From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: lersek@redhat.com, kraxel@redhat.com, mst@redhat.com
Subject: [Qemu-devel] [PATCH v2 22/23] q35: implement TSEG
Date: Wed, 3 Jun 2015 19:08:47 +0200 [thread overview]
Message-ID: <1433351328-23326-23-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1433351328-23326-1-git-send-email-pbonzini@redhat.com>
From: Gerd Hoffmann <kraxel@redhat.com>
TSEG provides larger amounts of SMRAM than the 128 KB available with
legacy SMRAM and high SMRAM.
Route access to tseg into nowhere when enabled, for both cpus and
busmaster dma, and add tseg window to smram region, so cpus can access
it in smm mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/pci-host/q35.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++-
include/hw/pci-host/q35.h | 1 +
2 files changed, 72 insertions(+), 1 deletion(-)
diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
index 2f37c29..9fb1b20 100644
--- a/hw/pci-host/q35.c
+++ b/hw/pci-host/q35.c
@@ -198,6 +198,28 @@ static const TypeInfo q35_host_info = {
* MCH D0:F0
*/
+static uint64_t tseg_blackhole_read(void *ptr, hwaddr reg, unsigned size)
+{
+ return 0xffffffff;
+}
+
+static void tseg_blackhole_write(void *opaque, hwaddr addr, uint64_t val,
+ unsigned width)
+{
+ /* nothing */
+}
+
+static const MemoryRegionOps tseg_blackhole_ops = {
+ .read = tseg_blackhole_read,
+ .write = tseg_blackhole_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
/* PCIe MMCFG */
static void mch_update_pciexbar(MCHPCIState *mch)
{
@@ -267,6 +289,7 @@ static void mch_update_smram(MCHPCIState *mch)
{
PCIDevice *pd = PCI_DEVICE(mch);
bool h_smrame = (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_H_SMRAME);
+ uint32_t tseg_size;
/* implement SMRAM.D_LCK */
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & MCH_HOST_BRIDGE_SMRAM_D_LCK) {
@@ -296,6 +319,39 @@ static void mch_update_smram(MCHPCIState *mch)
memory_region_set_enabled(&mch->high_smram, false);
}
+ if (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_T_EN) {
+ switch (pd->config[MCH_HOST_BRIDGE_ESMRAMC] &
+ MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_MASK) {
+ case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_1MB:
+ tseg_size = 1024 * 1024;
+ break;
+ case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_2MB:
+ tseg_size = 1024 * 1024 * 2;
+ break;
+ case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_8MB:
+ tseg_size = 1024 * 1024 * 8;
+ break;
+ default:
+ tseg_size = 0;
+ break;
+ }
+ } else {
+ tseg_size = 0;
+ }
+ memory_region_del_subregion(mch->system_memory, &mch->tseg_blackhole);
+ memory_region_set_enabled(&mch->tseg_blackhole, tseg_size);
+ memory_region_set_size(&mch->tseg_blackhole, tseg_size);
+ memory_region_add_subregion_overlap(mch->system_memory,
+ mch->below_4g_mem_size - tseg_size,
+ &mch->tseg_blackhole, 1);
+
+ memory_region_set_enabled(&mch->tseg_window, tseg_size);
+ memory_region_set_size(&mch->tseg_window, tseg_size);
+ memory_region_set_address(&mch->tseg_window,
+ mch->below_4g_mem_size - tseg_size);
+ memory_region_set_alias_offset(&mch->tseg_window,
+ mch->below_4g_mem_size - tseg_size);
+
memory_region_transaction_commit();
}
@@ -443,9 +499,23 @@ static void mch_realize(PCIDevice *d, Error **errp)
mch->ram_memory, 0xa0000, 0x20000);
memory_region_set_enabled(&mch->high_smram, true);
memory_region_add_subregion(&mch->smram, 0xfeda0000, &mch->high_smram);
+
+ memory_region_init_io(&mch->tseg_blackhole, OBJECT(mch),
+ &tseg_blackhole_ops, NULL,
+ "tseg-blackhole", 0);
+ memory_region_set_enabled(&mch->tseg_blackhole, false);
+ memory_region_add_subregion_overlap(mch->system_memory,
+ mch->below_4g_mem_size,
+ &mch->tseg_blackhole, 1);
+
+ memory_region_init_alias(&mch->tseg_window, OBJECT(mch), "tseg-window",
+ mch->ram_memory, mch->below_4g_mem_size, 0);
+ memory_region_set_enabled(&mch->tseg_window, false);
+ memory_region_add_subregion(&mch->smram, mch->below_4g_mem_size,
+ &mch->tseg_window);
+
object_property_add_const_link(qdev_get_machine(), "smram",
OBJECT(&mch->smram), &error_abort);
-
init_pam(DEVICE(mch), mch->ram_memory, mch->system_memory,
mch->pci_address_space, &mch->pam_regions[0],
PAM_BIOS_BASE, PAM_BIOS_SIZE);
diff --git a/include/hw/pci-host/q35.h b/include/hw/pci-host/q35.h
