From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v3 27/29] memory: replace cpu_physical_memory_reset_dirty() with test-and-clear
Date: Tue, 26 May 2015 18:55:03 +0200 [thread overview]
Message-ID: <1432659305-54578-28-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1432659305-54578-1-git-send-email-pbonzini@redhat.com>
From: Stefan Hajnoczi <stefanha@redhat.com>
The cpu_physical_memory_reset_dirty() function is sometimes used
together with cpu_physical_memory_get_dirty(). This is not atomic since
two separate accesses to the dirty memory bitmap are made.
Turn cpu_physical_memory_reset_dirty() and
cpu_physical_memory_clear_dirty_range_type() into the atomic
cpu_physical_memory_test_and_clear_dirty().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1417519399-3166-6-git-send-email-stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
cputlb.c | 4 ++--
exec.c | 23 +++++++++++++++++------
include/exec/ram_addr.h | 33 ++++++++++-----------------------
memory.c | 11 ++++-------
4 files changed, 33 insertions(+), 38 deletions(-)
diff --git a/cputlb.c b/cputlb.c
index dd1203b..a506086 100644
--- a/cputlb.c
+++ b/cputlb.c
@@ -125,8 +125,8 @@ void tlb_flush_page(CPUState *cpu, target_ulong addr)
can be detected */
void tlb_protect_code(ram_addr_t ram_addr)
{
- cpu_physical_memory_reset_dirty(ram_addr, TARGET_PAGE_SIZE,
- DIRTY_MEMORY_CODE);
+ cpu_physical_memory_test_and_clear_dirty(ram_addr, TARGET_PAGE_SIZE,
+ DIRTY_MEMORY_CODE);
}
/* update the TLB so that writes in physical page 'phys_addr' are no longer
diff --git a/exec.c b/exec.c
index 4cd18ff..7552363 100644
--- a/exec.c
+++ b/exec.c
@@ -856,16 +856,27 @@ static void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t length)
}
/* Note: start and end must be within the same ram block. */
-void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t length,
- unsigned client)
+bool cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
+ ram_addr_t length,
+ unsigned client)
{
- if (length == 0)
- return;
- cpu_physical_memory_clear_dirty_range_type(start, length, client);
+ unsigned long end, page;
+ bool dirty;
+
+ if (length == 0) {
+ return false;
+ }
- if (tcg_enabled()) {
+ end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
+ page = start >> TARGET_PAGE_BITS;
+ dirty = bitmap_test_and_clear_atomic(ram_list.dirty_memory[client],
+ page, end - page);
+
+ if (dirty && tcg_enabled()) {
tlb_reset_dirty_range_all(start, length);
}
+
+ return dirty;
}
/* Called from RCU critical section */
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 2dab337..e93207d 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -194,30 +194,19 @@ static inline void cpu_physical_memory_set_dirty_lebitmap(unsigned long *bitmap,
}
#endif /* not _WIN32 */
-static inline void cpu_physical_memory_clear_dirty_range_type(ram_addr_t start,
- ram_addr_t length,
- unsigned client)
-{
- unsigned long end, page;
-
- assert(client < DIRTY_MEMORY_NUM);
- end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS;
- page = start >> TARGET_PAGE_BITS;
- bitmap_clear(ram_list.dirty_memory[client], page, end - page);
-}
+bool cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
+ ram_addr_t length,
+ unsigned client);
static inline void cpu_physical_memory_clear_dirty_range(ram_addr_t start,
ram_addr_t length)
{
- cpu_physical_memory_clear_dirty_range_type(start, length, DIRTY_MEMORY_MIGRATION);
- cpu_physical_memory_clear_dirty_range_type(start, length, DIRTY_MEMORY_VGA);
- cpu_physical_memory_clear_dirty_range_type(start, length, DIRTY_MEMORY_CODE);
+ cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_MIGRATION);
+ cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_VGA);
+ cpu_physical_memory_test_and_clear_dirty(start, length, DIRTY_MEMORY_CODE);
}
-void cpu_physical_memory_reset_dirty(ram_addr_t start, ram_addr_t length,
- unsigned client);
-
static inline
uint64_t cpu_physical_memory_sync_dirty_bitmap(unsigned long *dest,
ram_addr_t start,
@@ -245,16 +234,14 @@ uint64_t cpu_physical_memory_sync_dirty_bitmap(unsigned long *dest,
}
} else {
for (addr = 0; addr < length; addr += TARGET_PAGE_SIZE) {
- if (cpu_physical_memory_get_dirty(start + addr,
- TARGET_PAGE_SIZE,
- DIRTY_MEMORY_MIGRATION)) {
+ if (cpu_physical_memory_test_and_clear_dirty(
+ start + addr,
+ TARGET_PAGE_SIZE,
+ DIRTY_MEMORY_MIGRATION)) {
long k = (start + addr) >> TARGET_PAGE_BITS;
if (!test_and_set_bit(k, dest)) {
num_dirty++;
}
- cpu_physical_memory_reset_dirty(start + addr,
- TARGET_PAGE_SIZE,
- DIRTY_MEMORY_MIGRATION);
}
}
}
diff --git a/memory.c b/memory.c
index 418cac7..0c5d328 100644
--- a/memory.c
+++ b/memory.c
@@ -1468,13 +1468,9 @@ void memory_region_set_dirty(MemoryRegion *mr, hwaddr addr,
bool memory_region_test_and_clear_dirty(MemoryRegion *mr, hwaddr addr,
hwaddr size, unsigned client)
{
- bool ret;
