From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: amit.shah@redhat.com
Subject: [Qemu-devel] [PULL 04/21] migration: reduce include files
Date: Wed, 3 Jun 2015 14:05:40 +0200 [thread overview]
Message-ID: <1433333157-9939-5-git-send-email-quintela@redhat.com> (raw)
In-Reply-To: <1433333157-9939-1-git-send-email-quintela@redhat.com>
To make changes easier, with the copy, I maintained almost all include
files. Now I remove the unnecessary ones on this patch. This compiles
on linux x64 with all architectures configured, and cross-compiles for
windows 32 and 64 bits.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
arch_init.c | 23 -----------------------
migration/ram.c | 18 ++----------------
2 files changed, 2 insertions(+), 39 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 1f34ad7..7c0d73e 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -22,38 +22,15 @@
* THE SOFTWARE.
*/
#include <stdint.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <zlib.h>
-#ifndef _WIN32
-#include <sys/types.h>
-#include <sys/mman.h>
-#endif
-#include "config.h"
-#include "monitor/monitor.h"
#include "sysemu/sysemu.h"
-#include "qemu/bitops.h"
-#include "qemu/bitmap.h"
#include "sysemu/arch_init.h"
-#include "audio/audio.h"
-#include "hw/i386/pc.h"
#include "hw/pci/pci.h"
#include "hw/audio/audio.h"
-#include "sysemu/kvm.h"
-#include "migration/migration.h"
#include "hw/i386/smbios.h"
-#include "exec/address-spaces.h"
-#include "hw/audio/pcspk.h"
-#include "migration/page_cache.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qmp-commands.h"
-#include "trace.h"
-#include "exec/cpu-all.h"
-#include "exec/ram_addr.h"
#include "hw/acpi/acpi.h"
-#include "qemu/host-utils.h"
-#include "qemu/rcu_queue.h"
#ifdef TARGET_SPARC
int graphic_width = 1024;
diff --git a/migration/ram.c b/migration/ram.c
index 61150a5..14b81fc 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -26,31 +26,17 @@
* THE SOFTWARE.
*/
#include <stdint.h>
-#include <stdarg.h>
-#include <stdlib.h>
#include <zlib.h>
-#ifndef _WIN32
-#include <sys/types.h>
-#include <sys/mman.h>
-#endif
-#include "config.h"
-#include "monitor/monitor.h"
-#include "sysemu/sysemu.h"
#include "qemu/bitops.h"
#include "qemu/bitmap.h"
-#include "hw/i386/pc.h"
-#include "hw/pci/pci.h"
-#include "hw/audio/audio.h"
+#include "qemu/timer.h"
+#include "qemu/main-loop.h"
#include "migration/migration.h"
#include "exec/address-spaces.h"
#include "migration/page_cache.h"
-#include "qemu/config-file.h"
#include "qemu/error-report.h"
-#include "qmp-commands.h"
#include "trace.h"
-#include "exec/cpu-all.h"
#include "exec/ram_addr.h"
-#include "qemu/host-utils.h"
#include "qemu/rcu_queue.h"
#ifdef DEBUG_MIGRATION_RAM
--
2.4.1
next prev parent reply other threads:[~2015-06-03 12:06 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 12:05 [Qemu-devel] [PULL 00/21] Migration pull request Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 01/21] migration: move ram stuff to migration/ram Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 02/21] migration: move savevm.c inside migration/ Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 03/21] migration: Add myself to the copyright list of both files Juan Quintela
2015-06-03 12:05 ` Juan Quintela [this message]
2015-06-03 12:05 ` [Qemu-devel] [PULL 05/21] arch_init: Clean up the duplicate variable 'len' defining in ram_load() Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 06/21] rdma: Fix qemu crash when IPv6 address is used for migration Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 07/21] migration: Remove duplicated assignment of SETUP status Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 08/21] migration: create savevm_state Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 09/21] migration: Use normal VMStateDescriptions for Subsections Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 10/21] Add qemu_get_counted_string to read a string prefixed by a count byte Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 11/21] Split header writing out of qemu_savevm_state_begin Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 12/21] qemu_ram_foreach_block: pass up error value, and down the ramblock name Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 13/21] Create MigrationIncomingState Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 14/21] Move copy out of qemu_peek_buffer Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 15/21] Move loadvm_handlers into MigrationIncomingState Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 16/21] Merge section header writing Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 17/21] Disable section footers on older machine types Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 18/21] Add a protective section footer Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 19/21] Teach analyze-migration.py about section footers Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 20/21] Rename RDMA structures to make destination clear Juan Quintela
2015-06-03 12:05 ` [Qemu-devel] [PULL 21/21] Remove unneeded memset Juan Quintela
2015-06-04 11:48 ` [Qemu-devel] [PULL 00/21] Migration pull request Peter Maydell
2015-06-04 13:01 ` Juan Quintela
-- strict thread matches above, loose matches on Subject: below --
2015-06-12 5:03 [Qemu-devel] [PULL v2 00/21] migration " Juan Quintela
2015-06-12 5:03 ` [Qemu-devel] [PULL 04/21] migration: reduce include files Juan Quintela
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433333157-9939-5-git-send-email-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=amit.shah@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).