From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Zhu Guihua <zhugh.fnst@cn.fujitsu.com>,
Tang Chen <tangchen@cn.fujitsu.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Igor Mammedov <imammedo@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PULL 18/28] acpi, mem-hotplug: add unplug request cb for memory device
Date: Mon, 11 May 2015 14:48:07 +0200 [thread overview]
Message-ID: <1431329108-2605-19-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1431329108-2605-1-git-send-email-mst@redhat.com>
From: Tang Chen <tangchen@cn.fujitsu.com>
This patch adds unplug request cb for memory device, and adds the
is_removing boolean field to MemStatus. This field is used to indicate
whether the memory device in slot has been requested to be ejected.
This field is set to true in acpi_memory_unplug_request_cb().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
include/hw/acpi/memory_hotplug.h | 10 ++++++++++
hw/acpi/ich9.c | 10 ++++++++--
hw/acpi/memory_hotplug.c | 19 +++++++++++++++++++
hw/acpi/piix4.c | 6 +++++-
hw/i386/pc.c | 28 ++++++++++++++++++++++++++--
5 files changed, 68 insertions(+), 5 deletions(-)
diff --git a/include/hw/acpi/memory_hotplug.h b/include/hw/acpi/memory_hotplug.h
index 7bbf8a0..9d7eee9 100644
--- a/include/hw/acpi/memory_hotplug.h
+++ b/include/hw/acpi/memory_hotplug.h
@@ -7,10 +7,17 @@
#define ACPI_MEMORY_HOTPLUG_STATUS 8
+/**
+ * MemStatus:
+ * @is_removing: the memory device in slot has been requested to be ejected.
+ *
+ * This structure stores memory device's status.
+ */
typedef struct MemStatus {
DeviceState *dimm;
bool is_enabled;
bool is_inserting;
+ bool is_removing;
uint32_t ost_event;
uint32_t ost_status;
} MemStatus;
@@ -28,6 +35,9 @@ void acpi_memory_hotplug_init(MemoryRegion *as, Object *owner,
void acpi_memory_plug_cb(ACPIREGS *ar, qemu_irq irq, MemHotplugState *mem_st,
DeviceState *dev, Error **errp);
+void acpi_memory_unplug_request_cb(ACPIREGS *ar, qemu_irq irq,
+ MemHotplugState *mem_st,
+ DeviceState *dev, Error **errp);
extern const VMStateDescription vmstate_memory_hotplug;
#define VMSTATE_MEMORY_HOTPLUG(memhp, state) \
diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c
index 5352e19..b85eed4 100644
--- a/hw/acpi/ich9.c
+++ b/hw/acpi/ich9.c
@@ -400,8 +400,14 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, DeviceState *dev, Error **errp)
void ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState *dev,
Error **errp)
{
- error_setg(errp, "acpi: device unplug request for not supported device"
- " type: %s", object_get_typename(OBJECT(dev)));
+ if (pm->acpi_memory_hotplug.is_enabled &&
+ object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
+ acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq,
+ &pm->acpi_memory_hotplug, dev, errp);
+ } else {
+ error_setg(errp, "acpi: device unplug request for not supported device"
+ " type: %s", object_get_typename(OBJECT(dev)));
+ }
}
void ich9_pm_device_unplug_cb(ICH9LPCPMRegs *pm, DeviceState *dev,
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 6af9303..42fe668 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -75,6 +75,7 @@ static uint64_t acpi_memory_hotplug_read(void *opaque, hwaddr addr,
case 0x14: /* pack and return is_* fields */
val |= mdev->is_enabled ? 1 : 0;
val |= mdev->is_inserting ? 2 : 0;
+ val |= mdev->is_removing ? 4 : 0;
trace_mhp_acpi_read_flags(mem_st->selector, val);
break;
default:
@@ -218,6 +219,24 @@ void acpi_memory_plug_cb(ACPIREGS *ar, qemu_irq irq, MemHotplugState *mem_st,
return;
}
+void acpi_memory_unplug_request_cb(ACPIREGS *ar, qemu_irq irq,
+ MemHotplugState *mem_st,
+ DeviceState *dev, Error **errp)
+{
+ MemStatus *mdev;
+
+ mdev = acpi_memory_slot_status(mem_st, dev, errp);
+ if (!mdev) {
+ return;
+ }
+
+ mdev->is_removing = true;
+
+ /* Do ACPI magic */
+ ar->gpe.sts[0] |= ACPI_MEMORY_HOTPLUG_STATUS;
+ acpi_update_sci(ar, irq);
+}
+
static const VMStateDescription vmstate_memhp_sts = {
.name = "memory hotplug device state",
.version_id = 1,
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index d1f1179..f716e91 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -361,7 +361,11 @@ static void piix4_device_unplug_request_cb(HotplugHandler *hotplug_dev,
{
PIIX4PMState *s = PIIX4_PM(hotplug_dev);
- if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
+ if (s->acpi_memory_hotplug.is_enabled &&
+ object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
+ acpi_memory_unplug_request_cb(&s->ar, s->irq, &s->acpi_memory_hotplug,
+ dev, errp);
+ } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
acpi_pcihp_device_unplug_cb(&s->ar, s->irq, &s->acpi_pci_hotplug, dev,
errp);
} else {
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index a8e6be1..9b0859c 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1677,6 +1677,26 @@ out:
