qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: Mike Day <ncmike@ncultra.org>,
	peter.maydell@linaro.org,
	David Gibson <david@gibson.dropbear.id.au>,
	qemu-devel@nongnu.org, Michael Roth <mdroth@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PULL 23/40] spapr_rtas: add get-sensor-state RTAS interface
Date: Wed,  3 Jun 2015 23:45:24 +0200	[thread overview]
Message-ID: <1433367941-119488-24-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1433367941-119488-1-git-send-email-agraf@suse.de>

From: Mike Day <ncmike@ncultra.org>

This interface allows a guest to read various platform/device sensors.
initially, we only implement support necessary to support hotplug:
reading of the dr-entity-sense sensor, which communicates the state of
a hotplugged resource/device to the guest (EMPTY/PRESENT/UNUSABLE).

See docs/specs/ppc-spapr-hotplug.txt for a complete description of
this interface.

Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 hw/ppc/spapr_rtas.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
index 6c741fa..f80beb2 100644
--- a/hw/ppc/spapr_rtas.c
+++ b/hw/ppc/spapr_rtas.c
@@ -377,6 +377,47 @@ out_unimplemented:
     rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
 }
 
+static void rtas_get_sensor_state(PowerPCCPU *cpu, sPAPREnvironment *spapr,
+                                  uint32_t token, uint32_t nargs,
+                                  target_ulong args, uint32_t nret,
+                                  target_ulong rets)
+{
+    uint32_t sensor_type;
+    uint32_t sensor_index;
+    sPAPRDRConnector *drc;
+    sPAPRDRConnectorClass *drck;
+    uint32_t entity_sense;
+
+    if (nargs != 2 || nret != 2) {
+        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+        return;
+    }
+
+    sensor_type = rtas_ld(args, 0);
+    sensor_index = rtas_ld(args, 1);
+
+    if (sensor_type != RTAS_SENSOR_TYPE_ENTITY_SENSE) {
+        /* currently only DR-related sensors are implemented */
+        DPRINTF("rtas_get_sensor_state: sensor/indicator not implemented: %d\n",
+                sensor_type);
+        rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED);
+        return;
+    }
+
+    drc = spapr_dr_connector_by_index(sensor_index);
+    if (!drc) {
+        DPRINTF("rtas_get_sensor_state: invalid sensor/DRC index: %xh\n",
+                sensor_index);
+        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+        return;
+    }
+    drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
+    entity_sense = drck->entity_sense(drc);
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    rtas_st(rets, 1, entity_sense);
+}
+
 static struct rtas_call {
     const char *name;
     spapr_rtas_fn fn;
@@ -508,6 +549,8 @@ static void core_rtas_register_types(void)
                         rtas_get_power_level);
     spapr_rtas_register(RTAS_SET_INDICATOR, "set-indicator",
                         rtas_set_indicator);
+    spapr_rtas_register(RTAS_GET_SENSOR_STATE, "get-sensor-state",
+                        rtas_get_sensor_state);
 }
 
 type_init(core_rtas_register_types)
-- 
1.8.1.4

  parent reply	other threads:[~2015-06-03 21:45 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-03 21:45 [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 01/40] macio: Convert to realize() Alexander Graf
2015-06-03 21:53   ` Peter Maydell
2015-06-03 22:00     ` Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 02/40] dtc: Update dtc / libfdt submodule to version 1.4.0 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 03/40] configure: Check for libfdt " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 04/40] spapr_pci: Fix unsafe signed/unsigned comparisons Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 05/40] spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 06/40] spapr_iommu: Make H_PUT_TCE_INDIRECT endian-safe Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 07/40] spapr_pci: Introduce a liobn number generating macros Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 08/40] spapr_vio: " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 09/40] spapr_pci: Define default DMA window size as a macro Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 10/40] spapr_iommu: Add separate trace points for PCI DMA operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 11/40] spapr_pci: Make find_phb()/find_dev() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 12/40] spapr_iommu: Make spapr_tce_find_by_liobn() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 13/40] spapr_pci: Rework device-tree rendering Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 14/40] spapr_iommu: Give unique QOM name to TCE table Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 15/40] hw/ppc/spapr_iommu: Fix the check for invalid upper bits in liobn Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 16/40] pseries: Add pseries-2.4 machine type Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 17/40] hw/ppc/spapr: Fix error message when firmware could not be loaded Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 18/40] hw/ppc/spapr: Use error_report() instead of hw_error() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 19/40] docs: add sPAPR hotplug/dynamic-reconfiguration documentation Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 20/40] spapr_drc: initial implementation of sPAPRDRConnector device Alexander Graf
2015-07-09 14:16   ` Paolo Bonzini
2015-06-03 21:45 ` [Qemu-devel] [PULL 21/40] spapr_rtas: add get/set-power-level RTAS interfaces Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 22/40] spapr_rtas: add set-indicator RTAS interface Alexander Graf
2015-06-03 21:45 ` Alexander Graf [this message]
2015-06-03 21:45 ` [Qemu-devel] [PULL 24/40] spapr: add rtas_st_buffer_direct() helper Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 25/40] spapr_rtas: add ibm, configure-connector RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 26/40] spapr_events: re-use EPOW event infrastructure for hotplug events Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 27/40] spapr_events: event-scan RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 28/40] spapr_drc: add spapr_drc_populate_dt() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 29/40] spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 30/40] spapr_pci: create DRConnectors for each PCI slot during PHB realize Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 31/40] pci: make pci_bar useable outside pci.c Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 32/40] spapr_pci: enable basic hotplug operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 33/40] spapr_pci: emit hotplug add/remove events during hotplug Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 34/40] machine: add default_ram_size to machine class Alexander Graf
2015-06-05  7:27   ` Laurent Desnogues
2015-06-03 21:45 ` [Qemu-devel] [PULL 35/40] spapr: override default ram size to 512MB Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 36/40] pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 37/40] Add David Gibson for sPAPR in MAINTAINERS file Alexander Graf
2015-11-18 20:46   ` Andreas Färber
2015-11-18 20:51     ` Eric Blake
2015-11-18 20:58       ` Andreas Färber
2015-06-03 21:45 ` [Qemu-devel] [PULL 38/40] tci: do not use CPUArchState in tcg-target.h Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 39/40] tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 40/40] softmmu: support up to 12 MMU modes Alexander Graf
2015-06-04 17:28 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-06-05 13:33 ` Peter Maydell
2015-06-05 14:35   ` Paolo Bonzini
2015-06-05 14:40     ` Peter Maydell
2015-06-05 15:02       ` Paolo Bonzini
2015-06-05 15:08         ` Peter Maydell
2015-06-05 15:20           ` Paolo Bonzini
2015-06-05 15:45             ` Peter Maydell
2015-06-05 15:55               ` [Qemu-devel] undefined behavior of signed left shifts (was Re: [PULL 00/40] ppc patch queue 2015-06-03) Paolo Bonzini
2015-06-05 17:21                 ` Joseph Myers
2015-06-05 17:33                 ` Peter Maydell
2015-07-21 11:42             ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-07-21 23:32               ` Michael Roth
2015-06-05 15:24   ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433367941-119488-24-git-send-email-agraf@suse.de \
    --to=agraf@suse.de \
    --cc=david@gibson.dropbear.id.au \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=ncmike@ncultra.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).