From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 08/19] hw/intc/arm_gic: Make ICDDCR/GICD_CTLR banked
Date: Mon, 11 May 2015 14:40:27 +0100 [thread overview]
Message-ID: <1431351638-21705-9-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1431351638-21705-1-git-send-email-peter.maydell@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
ICDDCR/GICD_CTLR is banked if the GIC has the security extensions,
and the S (or only) copy has separate enable bits for Group0 and
Group1 enable if the GIC implements interrupt groups.
EnableGroup0 (Bit [1]) in GICv1 is architecturally IMPDEF. Since this
bit (Enable Non-secure) is present in the integrated GIC of the Cortex-A9
MPCore, we support this bit in our GICv1 implementation too.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1430502643-25909-7-git-send-email-peter.maydell@linaro.org
Message-id: 1429113742-8371-8-git-send-email-greg.bellows@linaro.org
[PMM: rewritten to store the state in a single s->ctlr uint32,
with the NS register handled as an alias of bit 1 in that value;
added vmstate version bump]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gic.c | 28 +++++++++++++++++++++++-----
hw/intc/arm_gic_common.c | 8 ++++----
hw/intc/armv7m_nvic.c | 2 +-
hw/intc/gic_internal.h | 2 ++
include/hw/intc/arm_gic_common.h | 5 ++++-
5 files changed, 34 insertions(+), 11 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index 1aa4520..4f13ff2 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -67,7 +67,8 @@ void gic_update(GICState *s)
for (cpu = 0; cpu < NUM_CPU(s); cpu++) {
cm = 1 << cpu;
s->current_pending[cpu] = 1023;
- if (!s->enabled || !s->cpu_enabled[cpu]) {
+ if (!(s->ctlr & (GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1))
+ || !s->cpu_enabled[cpu]) {
qemu_irq_lower(s->parent_irq[cpu]);
return;
}
@@ -303,8 +304,16 @@ static uint32_t gic_dist_readb(void *opaque, hwaddr offset, MemTxAttrs attrs)
cpu = gic_get_current_cpu(s);
cm = 1 << cpu;
if (offset < 0x100) {
- if (offset == 0)
- return s->enabled;
+ if (offset == 0) { /* GICD_CTLR */
+ if (s->security_extn && !attrs.secure) {
+ /* The NS bank of this register is just an alias of the
+ * EnableGrp1 bit in the S bank version.
+ */
+ return extract32(s->ctlr, 1, 1);
+ } else {
+ return s->ctlr;
+ }
+ }
if (offset == 4)
/* Interrupt Controller Type Register */
return ((s->num_irq / 32) - 1)
@@ -475,8 +484,17 @@ static void gic_dist_writeb(void *opaque, hwaddr offset,
cpu = gic_get_current_cpu(s);
if (offset < 0x100) {
if (offset == 0) {
- s->enabled = (value & 1);
- DPRINTF("Distribution %sabled\n", s->enabled ? "En" : "Dis");
+ if (s->security_extn && !attrs.secure) {
+ /* NS version is just an alias of the S version's bit 1 */
+ s->ctlr = deposit32(s->ctlr, 1, 1, value);
+ } else if (gic_has_groups(s)) {
+ s->ctlr = value & (GICD_CTLR_EN_GRP0 | GICD_CTLR_EN_GRP1);
+ } else {
+ s->ctlr = value & GICD_CTLR_EN_GRP0;
+ }
+ DPRINTF("Distributor: Group0 %sabled; Group 1 %sabled\n",
+ s->ctlr & GICD_CTLR_EN_GRP0 ? "En" : "Dis",
+ s->ctlr & GICD_CTLR_EN_GRP1 ? "En" : "Dis");
} else if (offset < 4) {
/* ignored. */
} else if (offset >= 0x80) {
diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index b5a85e5..bef76fc 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -59,12 +59,12 @@ static const VMStateDescription vmstate_gic_irq_state = {
static const VMStateDescription vmstate_gic = {
.name = "arm_gic",
- .version_id = 8,
- .minimum_version_id = 8,
+ .version_id = 9,
+ .minimum_version_id = 9,
.pre_save = gic_pre_save,
.post_load = gic_post_load,
.fields = (VMStateField[]) {
- VMSTATE_BOOL(enabled, GICState),
+ VMSTATE_UINT32(ctlr, GICState),
VMSTATE_BOOL_ARRAY(cpu_enabled, GICState, GIC_NCPU),
VMSTATE_STRUCT_ARRAY(irq_state, GICState, GIC_MAXIRQ, 1,
vmstate_gic_irq_state, gic_irq_state),
@@ -146,7 +146,7 @@ static void arm_gic_common_reset(DeviceState *dev)