error_propagate(errp, local_err);
}
+static void pc_dimm_unplug_request(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ HotplugHandlerClass *hhc;
+ Error *local_err = NULL;
+ PCMachineState *pcms = PC_MACHINE(hotplug_dev);
+
+ if (!pcms->acpi_dev) {
+ error_setg(&local_err,
+ "memory hotplug is not enabled: missing acpi device");
+ goto out;
+ }
+
+ hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev);
+ hhc->unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err);
+
+out:
+ error_propagate(errp, local_err);
+}
+
static void pc_cpu_plug(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
@@ -1719,8 +1739,12 @@ static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev,
static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
- error_setg(errp, "acpi: device unplug request for not supported device"
- " type: %s", object_get_typename(OBJECT(dev)));
+ if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
+ pc_dimm_unplug_request(hotplug_dev, dev, errp);
+ } else {
+ error_setg(errp, "acpi: device unplug request for not supported device"
+ " type: %s", object_get_typename(OBJECT(dev)));
+ }
}
static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev,
--
MST
next prev parent reply other threads:[~2015-05-11 12:48 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 12:46 [Qemu-devel] [PULL 00/28] pc, virtio enhancements Michael S. Tsirkin
2015-05-11 12:46 ` [Qemu-devel] [PULL 01/28] acpi-build: close } in comment Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 02/28] hw/i386: Move ACPI header definitions in an arch-independent location Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 03/28] hw/i386/acpi-build: move generic acpi building helpers into dedictated file Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 04/28] vhost-user: Send VHOST_RESET_OWNER on vhost stop Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 05/28] virtio-net: fix the upper bound when trying to delete queues Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 06/28] pc: add 2.4 machine types Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 07/28] spapr: add machine type specific instance init function Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 08/28] ppc: spapr: add 2.4 machine type Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 09/28] monitor: replace the magic number 255 with MAX_QUEUE_NUM Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 10/28] monitor: check return value of qemu_find_net_clients_except() Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 11/28] virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 12/28] virtio: introduce vector to virtqueues mapping Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 13/28] virtio-pci: speedup MSI-X masking and unmasking Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 14/28] pci: remove hard-coded bar size in msix_init_exclusive_bar() Michael S. Tsirkin
2015-05-11 12:47 ` [Qemu-devel] [PULL 15/28] virtio: coding style tweak Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 16/28] docs: update documentation for memory hot unplug Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 17/28] acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus Michael S. Tsirkin
2015-05-11 12:48 ` Michael S. Tsirkin [this message]
2015-05-11 12:48 ` [Qemu-devel] [PULL 19/28] acpi, mem-hotplug: add unplug cb for memory device Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 20/28] acpi: extend aml_field() to support UpdateRule Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 21/28] acpi: fix "Memory device control fields" register Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 22/28] acpi: add hardware implementation for memory hot unplug Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 23/28] qmp-event: add event notification for memory hot unplug error Michael S. Tsirkin
2015-05-11 15:03 ` Eric Blake
2015-05-11 15:17 ` Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 24/28] acpi: add a missing backslash to the \_SB scope Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 25/28] pci: Merge pci_nic_init() into pci_nic_init_nofail() Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 26/28] virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 27/28] virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi Michael S. Tsirkin
2015-05-11 12:48 ` [Qemu-devel] [PULL 28/28] acpi: update expected files for memory unplug Michael S. Tsirkin
2015-05-12 7:49 ` [Qemu-devel] [PULL 00/28] pc, virtio enhancements Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431329108-2605-19-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=imammedo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=tangchen@cn.fujitsu.com \
--cc=zhugh.fnst@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).