From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>,
"Leon Alrae" <leon.alrae@imgtec.com>,
"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v2 00/17] net/dp8393x and dma/rc4030 improvements
Date: Wed, 27 May 2015 14:19:43 +0200 [thread overview]
Message-ID: <1432729200-5322-1-git-send-email-hpoussin@reactos.org> (raw)
Hi,
This patchset improves dp8393x network card emulation to current QEMU standards,
mostly decouples it from MIPS rc4030 chipset emulation, adds PROM and load/save
functionalities, and fixes some bugs seen with NetBSD.
It also converts rc4030 to QOM, and does some cleanup.
Patchset has been tested on MIPS Jazz emulation and on (yet unpublished)
m68k Quadra 800 emulation.
Changes v1->v2:
- added patches 1, 5-7, 14-16
- fixed memory region life cycle in rc4030 (patch 2)
- removed a loop around address_space_rw (patch 2)
- added RFC patch 17, which highlights a bug somewhere
Hervé Poussineau (17):
mips jazz: compile only in 64 bit little endian
dma/rc4030: create custom DMA address space
dma/rc4030: use AddressSpace and address_space_rw in users
dma/rc4030: do not use old_mmio accesses
dma/rc4030: document register at offset 0x210
dma/rc4030: use trace events instead of custom logging
dma/rc4030: convert to QOM
net/dp8393x: always calculate proper checksums
net/dp8393x: do not use old_mmio accesses
net/dp8393x: use dp8393x_ prefix for all functions
net/dp8393x: QOM'ify
net/dp8393x: add PROM to store MAC address
net/dp8393x: add load/save support
net/dp8393x: correctly reset in_use field
net/dp8393x: fix hardware reset
net/dp8393x: repair can_receive() method
[RFC] dma/rc4030: do multiple calls to address_space_rw when doing DMA
transfers
default-configs/mips-softmmu.mak | 5 -
default-configs/mips64-softmmu.mak | 5 -
default-configs/mips64el-softmmu.mak | 1 +
default-configs/mipsel-softmmu.mak | 5 -
hw/dma/rc4030.c | 472 ++++++++++++++++++-----------------
hw/mips/Makefile.objs | 3 +-
hw/mips/mips_jazz.c | 53 ++--
hw/net/dp8393x.c | 377 ++++++++++++++--------------
include/hw/mips/mips.h | 11 +-
tests/endianness-test.c | 4 -
trace-events | 6 +
11 files changed, 481 insertions(+), 461 deletions(-)
--
2.1.4
next reply other threads:[~2015-05-27 12:23 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 12:19 Hervé Poussineau [this message]
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 01/17] mips jazz: compile only in 64 bit little endian Hervé Poussineau
2015-06-02 11:02 ` Aurelien Jarno
2015-06-02 18:04 ` Hervé Poussineau
2015-06-02 19:08 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 02/17] dma/rc4030: create custom DMA address space Hervé Poussineau
2015-06-02 11:02 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 03/17] dma/rc4030: use AddressSpace and address_space_rw in users Hervé Poussineau
2015-06-02 11:02 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 04/17] dma/rc4030: do not use old_mmio accesses Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 05/17] dma/rc4030: document register at offset 0x210 Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 06/17] dma/rc4030: use trace events instead of custom logging Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 07/17] dma/rc4030: convert to QOM Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 08/17] net/dp8393x: always calculate proper checksums Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 09/17] net/dp8393x: do not use old_mmio accesses Hervé Poussineau
2015-06-02 11:03 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 10/17] net/dp8393x: use dp8393x_ prefix for all functions Hervé Poussineau
2015-06-02 11:04 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 11/17] net/dp8393x: QOM'ify Hervé Poussineau
2015-06-02 11:04 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 12/17] net/dp8393x: add PROM to store MAC address Hervé Poussineau
2015-06-02 11:04 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 13/17] net/dp8393x: add load/save support Hervé Poussineau
2015-06-02 11:04 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 14/17] net/dp8393x: correctly reset in_use field Hervé Poussineau
2015-06-02 11:04 ` Aurelien Jarno
2015-06-02 18:05 ` Hervé Poussineau
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 15/17] net/dp8393x: fix hardware reset Hervé Poussineau
2015-06-02 11:05 ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 16/17] net/dp8393x: repair can_receive() method Hervé Poussineau
2015-06-02 11:05 ` Aurelien Jarno
2015-06-03 20:33 ` Hervé Poussineau
2015-05-27 12:20 ` [Qemu-devel] [PATCH v2 17/17] [RFC] dma/rc4030: do multiple calls to address_space_rw when doing DMA transfers Hervé Poussineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432729200-5322-1-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=aurelien@aurel32.net \
--cc=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).