assert(mr->terminates);
- ret = cpu_physical_memory_get_dirty(mr->ram_addr + addr, size, client);
- if (ret) {
- cpu_physical_memory_reset_dirty(mr->ram_addr + addr, size, client);
- }
- return ret;
+ return cpu_physical_memory_test_and_clear_dirty(mr->ram_addr + addr,
+ size, client);
}
@@ -1518,7 +1514,8 @@ void memory_region_reset_dirty(MemoryRegion *mr, hwaddr addr,
hwaddr size, unsigned client)
{
assert(mr->terminates);
- cpu_physical_memory_reset_dirty(mr->ram_addr + addr, size, client);
+ cpu_physical_memory_test_and_clear_dirty(mr->ram_addr + addr, size,
+ client);
}
int memory_region_get_fd(MemoryRegion *mr)
--
1.8.3.1
next prev parent reply other threads:[~2015-05-26 16:56 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-26 16:54 [Qemu-devel] [PATCH v3 00/29] Dirty bitmap atomic access and optimizations Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 01/29] memory: the only dirty memory flag for users is DIRTY_MEMORY_VGA Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 02/29] g364fb: remove pointless call to memory_region_set_coalescing Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 03/29] display: enable DIRTY_MEMORY_VGA tracking explicitly Paolo Bonzini
2015-05-27 7:47 ` Fam Zheng
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 04/29] display: add memory_region_sync_dirty_bitmap calls Paolo Bonzini
2015-05-27 7:49 ` Fam Zheng
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 05/29] memory: differentiate memory_region_is_logging and memory_region_get_dirty_log_mask Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 06/29] memory: prepare for multiple bits in the dirty log mask Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 07/29] framebuffer: check memory_region_is_logging Paolo Bonzini
2015-05-27 7:51 ` Fam Zheng
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 08/29] ui/console: remove dpy_gfx_update_dirty Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 09/29] memory: track DIRTY_MEMORY_CODE in mr->dirty_log_mask Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 10/29] kvm: accept non-mapped memory in kvm_dirty_pages_log_change Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 11/29] memory: include DIRTY_MEMORY_MIGRATION in the dirty log mask Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 12/29] kvm: remove special handling of " Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 13/29] ram_addr: tweaks to xen_modified_memory Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 14/29] exec: use memory_region_get_dirty_log_mask to optimize dirty tracking Paolo Bonzini
2015-05-27 7:54 ` Fam Zheng
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 15/29] exec: move functions to translate-all.h Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 16/29] translate-all: remove unnecessary argument to tb_invalidate_phys_range Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 17/29] cputlb: remove useless arguments to tlb_unprotect_code_phys, rename Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 18/29] translate-all: make less of tb_invalidate_phys_page_range depend on is_cpu_write_access Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 19/29] exec: pass client mask to cpu_physical_memory_set_dirty_range Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 20/29] exec: invert return value of cpu_physical_memory_get_clean, rename Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 21/29] exec: only check relevant bitmaps for cleanliness Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 22/29] memory: do not touch code dirty bitmap unless TCG is enabled Paolo Bonzini
2015-05-26 16:54 ` [Qemu-devel] [PATCH v3 23/29] bitmap: add atomic set functions Paolo Bonzini
2015-05-27 7:58 ` Fam Zheng
2015-05-27 9:41 ` Paolo Bonzini
2015-05-28 2:15 ` Fam Zheng
2015-05-26 16:55 ` [Qemu-devel] [PATCH v3 24/29] bitmap: add atomic test and clear Paolo Bonzini
2015-05-27 8:05 ` Fam Zheng
2015-05-26 16:55 ` [Qemu-devel] [PATCH v3 25/29] memory: use atomic ops for setting dirty memory bits Paolo Bonzini
2015-05-26 16:55 ` [Qemu-devel] [PATCH v3 26/29] migration: move dirty bitmap sync to ram_addr.h Paolo Bonzini
2015-05-27 8:21 ` Fam Zheng
2015-05-26 16:55 ` Paolo Bonzini [this message]
2015-05-26 22:40 ` [Qemu-devel] [PATCH v3 27/29] memory: replace cpu_physical_memory_reset_dirty() with test-and-clear Aurelien Jarno
2015-05-26 16:55 ` [Qemu-devel] [PATCH v3 28/29] memory: make cpu_physical_memory_sync_dirty_bitmap() fully atomic Paolo Bonzini
2015-05-26 16:55 ` [Qemu-devel] [PATCH v3 29/29] memory: use mr->ram_addr in "is this RAM?" assertions Paolo Bonzini
2015-05-26 22:43 ` [Qemu-devel] [PATCH v3 00/29] Dirty bitmap atomic access and optimizations Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432659305-54578-28-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).