index 113cbe8..dbe6dc0 100644
--- a/include/hw/pci-host/q35.h
+++ b/include/hw/pci-host/q35.h
@@ -54,6 +54,7 @@ typedef struct MCHPCIState {
PAMMemoryRegion pam_regions[13];
MemoryRegion smram_region, open_high_smram;
MemoryRegion smram, low_smram, high_smram;
+ MemoryRegion tseg_blackhole, tseg_window;
PcPciInfo pci_info;
ram_addr_t below_4g_mem_size;
ram_addr_t above_4g_mem_size;
--
2.4.1
next prev parent reply other threads:[~2015-06-03 17:09 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 17:08 [Qemu-devel] [PATCH v2 00/23] SMM improvements (chipset and TCG parts) Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 01/23] target-i386: introduce cpu_get_mem_attrs Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 02/23] target-i386: Use correct memory attributes for memory accesses Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 03/23] target-i386: Use correct memory attributes for ioport accesses Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 04/23] target-i386: mask NMIs on entry to SMM Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 05/23] target-i386: set G=1 in SMM big real mode selectors Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 06/23] target-i386: wake up processors that receive an SMI Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 07/23] pflash_cfi01: change big-endian property to BIT type Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 08/23] pflash_cfi01: change to new-style MMIO accessors Paolo Bonzini
2015-06-04 6:19 ` Peter Crosthwaite
2015-06-04 8:02 ` Paolo Bonzini
2015-06-04 12:51 ` Laszlo Ersek
2015-06-09 18:08 ` Richard Henderson
2015-06-09 18:47 ` Michael S. Tsirkin
2015-06-17 7:56 ` Paolo Bonzini
2015-06-17 8:22 ` Markus Armbruster
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 09/23] pflash_cfi01: add secure property Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 10/23] vl: allow full-blown QemuOpts syntax for -global Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 11/23] qom: add object_property_add_const_link Paolo Bonzini
2015-06-04 6:33 ` Peter Crosthwaite
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 12/23] vl: run "late" notifiers immediately Paolo Bonzini
2015-06-04 6:39 ` Peter Crosthwaite
2015-06-04 8:03 ` Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 13/23] target-i386: create a separate AddressSpace for each CPU Paolo Bonzini
2015-06-03 17:58 ` Peter Crosthwaite
2015-06-04 8:02 ` Paolo Bonzini
2015-06-04 12:48 ` Laszlo Ersek
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 14/23] hw/i386: add a separate region that tracks the SMRAME bit Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 15/23] target-i386: use memory API to implement SMRAM Paolo Bonzini
2015-06-04 7:19 ` Peter Crosthwaite
2015-06-04 8:05 ` Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 16/23] hw/i386: remove smram_update Paolo Bonzini
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 17/23] q35: implement high SMRAM Paolo Bonzini
2015-06-04 12:50 ` Michael S. Tsirkin
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 18/23] q35: fix ESMRAMC default Paolo Bonzini
2015-06-04 12:51 ` Michael S. Tsirkin
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 19/23] q35: add config space wmask for SMRAM and ESMRAMC Paolo Bonzini
2015-06-04 12:51 ` Michael S. Tsirkin
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 20/23] q35: implement SMRAM.D_LCK Paolo Bonzini
2015-06-04 12:51 ` Michael S. Tsirkin
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 21/23] q35: add test for SMRAM.D_LCK Paolo Bonzini
2015-06-04 12:52 ` Michael S. Tsirkin
2015-06-03 17:08 ` Paolo Bonzini [this message]
2015-06-04 12:53 ` [Qemu-devel] [PATCH v2 22/23] q35: implement TSEG Michael S. Tsirkin
2015-06-03 17:08 ` [Qemu-devel] [PATCH v2 23/23] ich9: implement SMI_LOCK Paolo Bonzini
2015-06-04 12:53 ` Michael S. Tsirkin
2015-06-03 17:41 ` [Qemu-devel] [PATCH v2 00/23] SMM improvements (chipset and TCG parts) Laszlo Ersek
2015-06-03 17:44 ` Paolo Bonzini
2015-06-04 12:54 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433351328-23326-23-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kraxel@redhat.com \
--cc=lersek@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).