From: Dimitris Aragiorgis <dimara@arrikto.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com, stefanha@redhat.com,
qemu-block@nongnu.org
Subject: [Qemu-devel] [PATCH v2 5/5] raw-posix: Introduce hdev_is_sg()
Date: Fri, 8 May 2015 20:47:22 +0300 [thread overview]
Message-ID: <1431107242-31947-6-git-send-email-dimara@arrikto.com> (raw)
In-Reply-To: <1431107242-31947-1-git-send-email-dimara@arrikto.com>
Until now, an SG device was identified only by checking if its path
started with "/dev/sg". Then, hdev_open() set bs->sg accordingly.
This is very fragile, e.g. it fails with symlinks or relative paths.
We should rely on the actual properties of the device instead of the
specified file path.
Test for an SG device (e.g. /dev/sg0) by ensuring that all of the
following holds:
- The device supports the SG_GET_VERSION_NUM ioctl
- The device supports the SG_GET_SCSI_ID ioctl
- The specified file name corresponds to a character device
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
---
block/raw-posix.c | 39 ++++++++++++++++++++++++++++-----------
1 file changed, 28 insertions(+), 11 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 8a38d02..06128db 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -57,6 +57,7 @@
#include <linux/fd.h>
#include <linux/fs.h>
#include <linux/hdreg.h>
+#include <scsi/sg.h>
#ifdef __s390__
#include <asm/dasd.h>
#endif
@@ -2073,15 +2074,38 @@ static void hdev_parse_filename(const char *filename, QDict *options,
qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
}
+static int hdev_is_sg(BlockDriverState *bs)
+{
+
+#if defined(__linux__)
+
+ struct stat st;
+ struct sg_scsi_id scsiid;
+ int sg_version;
+
+ if (!bdrv_ioctl(bs, SG_GET_VERSION_NUM, &sg_version) &&
+ !bdrv_ioctl(bs, SG_GET_SCSI_ID, &scsiid) &&
+ stat(bs->filename, &st) >= 0 && S_ISCHR(st.st_mode)) {
+ DPRINTF("SG device found: type=%d, version=%d\n",
+ scsiid.scsi_type, sg_version);
+ return 1;
+ }
+
+#endif
+
+ return 0;
+}
+
static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVRawState *s = bs->opaque;
Error *local_err = NULL;
int ret;
- const char *filename = qdict_get_str(options, "filename");
#if defined(__APPLE__) && defined(__MACH__)
+ const char *filename = qdict_get_str(options, "filename");
+
if (strstart(filename, "/dev/cdrom", NULL)) {
kern_return_t kernResult;
io_iterator_t mediaIterator;
@@ -2110,16 +2134,6 @@ static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
#endif
s->type = FTYPE_FILE;
-#if defined(__linux__)
- {
- char resolved_path[ MAXPATHLEN ], *temp;
-
- temp = realpath(filename, resolved_path);
- if (temp && strstart(temp, "/dev/sg", NULL)) {
- bs->sg = 1;
- }
- }
-#endif
ret = raw_open_common(bs, options, flags, 0, &local_err);
if (ret < 0) {
@@ -2129,6 +2143,9 @@ static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
return ret;
}
+ /* Since this does ioctl the device must be already opened */
+ bs->sg = hdev_is_sg(bs);
+
if (flags & BDRV_O_RDWR) {
ret = check_hdev_writable(s);
if (ret < 0) {
--
1.7.10.4
next prev parent reply other threads:[~2015-05-08 17:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-08 17:47 [Qemu-devel] [PATCH v2 0/5] Some fixes related to scsi-generic Dimitris Aragiorgis
2015-05-08 17:47 ` [Qemu-devel] [PATCH v2 1/5] block: Use bdrv_is_sg() everywhere Dimitris Aragiorgis
2015-05-11 10:04 ` Kevin Wolf
2015-05-08 17:47 ` [Qemu-devel] [PATCH v2 2/5] Fix migration in case of scsi-generic Dimitris Aragiorgis
2015-05-11 10:12 ` Kevin Wolf
2015-05-14 11:02 ` Dimitris Aragiorgis
2015-05-14 13:21 ` Paolo Bonzini
2015-05-08 17:47 ` [Qemu-devel] [PATCH v2 3/5] raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT Dimitris Aragiorgis
2015-05-08 20:10 ` Eric Blake
2015-05-11 16:52 ` Eric Blake
2015-05-11 10:16 ` Kevin Wolf
2015-05-11 10:21 ` Paolo Bonzini
2015-05-08 17:47 ` [Qemu-devel] [PATCH v2 4/5] raw-posix: Use DPRINTF for DEBUG_FLOPPY Dimitris Aragiorgis
2015-05-11 10:19 ` Kevin Wolf
2015-05-08 17:47 ` Dimitris Aragiorgis [this message]
2015-05-10 14:04 ` [Qemu-devel] [PATCH v2 0/5] Some fixes related to scsi-generic Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431107242-31947-6-git-send-email-dimara@arrikto.com \
--to=dimara@arrikto.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).