qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Hervé Poussineau" <hpoussin@reactos.org>,
	"Leon Alrae" <leon.alrae@imgtec.com>,
	"Aurelien Jarno" <aurelien@aurel32.net>
Subject: [Qemu-devel] [PATCH v2 01/17] mips jazz: compile only in 64 bit little endian
Date: Wed, 27 May 2015 14:19:44 +0200	[thread overview]
Message-ID: <1432729200-5322-2-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1432729200-5322-1-git-send-email-hpoussin@reactos.org>

Remove now useless device models from other MIPS configurations

We're now compiling 18 files less than before.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
 default-configs/mips-softmmu.mak     | 5 -----
 default-configs/mips64-softmmu.mak   | 5 -----
 default-configs/mips64el-softmmu.mak | 1 +
 default-configs/mipsel-softmmu.mak   | 5 -----
 hw/mips/Makefile.objs                | 3 ++-
 hw/mips/mips_jazz.c                  | 5 -----
 tests/endianness-test.c              | 4 ----
 7 files changed, 3 insertions(+), 25 deletions(-)

diff --git a/default-configs/mips-softmmu.mak b/default-configs/mips-softmmu.mak
index cce2c81..f62a21a 100644
--- a/default-configs/mips-softmmu.mak
+++ b/default-configs/mips-softmmu.mak
@@ -21,14 +21,9 @@ CONFIG_PIIX4=y
 CONFIG_IDE_ISA=y
 CONFIG_IDE_PIIX=y
 CONFIG_NE2000_ISA=y
-CONFIG_RC4030=y
-CONFIG_DP8393X=y
-CONFIG_DS1225Y=y
 CONFIG_MIPSNET=y
 CONFIG_PFLASH_CFI01=y
-CONFIG_G364FB=y
 CONFIG_I8259=y
-CONFIG_JAZZ_LED=y
 CONFIG_MC146818RTC=y
 CONFIG_ISA_TESTDEV=y
 CONFIG_EMPTY_SLOT=y
diff --git a/default-configs/mips64-softmmu.mak b/default-configs/mips64-softmmu.mak
index 7a88a08..accedca 100644
--- a/default-configs/mips64-softmmu.mak
+++ b/default-configs/mips64-softmmu.mak
@@ -21,14 +21,9 @@ CONFIG_PIIX4=y
 CONFIG_IDE_ISA=y
 CONFIG_IDE_PIIX=y
 CONFIG_NE2000_ISA=y
-CONFIG_RC4030=y
-CONFIG_DP8393X=y
-CONFIG_DS1225Y=y
 CONFIG_MIPSNET=y
 CONFIG_PFLASH_CFI01=y
-CONFIG_G364FB=y
 CONFIG_I8259=y
-CONFIG_JAZZ_LED=y
 CONFIG_MC146818RTC=y
 CONFIG_ISA_TESTDEV=y
 CONFIG_EMPTY_SLOT=y
diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
index 095de43..24ff6b9 100644
--- a/default-configs/mips64el-softmmu.mak
+++ b/default-configs/mips64el-softmmu.mak
@@ -28,6 +28,7 @@ CONFIG_DS1225Y=y
 CONFIG_MIPSNET=y
 CONFIG_PFLASH_CFI01=y
 CONFIG_FULONG=y
+CONFIG_JAZZ=y
 CONFIG_G364FB=y
 CONFIG_I8259=y
 CONFIG_JAZZ_LED=y
diff --git a/default-configs/mipsel-softmmu.mak b/default-configs/mipsel-softmmu.mak
index 0e25108..9fbee82 100644
--- a/default-configs/mipsel-softmmu.mak
+++ b/default-configs/mipsel-softmmu.mak
@@ -21,14 +21,9 @@ CONFIG_PIIX4=y
 CONFIG_IDE_ISA=y
 CONFIG_IDE_PIIX=y
 CONFIG_NE2000_ISA=y
-CONFIG_RC4030=y
-CONFIG_DP8393X=y
-CONFIG_DS1225Y=y
 CONFIG_MIPSNET=y
 CONFIG_PFLASH_CFI01=y
-CONFIG_G364FB=y
 CONFIG_I8259=y
-CONFIG_JAZZ_LED=y
 CONFIG_MC146818RTC=y
 CONFIG_ISA_TESTDEV=y
 CONFIG_EMPTY_SLOT=y
diff --git a/hw/mips/Makefile.objs b/hw/mips/Makefile.objs
index 0a652f8..9633f3a 100644
--- a/hw/mips/Makefile.objs
+++ b/hw/mips/Makefile.objs
@@ -1,4 +1,5 @@
-obj-y += mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
+obj-y += mips_r4k.o mips_malta.o mips_mipssim.o
 obj-y += addr.o cputimer.o mips_int.o
+obj-$(CONFIG_JAZZ) += mips_jazz.o
 obj-$(CONFIG_FULONG) += mips_fulong2e.o
 obj-y += gt64xxx_pci.o
diff --git a/hw/mips/mips_jazz.c b/hw/mips/mips_jazz.c
index 2c153e0..f16070e 100644
--- a/hw/mips/mips_jazz.c
+++ b/hw/mips/mips_jazz.c
@@ -157,12 +157,7 @@ static void mips_jazz_init(MachineState *machine,
 
