From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 12/19] hw/intc/arm_gic: Restrict priority view
Date: Mon, 11 May 2015 14:40:31 +0100 [thread overview]
Message-ID: <1431351638-21705-13-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1431351638-21705-1-git-send-email-peter.maydell@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
GICs with Security Extensions restrict the non-secure view of the
interrupt priority and priority mask registers.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-11-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-15-git-send-email-greg.bellows@linaro.org
[PMM: minor code tweaks; fixed missing masking in gic_set_priority_mask
and gic_set_priority]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gic.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++----
hw/intc/arm_gic_kvm.c | 2 +-
hw/intc/gic_internal.h | 3 ++-
3 files changed, 61 insertions(+), 7 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index e3bbe9e..7c0ddc8 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -233,8 +233,16 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu)
return ret;
}
-void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val)
+void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val,
+ MemTxAttrs attrs)
{
+ if (s->security_extn && !attrs.secure) {
+ if (!GIC_TEST_GROUP(irq, (1 << cpu))) {
+ return; /* Ignore Non-secure access of Group0 IRQ */
+ }
+ val = 0x80 | (val >> 1); /* Non-secure view */
+ }
+
if (irq < GIC_INTERNAL) {
s->priority1[irq][cpu] = val;
} else {
@@ -242,6 +250,51 @@ void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val)
}
}
+static uint32_t gic_get_priority(GICState *s, int cpu, int irq,
+ MemTxAttrs attrs)
+{
+ uint32_t prio = GIC_GET_PRIORITY(irq, cpu);
+
+ if (s->security_extn && !attrs.secure) {
+ if (!GIC_TEST_GROUP(irq, (1 << cpu))) {
+ return 0; /* Non-secure access cannot read priority of Group0 IRQ */
+ }
+ prio = (prio << 1) & 0xff; /* Non-secure view */
+ }
+ return prio;
+}
+
+static void gic_set_priority_mask(GICState *s, int cpu, uint8_t pmask,
+ MemTxAttrs attrs)
+{
+ if (s->security_extn && !attrs.secure) {
+ if (s->priority_mask[cpu] & 0x80) {
+ /* Priority Mask in upper half */
+ pmask = 0x80 | (pmask >> 1);
+ } else {
+ /* Non-secure write ignored if priority mask is in lower half */
+ return;
+ }
+ }
+ s->priority_mask[cpu] = pmask;
+}
+
+static uint32_t gic_get_priority_mask(GICState *s, int cpu, MemTxAttrs attrs)
+{
+ uint32_t pmask = s->priority_mask[cpu];
+
+ if (s->security_extn && !attrs.secure) {
+ if (pmask & 0x80) {
+ /* Priority Mask in upper half, return Non-secure view */
+ pmask = (pmask << 1) & 0xff;
+ } else {
+ /* Priority Mask in lower half, RAZ */
+ pmask = 0;
+ }
+ }
+ return pmask;
+}
+
static uint32_t gic_get_cpu_control(GICState *s, int cpu, MemTxAttrs attrs)
{
uint32_t ret = s->cpu_ctlr[cpu];
@@ -451,7 +504,7 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
irq = (offset - 0x400) + GIC_BASE_IRQ;
if (irq >= s->num_irq)
goto bad_reg;
- res = GIC_GET_PRIORITY(irq, cpu);
+ res = gic_get_priority(s, cpu, irq, attrs);
} else if (offset < 0xc00) {
/* Interrupt CPU Target. */
if (s->num_cpu == 1 && s->revision != REV_11MPCORE) {
@@ -669,7 +722,7 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
irq = (offset - 0x400) + GIC_BASE_IRQ;
if (irq >= s->num_irq)
goto bad_reg;
- gic_set_priority(s, cpu, irq, value);
+ gic_set_priority(s, cpu, irq, value, attrs);
} else if (offset < 0xc00) {
/* Interrupt CPU Target. RAZ/WI on uniprocessor GICs, with the
* annoying exception of the 11MPCore's GIC.
@@ -820,7 +873,7 @@ static MemTxResult gic_cpu_read(GICState *s, int cpu, int offset,
*data = gic_get_cpu_control(s, cpu, attrs);
break;
case 0x04: /* Priority mask */
- *data = s->priority_mask[cpu];
+ *data = gic_get_priority_mask(s, cpu, attrs);
break;
case 0x08: /* Binary Point */
if (s->security_extn && !attrs.secure) {
@@ -870,7 +923,7 @@ static MemTxResult gic_cpu_write(GICState *s, int cpu, int offset,
gic_set_cpu_control(s, cpu, value, attrs);
break;
case 0x04: /* Priority mask */
- s->priority_mask[cpu] = (value & 0xff);
+ gic_set_priority_mask(s, cpu, value, attrs);
break;
case 0x08: /* Binary Point */
if (s->security_extn && !attrs.secure) {
diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c
index c5a2f81..54f18df 100644
--- a/hw/intc/arm_gic_kvm.c
+++ b/hw/intc/arm_gic_kvm.c
@@ -251,7 +251,7 @@ static void translate_priority(GICState *s, int irq, int cpu,
if (to_kernel) {
*field = GIC_GET_PRIORITY(irq, cpu) & 0xff;
} else {
- gic_set_priority(s, cpu, irq, *field & 0xff);
+ gic_set_priority(s, cpu, irq, *field & 0xff, MEMTXATTRS_UNSPECIFIED);
}
}
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index 81c764c..119fb81 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -82,7 +82,8 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu);
void gic_complete_irq(GICState *s, int cpu, int irq);
void gic_update(GICState *s);
void gic_init_irqs_and_distributor(GICState *s);
-void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val);
+void gic_set_priority(GICState *s, int cpu, int irq, uint8_t val,
+ MemTxAttrs attrs);
static inline bool gic_test_pending(GICState *s, int irq, int cm)
{
--
1.9.1
next prev parent reply other threads:[~2015-05-11 13:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 13:40 [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 01/19] armv7m_nvic: systick: Reload the RELOAD value and count down only if ENABLE bit is set Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 02/19] hw/sd: Don't pass BlockBackend to sd_reset() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 03/19] hw/intc/arm_gic: Create outbound FIQ lines Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 04/19] hw/intc/arm_gic: Add Security Extensions property Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 05/19] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 06/19] hw/intc/arm_gic: Add Interrupt Group Registers Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 07/19] hw/intc/arm_gic_kvm.c: Save and restore GICD_IGROUPRn state Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 08/19] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 09/19] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 10/19] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 11/19] hw/intc/arm_gic: Implement Non-secure view of RPR Peter Maydell
2015-05-11 13:40 ` Peter Maydell [this message]
2015-05-11 13:40 ` [Qemu-devel] [PULL 13/19] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 14/19] hw/intc/arm_gic: Change behavior of EOIR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 15/19] hw/intc/arm_gic: Change behavior of IAR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 16/19] hw/intc/arm_gic: Add grouping support to gic_update() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 17/19] hw/arm/virt.c: Wire FIQ between CPU <> GIC Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 18/19] hw/arm/vexpress.c: " Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 19/19] hw/arm/highbank.c: " Peter Maydell
2015-05-12 8:01 ` [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-12 8:10 ` Peter Crosthwaite
2015-05-12 8:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431351638-21705-13-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).