From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: peter.maydell@linaro.org, qemu-devel@nongnu.org,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 38/40] tci: do not use CPUArchState in tcg-target.h
Date: Wed, 3 Jun 2015 23:45:39 +0200 [thread overview]
Message-ID: <1433367941-119488-39-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1433367941-119488-1-git-send-email-agraf@suse.de>
From: Paolo Bonzini <pbonzini@redhat.com>
tcg-target.h does not use any QEMU-specific symbols, save for tci's usage
of CPUArchState. Pull that up to tcg/tcg.h.
This will make it possible to include tcg-target.h in cpu-defs.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
tcg/tcg.h | 4 +++-
tcg/tci/tcg-target.h | 3 +--
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/tcg/tcg.h b/tcg/tcg.h
index 8098f82..41e4869 100644
--- a/tcg/tcg.h
+++ b/tcg/tcg.h
@@ -927,7 +927,9 @@ static inline unsigned get_mmuidx(TCGMemOpIdx oi)
#define TB_EXIT_ICOUNT_EXPIRED 2
#define TB_EXIT_REQUESTED 3
-#if !defined(tcg_qemu_tb_exec)
+#ifdef HAVE_TCG_QEMU_TB_EXEC
+uintptr_t tcg_qemu_tb_exec(CPUArchState *env, uint8_t *tb_ptr);
+#else
# define tcg_qemu_tb_exec(env, tb_ptr) \
((uintptr_t (*)(void *, void *))tcg_ctx.code_gen_prologue)(env, tb_ptr)
#endif
diff --git a/tcg/tci/tcg-target.h b/tcg/tci/tcg-target.h
index bd1e974..662d45c 100644
--- a/tcg/tci/tcg-target.h
+++ b/tcg/tci/tcg-target.h
@@ -175,8 +175,7 @@ typedef enum {
void tci_disas(uint8_t opc);
-uintptr_t tcg_qemu_tb_exec(CPUArchState *env, uint8_t *tb_ptr);
-#define tcg_qemu_tb_exec tcg_qemu_tb_exec
+#define HAVE_TCG_QEMU_TB_EXEC
static inline void flush_icache_range(uintptr_t start, uintptr_t stop)
{
--
1.8.1.4
next prev parent reply other threads:[~2015-06-03 21:46 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 21:45 [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 01/40] macio: Convert to realize() Alexander Graf
2015-06-03 21:53 ` Peter Maydell
2015-06-03 22:00 ` Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 02/40] dtc: Update dtc / libfdt submodule to version 1.4.0 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 03/40] configure: Check for libfdt " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 04/40] spapr_pci: Fix unsafe signed/unsigned comparisons Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 05/40] spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 06/40] spapr_iommu: Make H_PUT_TCE_INDIRECT endian-safe Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 07/40] spapr_pci: Introduce a liobn number generating macros Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 08/40] spapr_vio: " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 09/40] spapr_pci: Define default DMA window size as a macro Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 10/40] spapr_iommu: Add separate trace points for PCI DMA operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 11/40] spapr_pci: Make find_phb()/find_dev() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 12/40] spapr_iommu: Make spapr_tce_find_by_liobn() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 13/40] spapr_pci: Rework device-tree rendering Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 14/40] spapr_iommu: Give unique QOM name to TCE table Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 15/40] hw/ppc/spapr_iommu: Fix the check for invalid upper bits in liobn Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 16/40] pseries: Add pseries-2.4 machine type Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 17/40] hw/ppc/spapr: Fix error message when firmware could not be loaded Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 18/40] hw/ppc/spapr: Use error_report() instead of hw_error() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 19/40] docs: add sPAPR hotplug/dynamic-reconfiguration documentation Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 20/40] spapr_drc: initial implementation of sPAPRDRConnector device Alexander Graf
2015-07-09 14:16 ` Paolo Bonzini
2015-06-03 21:45 ` [Qemu-devel] [PULL 21/40] spapr_rtas: add get/set-power-level RTAS interfaces Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 22/40] spapr_rtas: add set-indicator RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 23/40] spapr_rtas: add get-sensor-state " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 24/40] spapr: add rtas_st_buffer_direct() helper Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 25/40] spapr_rtas: add ibm, configure-connector RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 26/40] spapr_events: re-use EPOW event infrastructure for hotplug events Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 27/40] spapr_events: event-scan RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 28/40] spapr_drc: add spapr_drc_populate_dt() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 29/40] spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 30/40] spapr_pci: create DRConnectors for each PCI slot during PHB realize Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 31/40] pci: make pci_bar useable outside pci.c Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 32/40] spapr_pci: enable basic hotplug operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 33/40] spapr_pci: emit hotplug add/remove events during hotplug Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 34/40] machine: add default_ram_size to machine class Alexander Graf
2015-06-05 7:27 ` Laurent Desnogues
2015-06-03 21:45 ` [Qemu-devel] [PULL 35/40] spapr: override default ram size to 512MB Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 36/40] pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 37/40] Add David Gibson for sPAPR in MAINTAINERS file Alexander Graf
2015-11-18 20:46 ` Andreas Färber
2015-11-18 20:51 ` Eric Blake
2015-11-18 20:58 ` Andreas Färber
2015-06-03 21:45 ` Alexander Graf [this message]
2015-06-03 21:45 ` [Qemu-devel] [PULL 39/40] tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 40/40] softmmu: support up to 12 MMU modes Alexander Graf
2015-06-04 17:28 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-06-05 13:33 ` Peter Maydell
2015-06-05 14:35 ` Paolo Bonzini
2015-06-05 14:40 ` Peter Maydell
2015-06-05 15:02 ` Paolo Bonzini
2015-06-05 15:08 ` Peter Maydell
2015-06-05 15:20 ` Paolo Bonzini
2015-06-05 15:45 ` Peter Maydell
2015-06-05 15:55 ` [Qemu-devel] undefined behavior of signed left shifts (was Re: [PULL 00/40] ppc patch queue 2015-06-03) Paolo Bonzini
2015-06-05 17:21 ` Joseph Myers
2015-06-05 17:33 ` Peter Maydell
2015-07-21 11:42 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-07-21 23:32 ` Michael Roth
2015-06-05 15:24 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433367941-119488-39-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).