qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: Yang Zhang <yang.z.zhang@intel.com>, Liang Li <liang.z.li@intel.com>
Subject: [Qemu-devel] [PULL 08/16] migration: Add the core code of multi-thread compression
Date: Thu,  7 May 2015 13:50:36 +0200	[thread overview]
Message-ID: <1430999444-24315-9-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1430999444-24315-1-git-send-email-quintela@redhat.com>

From: Liang Li <liang.z.li@intel.com>

Implement the core logic of the multiple thread compression. At this
point, multiple thread compression can't co-work with xbzrle yet.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
 arch_init.c | 184 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 177 insertions(+), 7 deletions(-)

diff --git a/arch_init.c b/arch_init.c
index 48cae22..9f63c0f 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -355,12 +355,33 @@ static DecompressParam *decomp_param;
 static QemuThread *decompress_threads;
 static uint8_t *compressed_data_buf;

+static int do_compress_ram_page(CompressParam *param);
+
 static void *do_data_compress(void *opaque)
 {
-    while (!quit_comp_thread) {
+    CompressParam *param = opaque;

-    /* To be done */
+    while (!quit_comp_thread) {
+        qemu_mutex_lock(&param->mutex);
+        /* Re-check the quit_comp_thread in case of
+         * terminate_compression_threads is called just before
+         * qemu_mutex_lock(&param->mutex) and after
+         * while(!quit_comp_thread), re-check it here can make
+         * sure the compression thread terminate as expected.
+         */
+        while (!param->start && !quit_comp_thread) {
+            qemu_cond_wait(&param->cond, &param->mutex);
+        }
+        if (!quit_comp_thread) {
+            do_compress_ram_page(param);
+        }
+        param->start = false;
+        qemu_mutex_unlock(&param->mutex);

+        qemu_mutex_lock(comp_done_lock);
+        param->done = true;
+        qemu_cond_signal(comp_done_cond);
+        qemu_mutex_unlock(comp_done_lock);
     }

     return NULL;
@@ -368,9 +389,15 @@ static void *do_data_compress(void *opaque)

 static inline void terminate_compression_threads(void)
 {
-    quit_comp_thread = true;
+    int idx, thread_count;

-    /* To be done */
+    thread_count = migrate_compress_threads();
+    quit_comp_thread = true;
+    for (idx = 0; idx < thread_count; idx++) {
+        qemu_mutex_lock(&comp_param[idx].mutex);
+        qemu_cond_signal(&comp_param[idx].cond);
+        qemu_mutex_unlock(&comp_param[idx].mutex);
+    }
 }

 void migrate_compress_threads_join(void)
@@ -420,6 +447,7 @@ void migrate_compress_threads_create(void)
          * it's ops to empty.
          */
         comp_param[i].file = qemu_fopen_ops(NULL, &empty_ops);
+        comp_param[i].done = true;
         qemu_mutex_init(&comp_param[i].mutex);
         qemu_cond_init(&comp_param[i].cond);
         qemu_thread_create(compress_threads + i, "compress",
@@ -829,6 +857,97 @@ static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,
     return pages;
 }

+static int do_compress_ram_page(CompressParam *param)
+{
+    int bytes_sent, blen;
+    uint8_t *p;
+    RAMBlock *block = param->block;
+    ram_addr_t offset = param->offset;
+
+    p = memory_region_get_ram_ptr(block->mr) + (offset & TARGET_PAGE_MASK);
+
+    bytes_sent = save_page_header(param->file, block, offset |
+                                  RAM_SAVE_FLAG_COMPRESS_PAGE);
+    blen = qemu_put_compression_data(param->file, p, TARGET_PAGE_SIZE,
+                                     migrate_compress_level());
+    bytes_sent += blen;
+    atomic_inc(&acct_info.norm_pages);
+
+    return bytes_sent;
+}
+
+static inline void start_compression(CompressParam *param)
+{
+    param->done = false;
+    qemu_mutex_lock(&param->mutex);
+    param->start = true;
+    qemu_cond_signal(&param->cond);
+    qemu_mutex_unlock(&param->mutex);
+}
+
+
+static uint64_t bytes_transferred;
+
+static void flush_compressed_data(QEMUFile *f)
+{
+    int idx, len, thread_count;
+
+    if (!migrate_use_compression()) {
+        return;
+    }
+    thread_count = migrate_compress_threads();
+    for (idx = 0; idx < thread_count; idx++) {
+        if (!comp_param[idx].done) {
+            qemu_mutex_lock(comp_done_lock);
+            while (!comp_param[idx].done && !quit_comp_thread) {
+                qemu_cond_wait(comp_done_cond, comp_done_lock);
+            }
+            qemu_mutex_unlock(comp_done_lock);
+        }
+        if (!quit_comp_thread) {
+            len = qemu_put_qemu_file(f, comp_param[idx].file);
+            bytes_transferred += len;
+        }
+    }
+}
+
+static inline void set_compress_params(CompressParam *param, RAMBlock *block,
+                                       ram_addr_t offset)
+{
+    param->block = block;
+    param->offset = offset;
+}
+
+static int compress_page_with_multi_thread(QEMUFile *f, RAMBlock *block,
+                                           ram_addr_t offset,
+                                           uint64_t *bytes_transferred)
+{
+    int idx, thread_count, bytes_xmit = -1, pages = -1;
+
+    thread_count = migrate_compress_threads();
+    qemu_mutex_lock(comp_done_lock);
+    while (true) {
+        for (idx = 0; idx < thread_count; idx++) {
+            if (comp_param[idx].done) {
+                bytes_xmit = qemu_put_qemu_file(f, comp_param[idx].file);
+                set_compress_params(&comp_param[idx], block, offset);
+                start_compression(&comp_param[idx]);
+                pages = 1;
+                *bytes_transferred += bytes_xmit;
+                break;
+            }
+        }
+        if (pages > 0) {
+            break;
+        } else {
+            qemu_cond_wait(comp_done_cond, comp_done_lock);
+        }
+    }
+    qemu_mutex_unlock(comp_done_lock);
+
+    return pages;
+}
+
 /**
  * ram_save_compressed_page: compress the given page and send it to the stream
  *
@@ -845,8 +964,59 @@ static int ram_save_compressed_page(QEMUFile *f, RAMBlock *block,
                                     uint64_t *bytes_transferred)
 {
     int pages = -1;
+    uint64_t bytes_xmit;
+    MemoryRegion *mr = block->mr;
+    uint8_t *p;
+    int ret;
+
+    p = memory_region_get_ram_ptr(mr) + offset;

