Re: [Qemu-devel] [SeaBIOS] [PATCH 2/3] target-i386: reserve RCRB mmio space in ACPI DSDT table

[Gerd Hoffmann <kraxel@redhat.com>]

On Sa, 2015-05-30 at 07:57 -0300, Paulo Alcantara wrote:
> Hi Gerd,
> 
> On Thu, 28 May 2015 09:13:35 +0200
> Gerd Hoffmann <kraxel@redhat.com> wrote:
> 
> > > +Scope(\_SB) {
> > > +    OperationRegion (RCRB, SystemMemory, 0xfed1c000, 0x4000)
> > 
> > Where does this address come from?
> 
> This address is reserved in an ACPI DSDT table for Intel Haswell in
> Coreboot project, Vlv2DeviceRefCodePkg package in EDK II as well as my
> Haswell laptop on which I can see it through `dmesg` :-)

So it seems to be kind of standard.
Same address on my laptop btw.

> > Is this a standard location suggested by intel specs?
> 
> I haven't found any Intel spec or any other document that suggests such
> address, but from "9.4 Memory Map" section in ICH9 spec, it seems safe
> to use that MMIO region for the 16KiB of chipset configuration
> registers.
> 
> > Or is the firmware free to choose it?
> 
> Given that, I would say so.

There are a few more cases where addresses programmed by the firmware
and addresses in the acpi tables must match: acpi registers, pci
mmconfig space for example.  They are handles this way:

  (1) firmware programs the hardware registers as it pleases.
  (2) when the firmware fetches the acpi tables from qemu (via fw_cfg)
      qemu will update the tables according to the hardware programming.

So the question is whenever we better do that here too, or whenever it
is fine to simply hardcore this to 0xfed1c000 everywhere ...

I tend to think hardcoding is fine in that case.  coreboot, edk2 &
seabios all place it at the same location, and it is highly unlikely we
ever want move this to another place some day for some reason.

cheers,
  Gerd