From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 02/21] target-arm: cpu64: Add support for Cortex-A53
Date: Mon, 18 May 2015 20:15:02 +0100 [thread overview]
Message-ID: <1431976521-30352-3-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1431976521-30352-1-git-send-email-peter.maydell@linaro.org>
From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Add the ARM Cortex-A53 processor definition. Similar to A57, but with
different L1 I cache policy, phys addr size and different cache
geometries. The cache sizes is implementation configurable, but use
these values (from Xilinx Zynq MPSoC) as a default until cache size
configurability is added.
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: db439ff834cf0431bc192b05272a3b28fe2045d0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/cpu64.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/target-arm/cpu64.c b/target-arm/cpu64.c
index 13e042e..bf7dd68 100644
--- a/target-arm/cpu64.c
+++ b/target-arm/cpu64.c
@@ -143,6 +143,56 @@ static void aarch64_a57_initfn(Object *obj)
define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
}
+static void aarch64_a53_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,cortex-a53";
+ set_feature(&cpu->env, ARM_FEATURE_V8);
+ set_feature(&cpu->env, ARM_FEATURE_VFP4);
+ set_feature(&cpu->env, ARM_FEATURE_NEON);
+ set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER);
+ set_feature(&cpu->env, ARM_FEATURE_AARCH64);
+ set_feature(&cpu->env, ARM_FEATURE_CBAR_RO);
+ set_feature(&cpu->env, ARM_FEATURE_V8_AES);
+ set_feature(&cpu->env, ARM_FEATURE_V8_SHA1);
+ set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
+ set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
+ set_feature(&cpu->env, ARM_FEATURE_CRC);
+ cpu->midr = 0x410fd034;
+ cpu->reset_fpsid = 0x41034070;
+ cpu->mvfr0 = 0x10110222;
+ cpu->mvfr1 = 0x12111111;
+ cpu->mvfr2 = 0x00000043;
+ cpu->ctr = 0x84448004; /* L1Ip = VIPT */
+ cpu->reset_sctlr = 0x00c50838;
+ cpu->id_pfr0 = 0x00000131;
+ cpu->id_pfr1 = 0x00011011;
+ cpu->id_dfr0 = 0x03010066;
+ cpu->id_afr0 = 0x00000000;
+ cpu->id_mmfr0 = 0x10101105;
+ cpu->id_mmfr1 = 0x40000000;
+ cpu->id_mmfr2 = 0x01260000;
+ cpu->id_mmfr3 = 0x02102211;
+ cpu->id_isar0 = 0x02101110;
+ cpu->id_isar1 = 0x13112111;
+ cpu->id_isar2 = 0x21232042;
+ cpu->id_isar3 = 0x01112131;
+ cpu->id_isar4 = 0x00011142;
+ cpu->id_isar5 = 0x00011121;
+ cpu->id_aa64pfr0 = 0x00002222;
+ cpu->id_aa64dfr0 = 0x10305106;
+ cpu->id_aa64isar0 = 0x00011120;
+ cpu->id_aa64mmfr0 = 0x00001122; /* 40 bit physical addr */
+ cpu->dbgdidr = 0x3516d000;
+ cpu->clidr = 0x0a200023;
+ cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */
+ cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */
+ cpu->ccsidr[2] = 0x707fe07a; /* 1024KB L2 cache */
+ cpu->dcz_blocksize = 4; /* 64 bytes */
+ define_arm_cp_regs(cpu, cortex_a57_a53_cp_reginfo);
+}
+
#ifdef CONFIG_USER_ONLY
static void aarch64_any_initfn(Object *obj)
{
@@ -170,6 +220,7 @@ typedef struct ARMCPUInfo {
static const ARMCPUInfo aarch64_cpus[] = {
{ .name = "cortex-a57", .initfn = aarch64_a57_initfn },
+ { .name = "cortex-a53", .initfn = aarch64_a53_initfn },
#ifdef CONFIG_USER_ONLY
{ .name = "any", .initfn = aarch64_any_initfn },
#endif
--
1.9.1
next prev parent reply other threads:[~2015-05-18 19:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-18 19:15 [Qemu-devel] [PULL 00/21] target-arm queue Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 01/21] target-arm: cpu64: generalise name of A57 regs Peter Maydell
2015-05-18 19:15 ` Peter Maydell [this message]
2015-05-18 19:15 ` [Qemu-devel] [PULL 03/21] arm: Introduce Xilinx ZynqMP SoC Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 04/21] arm: xlnx-zynqmp: Add GIC Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 05/21] arm: xlnx-zynqmp: Connect CPU Timers to GIC Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 06/21] net: cadence_gem: Clean up variable names Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 07/21] net: cadence_gem: Split state struct and type into header Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 08/21] arm: xlnx-zynqmp: Add GEM support Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 09/21] char: cadence_uart: Clean up variable names Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 10/21] char: cadence_uart: Split state struct and type into header Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 11/21] arm: xlnx-zynqmp: Add UART support Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 12/21] arm: Add xlnx-ep108 machine Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 13/21] arm: xlnx-ep108: Add external RAM Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 14/21] arm: xlnx-ep108: Add bootloading Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 15/21] linux-user/arm: Correct TARGET_NR_timerfd to TARGET_NR_timerfd_create Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 16/21] target-arm: Add TTBR regime function and use Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 17/21] target-arm: Add EL3 and EL2 TCR checking Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 18/21] target-arm: Add WFx syndrome function Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 19/21] target-arm: Correct accessfn for CNTP_{CT}VAL_EL0 Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 20/21] target-arm: Correct accessfn for CNTV_TVAL_EL0 Peter Maydell
2015-05-18 19:15 ` [Qemu-devel] [PULL 21/21] target-arm: Remove unneeded '+' Peter Maydell
2015-05-19 7:57 ` [Qemu-devel] [PULL 00/21] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431976521-30352-3-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).