qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/19] hw/intc/arm_gic: Add Security Extensions property
Date: Mon, 11 May 2015 14:40:23 +0100	[thread overview]
Message-ID: <1431351638-21705-5-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1431351638-21705-1-git-send-email-peter.maydell@linaro.org>

From: Fabian Aggeler <aggelerf@ethz.ch>

Add a QOM property which allows the GIC Security Extensions to be
enabled. These are an optional part of the GICv1 and GICv2 architecture.
This commit just adds the property and some sanity checks that it
is only enabled on GIC revisions that support it.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-3-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-5-git-send-email-greg.bellows@linaro.org
[PMM: changed property name, added checks that it isn't set for
 older GIC revisions or if using the KVM VGIC; reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/arm_gic.c                | 5 ++++-
 hw/intc/arm_gic_common.c         | 9 +++++++++
 hw/intc/arm_gic_kvm.c            | 6 ++++++
 include/hw/intc/arm_gic_common.h | 1 +
 4 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index e9fb8b9..cdf7408 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -298,7 +298,10 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset)
         if (offset == 0)
             return s->enabled;
         if (offset == 4)
-            return ((s->num_irq / 32) - 1) | ((NUM_CPU(s) - 1) << 5);
+            /* Interrupt Controller Type Register */
+            return ((s->num_irq / 32) - 1)
+                    | ((NUM_CPU(s) - 1) << 5)
+                    | (s->security_extn << 10);
         if (offset < 0x08)
             return 0;
         if (offset >= 0x80) {
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index 18b01ba..5ed21f1 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -110,6 +110,13 @@ static void arm_gic_common_realize(DeviceState *dev, Error **errp)
                    num_irq);
         return;
     }
+
+    if (s->security_extn &&
+        (s->revision == REV_11MPCORE || s->revision == REV_NVIC)) {
+        error_setg(errp, "this GIC revision does not implement "
+                   "the security extensions");
+        return;
+    }
 }
 
 static void arm_gic_common_reset(DeviceState *dev)
@@ -149,6 +156,8 @@ static Property arm_gic_common_properties[] = {
      * (Internally, 0xffffffff also indicates "not a GIC but an NVIC".)
      */
     DEFINE_PROP_UINT32("revision", GICState, revision, 1),
+    /* True if the GIC should implement the security extensions */
+    DEFINE_PROP_BOOL("has-security-extensions", GICState, security_extn, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c
index 5aedae1..cb47b12 100644
--- a/hw/intc/arm_gic_kvm.c
+++ b/hw/intc/arm_gic_kvm.c
@@ -544,6 +544,12 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
         return;
     }
 
+    if (s->security_extn) {
+        error_setg(errp, "the in-kernel VGIC does not implement the "
+                   "security extensions");
+        return;
+    }
+
     i = s->num_irq - GIC_INTERNAL;
     /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
      * GPIO array layout is thus:
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index 01c6f24..7825134 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -105,6 +105,7 @@ typedef struct GICState {
     MemoryRegion cpuiomem[GIC_NCPU + 1]; /* CPU interfaces */
     uint32_t num_irq;
     uint32_t revision;
+    bool security_extn;
     int dev_fd; /* kvm device fd if backed by kvm vgic support */
 } GICState;
 
-- 
1.9.1

  parent reply	other threads:[~2015-05-11 13:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-11 13:40 [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 01/19] armv7m_nvic: systick: Reload the RELOAD value and count down only if ENABLE bit is set Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 02/19] hw/sd: Don't pass BlockBackend to sd_reset() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 03/19] hw/intc/arm_gic: Create outbound FIQ lines Peter Maydell
2015-05-11 13:40 ` Peter Maydell [this message]
2015-05-11 13:40 ` [Qemu-devel] [PULL 05/19] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 06/19] hw/intc/arm_gic: Add Interrupt Group Registers Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 07/19] hw/intc/arm_gic_kvm.c: Save and restore GICD_IGROUPRn state Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 08/19] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 09/19] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 10/19] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 11/19] hw/intc/arm_gic: Implement Non-secure view of RPR Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 12/19] hw/intc/arm_gic: Restrict priority view Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 13/19] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 14/19] hw/intc/arm_gic: Change behavior of EOIR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 15/19] hw/intc/arm_gic: Change behavior of IAR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 16/19] hw/intc/arm_gic: Add grouping support to gic_update() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 17/19] hw/arm/virt.c: Wire FIQ between CPU <> GIC Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 18/19] hw/arm/vexpress.c: " Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 19/19] hw/arm/highbank.c: " Peter Maydell
2015-05-12  8:01 ` [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-12  8:10   ` Peter Crosthwaite
2015-05-12  8:22     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431351638-21705-5-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).