     /* init CPUs */
     if (cpu_model == NULL) {
-#ifdef TARGET_MIPS64
         cpu_model = "R4000";
-#else
-        /* FIXME: All wrong, this maybe should be R3000 for the older JAZZs. */
-        cpu_model = "24Kf";
-#endif
     }
     cpu = cpu_mips_init(cpu_model);
     if (cpu == NULL) {
diff --git a/tests/endianness-test.c b/tests/endianness-test.c
index 92e17d2..9506da0 100644
--- a/tests/endianness-test.c
+++ b/tests/endianness-test.c
@@ -31,12 +31,8 @@ struct TestCase {
 
 static const TestCase test_cases[] = {
     { "i386", "pc", -1 },
-    { "mips", "magnum", 0x90000000, .bswap = true },
-    { "mips", "pica61", 0x90000000, .bswap = true },
     { "mips", "mips", 0x14000000, .bswap = true },
     { "mips", "malta", 0x10000000, .bswap = true },
-    { "mips64", "magnum", 0x90000000, .bswap = true },
-    { "mips64", "pica61", 0x90000000, .bswap = true },
     { "mips64", "mips", 0x14000000, .bswap = true },
     { "mips64", "malta", 0x10000000, .bswap = true },
     { "mips64el", "fulong2e", 0x1fd00000 },
-- 
2.1.4

  reply	other threads:[~2015-05-27 12:23 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-27 12:19 [Qemu-devel] [PATCH v2 00/17] net/dp8393x and dma/rc4030 improvements Hervé Poussineau
2015-05-27 12:19 ` Hervé Poussineau [this message]
2015-06-02 11:02   ` [Qemu-devel] [PATCH v2 01/17] mips jazz: compile only in 64 bit little endian Aurelien Jarno
2015-06-02 18:04     ` Hervé Poussineau
2015-06-02 19:08       ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 02/17] dma/rc4030: create custom DMA address space Hervé Poussineau
2015-06-02 11:02   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 03/17] dma/rc4030: use AddressSpace and address_space_rw in users Hervé Poussineau
2015-06-02 11:02   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 04/17] dma/rc4030: do not use old_mmio accesses Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 05/17] dma/rc4030: document register at offset 0x210 Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 06/17] dma/rc4030: use trace events instead of custom logging Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 07/17] dma/rc4030: convert to QOM Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 08/17] net/dp8393x: always calculate proper checksums Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 09/17] net/dp8393x: do not use old_mmio accesses Hervé Poussineau
2015-06-02 11:03   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 10/17] net/dp8393x: use dp8393x_ prefix for all functions Hervé Poussineau
2015-06-02 11:04   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 11/17] net/dp8393x: QOM'ify Hervé Poussineau
2015-06-02 11:04   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 12/17] net/dp8393x: add PROM to store MAC address Hervé Poussineau
2015-06-02 11:04   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 13/17] net/dp8393x: add load/save support Hervé Poussineau
2015-06-02 11:04   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 14/17] net/dp8393x: correctly reset in_use field Hervé Poussineau
2015-06-02 11:04   ` Aurelien Jarno
2015-06-02 18:05     ` Hervé Poussineau
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 15/17] net/dp8393x: fix hardware reset Hervé Poussineau
2015-06-02 11:05   ` Aurelien Jarno
2015-05-27 12:19 ` [Qemu-devel] [PATCH v2 16/17] net/dp8393x: repair can_receive() method Hervé Poussineau
2015-06-02 11:05   ` Aurelien Jarno
2015-06-03 20:33     ` Hervé Poussineau
2015-05-27 12:20 ` [Qemu-devel] [PATCH v2 17/17] [RFC] dma/rc4030: do multiple calls to address_space_rw when doing DMA transfers Hervé Poussineau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432729200-5322-2-git-send-email-hpoussin@reactos.org \
    --to=hpoussin@reactos.org \
    --cc=aurelien@aurel32.net \
    --cc=leon.alrae@imgtec.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).