-    /* To be done*/
+    bytes_xmit = 0;
+    ret = ram_control_save_page(f, block->offset,
+                                offset, TARGET_PAGE_SIZE, &bytes_xmit);
+    if (bytes_xmit) {
+        *bytes_transferred += bytes_xmit;
+        pages = 1;
+    }
+    if (block == last_sent_block) {
+        offset |= RAM_SAVE_FLAG_CONTINUE;
+    }
+    if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
+        if (ret != RAM_SAVE_CONTROL_DELAYED) {
+            if (bytes_xmit > 0) {
+                acct_info.norm_pages++;
+            } else if (bytes_xmit == 0) {
+                acct_info.dup_pages++;
+            }
+        }
+    } else {
+        /* When starting the process of a new block, the first page of
+         * the block should be sent out before other pages in the same
+         * block, and all the pages in last block should have been sent
+         * out, keeping this order is important, because the 'cont' flag
+         * is used to avoid resending the block name.
+         */
+        if (block != last_sent_block) {
+            flush_compressed_data(f);
+            pages = save_zero_page(f, block, offset, p, bytes_transferred);
+            if (pages == -1) {
+                set_compress_params(&comp_param[0], block, offset);
+                /* Use the qemu thread to compress the data to make sure the
+                 * first page is sent out before other pages
+                 */
+                bytes_xmit = do_compress_ram_page(&comp_param[0]);
+                qemu_put_qemu_file(f, comp_param[0].file);
+                *bytes_transferred += bytes_xmit;
+                pages = 1;
+            }
+        } else {
+            pages = save_zero_page(f, block, offset, p, bytes_transferred);
+            if (pages == -1) {
+                pages = compress_page_with_multi_thread(f, block, offset,
+                                                        bytes_transferred);
+            }
+        }
+    }

     return pages;
 }
@@ -914,8 +1084,6 @@ static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
     return pages;
 }

-static uint64_t bytes_transferred;
-
 void acct_update_position(QEMUFile *f, size_t size, bool zero)
 {
     uint64_t pages = size / TARGET_PAGE_SIZE;
@@ -1129,6 +1297,7 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
         }
         i++;
     }
+    flush_compressed_data(f);
     rcu_read_unlock();

     /*
@@ -1170,6 +1339,7 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
         }
     }

+    flush_compressed_data(f);
     ram_control_after_iterate(f, RAM_CONTROL_FINISH);
     migration_end();

-- 
2.4.0

  parent reply	other threads:[~2015-05-07 11:51 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-07 11:50 [Qemu-devel] [PULL 00/16] Migration pull request (v2) Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 01/16] docs: Add a doc about multiple thread compression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 02/16] migration: Add the framework of multi-thread compression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 03/16] migration: Add the framework of multi-thread decompression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 04/16] qemu-file: Add compression functions to QEMUFile Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 05/16] arch_init: Alloc and free data struct for compression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 06/16] arch_init: Add and free data struct for decompression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 07/16] migration: Split save_zero_page from ram_save_page Juan Quintela
2015-05-07 11:50 ` Juan Quintela [this message]
2015-05-07 11:50 ` [Qemu-devel] [PULL 09/16] migration: Make compression co-work with xbzrle Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 10/16] migration: Add the core code for decompression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 11/16] migration: Add interface to control compression Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 12/16] migration: Use an array instead of 3 parameters Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 13/16] migration: Add qmp commands to set and query parameters Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 14/16] migration: Add hmp interface " Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 15/16] migration: avoid divide by zero in xbzrle cache miss rate Juan Quintela
2015-05-07 11:50 ` [Qemu-devel] [PULL 16/16] migration: Fix migration state update issue Juan Quintela
2015-05-07 12:45 ` [Qemu-devel] [PULL 00/16] Migration pull request (v2) Peter Maydell
2015-05-07 14:43   ` Eric Blake
2015-05-07 14:56     ` Paolo Bonzini
2015-05-07 18:10   ` Amit Shah
2015-05-08  9:31     ` Stefan Hajnoczi
2015-05-11 11:04       ` Amit Shah
2015-05-11 11:37         ` Peter Maydell
2015-05-11 14:29           ` Dr. David Alan Gilbert
2015-05-11 11:47       ` Alex Bennée
  -- strict thread matches above, loose matches on Subject: below --
2015-05-07 16:46 [Qemu-devel] [PULL 00/16] Migration pull requset (take 3) Juan Quintela
2015-05-07 16:46 ` [Qemu-devel] [PULL 08/16] migration: Add the core code of multi-thread compression Juan Quintela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430999444-24315-9-git-send-email-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=liang.z.li@intel.com \
    --cc=qemu-devel@nongnu.org \
    --cc=yang.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).