From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
peter.maydell@linaro.org, qemu-devel@nongnu.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 13/40] spapr_pci: Rework device-tree rendering
Date: Wed, 3 Jun 2015 23:45:14 +0200 [thread overview]
Message-ID: <1433367941-119488-14-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1433367941-119488-1-git-send-email-agraf@suse.de>
From: Alexey Kardashevskiy <aik@ozlabs.ru>
This replaces object_child_foreach() and callback with existing
SPAPR_PCI_LIOBN() and spapr_tce_find_by_liobn() to make the code easier
to read.
This is a mechanical patch so no behaviour change is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
hw/ppc/spapr_pci.c | 30 +++++-------------------------
1 file changed, 5 insertions(+), 25 deletions(-)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 79b6d3d..52c5c73 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -1090,29 +1090,6 @@ PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, int index)
#define b_fff(x) b_x((x), 8, 3) /* function number */
#define b_rrrrrrrr(x) b_x((x), 0, 8) /* register number */
-typedef struct sPAPRTCEDT {
- void *fdt;
- int node_off;
-} sPAPRTCEDT;
-
-static int spapr_phb_children_dt(Object *child, void *opaque)
-{
- sPAPRTCEDT *p = opaque;
- sPAPRTCETable *tcet;
-
- tcet = (sPAPRTCETable *) object_dynamic_cast(child, TYPE_SPAPR_TCE_TABLE);
- if (!tcet || SPAPR_PCI_DMA_WINDOW_NUM(tcet->liobn)) {
- return 0;
- }
-
- spapr_dma_dt(p->fdt, p->node_off, "ibm,dma-window",
- tcet->liobn, tcet->bus_offset,
- tcet->nb_table << tcet->page_shift);
- /* Stop after the first window */
-
- return 1;
-}
-
int spapr_populate_pci_dt(sPAPRPHBState *phb,
uint32_t xics_phandle,
void *fdt)
@@ -1151,6 +1128,7 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
uint32_t interrupt_map_mask[] = {
cpu_to_be32(b_ddddd(-1)|b_fff(0)), 0x0, 0x0, cpu_to_be32(-1)};
uint32_t interrupt_map[PCI_SLOT_MAX * PCI_NUM_PINS][7];
+ sPAPRTCETable *tcet;
/* Start populating the FDT */
sprintf(nodename, "pci@%" PRIx64, phb->buid);
@@ -1203,8 +1181,10 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
_FDT(fdt_setprop(fdt, bus_off, "interrupt-map", &interrupt_map,
sizeof(interrupt_map)));
- object_child_foreach(OBJECT(phb), spapr_phb_children_dt,
- &((sPAPRTCEDT){ .fdt = fdt, .node_off = bus_off }));
+ tcet = spapr_tce_find_by_liobn(SPAPR_PCI_LIOBN(phb->index, 0));
+ spapr_dma_dt(fdt, bus_off, "ibm,dma-window",
+ tcet->liobn, tcet->bus_offset,
+ tcet->nb_table << tcet->page_shift);
return 0;
}
--
1.8.1.4
next prev parent reply other threads:[~2015-06-03 21:45 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 21:45 [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 01/40] macio: Convert to realize() Alexander Graf
2015-06-03 21:53 ` Peter Maydell
2015-06-03 22:00 ` Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 02/40] dtc: Update dtc / libfdt submodule to version 1.4.0 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 03/40] configure: Check for libfdt " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 04/40] spapr_pci: Fix unsafe signed/unsigned comparisons Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 05/40] spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 06/40] spapr_iommu: Make H_PUT_TCE_INDIRECT endian-safe Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 07/40] spapr_pci: Introduce a liobn number generating macros Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 08/40] spapr_vio: " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 09/40] spapr_pci: Define default DMA window size as a macro Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 10/40] spapr_iommu: Add separate trace points for PCI DMA operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 11/40] spapr_pci: Make find_phb()/find_dev() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 12/40] spapr_iommu: Make spapr_tce_find_by_liobn() public Alexander Graf
2015-06-03 21:45 ` Alexander Graf [this message]
2015-06-03 21:45 ` [Qemu-devel] [PULL 14/40] spapr_iommu: Give unique QOM name to TCE table Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 15/40] hw/ppc/spapr_iommu: Fix the check for invalid upper bits in liobn Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 16/40] pseries: Add pseries-2.4 machine type Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 17/40] hw/ppc/spapr: Fix error message when firmware could not be loaded Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 18/40] hw/ppc/spapr: Use error_report() instead of hw_error() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 19/40] docs: add sPAPR hotplug/dynamic-reconfiguration documentation Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 20/40] spapr_drc: initial implementation of sPAPRDRConnector device Alexander Graf
2015-07-09 14:16 ` Paolo Bonzini
2015-06-03 21:45 ` [Qemu-devel] [PULL 21/40] spapr_rtas: add get/set-power-level RTAS interfaces Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 22/40] spapr_rtas: add set-indicator RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 23/40] spapr_rtas: add get-sensor-state " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 24/40] spapr: add rtas_st_buffer_direct() helper Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 25/40] spapr_rtas: add ibm, configure-connector RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 26/40] spapr_events: re-use EPOW event infrastructure for hotplug events Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 27/40] spapr_events: event-scan RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 28/40] spapr_drc: add spapr_drc_populate_dt() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 29/40] spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 30/40] spapr_pci: create DRConnectors for each PCI slot during PHB realize Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 31/40] pci: make pci_bar useable outside pci.c Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 32/40] spapr_pci: enable basic hotplug operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 33/40] spapr_pci: emit hotplug add/remove events during hotplug Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 34/40] machine: add default_ram_size to machine class Alexander Graf
2015-06-05 7:27 ` Laurent Desnogues
2015-06-03 21:45 ` [Qemu-devel] [PULL 35/40] spapr: override default ram size to 512MB Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 36/40] pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 37/40] Add David Gibson for sPAPR in MAINTAINERS file Alexander Graf
2015-11-18 20:46 ` Andreas Färber
2015-11-18 20:51 ` Eric Blake
2015-11-18 20:58 ` Andreas Färber
2015-06-03 21:45 ` [Qemu-devel] [PULL 38/40] tci: do not use CPUArchState in tcg-target.h Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 39/40] tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 40/40] softmmu: support up to 12 MMU modes Alexander Graf
2015-06-04 17:28 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-06-05 13:33 ` Peter Maydell
2015-06-05 14:35 ` Paolo Bonzini
2015-06-05 14:40 ` Peter Maydell
2015-06-05 15:02 ` Paolo Bonzini
2015-06-05 15:08 ` Peter Maydell
2015-06-05 15:20 ` Paolo Bonzini
2015-06-05 15:45 ` Peter Maydell
2015-06-05 15:55 ` [Qemu-devel] undefined behavior of signed left shifts (was Re: [PULL 00/40] ppc patch queue 2015-06-03) Paolo Bonzini
2015-06-05 17:21 ` Joseph Myers
2015-06-05 17:33 ` Peter Maydell
2015-07-21 11:42 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-07-21 23:32 ` Michael Roth
2015-06-05 15:24 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433367941-119488-14-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=aik@ozlabs.ru \
--cc=david@gibson.dropbear.id.au \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).