
@@ -1382,6 +1384,39 @@ int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n,
            false);
 }
 
+int kvm_irqchip_add_irqfd_notifier(KVMState *s, EventNotifier *n,
+                                   EventNotifier *rn, qemu_irq irq)
+{
+    gpointer key, gsi;
+    gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+    if (!found) {
+        return -ENXIO;
+    } else {
+        return kvm_irqchip_add_irqfd_notifier_gsi(s, n, rn,
+                                                  GPOINTER_TO_UINT(gsi));
+    }
+}
+
+int kvm_irqchip_remove_irqfd_notifier(KVMState *s, EventNotifier *n,
+                                      qemu_irq irq)
+{
+    gpointer key, gsi;
+    gboolean found = g_hash_table_lookup_extended(s->gsimap, irq, &key, &gsi);
+
+    if (!found) {
+        return -ENXIO;
+    } else {
+        return kvm_irqchip_remove_irqfd_notifier_gsi(s, n,
+                                                     GPOINTER_TO_INT(gsi));
+    }
+}
+
+void kvm_irqchip_set_qemuirq_gsi(KVMState *s, qemu_irq irq, int gsi)
+{
+    g_hash_table_insert(s->gsimap, irq, GINT_TO_POINTER(gsi));
+}
+
 static int kvm_irqchip_create(MachineState *machine, KVMState *s)
 {
     int ret;
@@ -1414,6 +1449,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)
 
     kvm_init_irq_routing(s);
 
+    s->gsimap = g_hash_table_new(g_direct_hash, g_direct_equal);
+
     return 0;
 }
 
-- 
1.8.3.2

  parent reply	other threads:[~2015-04-30 12:49 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-30 12:49 [Qemu-devel] [PATCH v15 00/10] KVM platform device passthrough Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 01/10] linux-headers: update Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 02/10] hw/vfio/platform: vfio-platform skeleton Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 03/10] hw/vfio/platform: add irq assignment Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 04/10] hw/vfio/platform: calxeda xgmac device Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 05/10] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 06/10] kvm: rename kvm_irqchip_[add, remove]_irqfd_notifier with gsi suffix Eric Auger
2015-04-30 12:49 ` Eric Auger [this message]
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 08/10] intc: arm_gic_kvm: set the qemu_irq/gsi mapping Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 09/10] sysbus: add irq_routing_notifier Eric Auger
2015-04-30 12:49 ` [Qemu-devel] [PATCH v15 10/10] hw/vfio/platform: add irqfd support Eric Auger
2015-05-06  6:11 ` [Qemu-devel] [PATCH v15 00/10] KVM platform device passthrough Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430398155-11214-8-git-send-email-eric.auger@linaro.org \
    --to=eric.auger@linaro.org \
    --cc=agraf@suse.de \
    --cc=alex.williamson@redhat.com \
    --cc=christoffer.dall@linaro.org \
    --cc=eric.auger@st.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=patches@linaro.org \
    --cc=pbonzini@redhat.com \
    --cc=peter.crosthwaite@xilinx.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).