s->irq_target[i] = 1;
}
}
- s->enabled = false;
+ s->ctlr = 0;
}
static Property arm_gic_common_properties[] = {
diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index ca19157..16f0dca2 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -477,7 +477,7 @@ static void armv7m_nvic_reset(DeviceState *dev)
s->gic.cpu_enabled[0] = true;
s->gic.priority_mask[0] = 0x100;
/* The NVIC as a whole is always enabled. */
- s->gic.enabled = true;
+ s->gic.ctlr = 1;
systick_reset(s);
}
diff --git a/hw/intc/gic_internal.h b/hw/intc/gic_internal.h
index e8cf773..3b4b3fb 100644
--- a/hw/intc/gic_internal.h
+++ b/hw/intc/gic_internal.h
@@ -54,6 +54,8 @@
#define GIC_SET_GROUP(irq, cm) (s->irq_state[irq].group |= (cm))
#define GIC_TEST_GROUP(irq, cm) ((s->irq_state[irq].group & (cm)) != 0)
+#define GICD_CTLR_EN_GRP0 (1U << 0)
+#define GICD_CTLR_EN_GRP1 (1U << 1)
/* The special cases for the revision property: */
#define REV_11MPCORE 0
diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h
index b78981e..d5d3877 100644
--- a/include/hw/intc/arm_gic_common.h
+++ b/include/hw/intc/arm_gic_common.h
@@ -52,7 +52,10 @@ typedef struct GICState {
qemu_irq parent_irq[GIC_NCPU];
qemu_irq parent_fiq[GIC_NCPU];
- bool enabled;
+ /* GICD_CTLR; for a GIC with the security extensions the NS banked version
+ * of this register is just an alias of bit 1 of the S banked version.
+ */
+ uint32_t ctlr;
bool cpu_enabled[GIC_NCPU];
gic_irq_state irq_state[GIC_MAXIRQ];
--
1.9.1
next prev parent reply other threads:[~2015-05-11 13:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 13:40 [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 01/19] armv7m_nvic: systick: Reload the RELOAD value and count down only if ENABLE bit is set Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 02/19] hw/sd: Don't pass BlockBackend to sd_reset() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 03/19] hw/intc/arm_gic: Create outbound FIQ lines Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 04/19] hw/intc/arm_gic: Add Security Extensions property Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 05/19] hw/intc/arm_gic: Switch to read/write callbacks with tx attributes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 06/19] hw/intc/arm_gic: Add Interrupt Group Registers Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 07/19] hw/intc/arm_gic_kvm.c: Save and restore GICD_IGROUPRn state Peter Maydell
2015-05-11 13:40 ` Peter Maydell [this message]
2015-05-11 13:40 ` [Qemu-devel] [PULL 09/19] hw/intc/arm_gic: Make ICCBPR/GICC_BPR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 10/19] hw/intc/arm_gic: Make ICCICR/GICC_CTLR banked Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 11/19] hw/intc/arm_gic: Implement Non-secure view of RPR Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 12/19] hw/intc/arm_gic: Restrict priority view Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 13/19] hw/intc/arm_gic: Handle grouping for GICC_HPPIR Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 14/19] hw/intc/arm_gic: Change behavior of EOIR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 15/19] hw/intc/arm_gic: Change behavior of IAR writes Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 16/19] hw/intc/arm_gic: Add grouping support to gic_update() Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 17/19] hw/arm/virt.c: Wire FIQ between CPU <> GIC Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 18/19] hw/arm/vexpress.c: " Peter Maydell
2015-05-11 13:40 ` [Qemu-devel] [PULL 19/19] hw/arm/highbank.c: " Peter Maydell
2015-05-12 8:01 ` [Qemu-devel] [PULL 00/19] target-arm queue Peter Maydell
2015-05-12 8:10 ` Peter Crosthwaite
2015-05-12 8:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431351638-21705-9-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).