qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Graf <agraf@suse.de>
To: qemu-ppc@nongnu.org
Cc: peter.maydell@linaro.org, qemu-devel@nongnu.org,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 04/40] spapr_pci: Fix unsafe signed/unsigned comparisons
Date: Wed,  3 Jun 2015 23:45:05 +0200	[thread overview]
Message-ID: <1433367941-119488-5-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1433367941-119488-1-git-send-email-agraf@suse.de>

From: David Gibson <david@gibson.dropbear.id.au>

spapr_pci.c contains a number of expressions of the form (uval == -1) or
(uval != -1), where 'uval' is an unsigned value.

This mostly works in practice, because as long as the width of uval is
greater or equal than that of (int), the -1 will be promoted to the
unsigned type, which is the expected outcome.

However, at least for the cases where uval is uint32_t, this would break
on platforms where sizeof(int) > 4 (and a few such do exist), because then
the uint32_t value would be promoted to the larger int type, and never be
equal to -1.

This patch fixes these errors.  The fixes for the (uint32_t) cases are
necessary as described above.  I've made similar fixes to (uint64_t) and
(hwaddr) cases.  Those are strictly theoretical, since I don't know of any
platforms where sizeof(int) > 8, but hey, it's not that hard so we might
as well be strictly C standard compliant.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
 hw/ppc/spapr_pci.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 05f4fac..03f6d96 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -742,12 +742,12 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
     PCIBus *bus;
     uint64_t msi_window_size = 4096;
 
-    if (sphb->index != -1) {
+    if (sphb->index != (uint32_t)-1) {
         hwaddr windows_base;
 
-        if ((sphb->buid != -1) || (sphb->dma_liobn != -1)
-            || (sphb->mem_win_addr != -1)
-            || (sphb->io_win_addr != -1)) {
+        if ((sphb->buid != (uint64_t)-1) || (sphb->dma_liobn != (uint32_t)-1)
+            || (sphb->mem_win_addr != (hwaddr)-1)
+            || (sphb->io_win_addr != (hwaddr)-1)) {
             error_setg(errp, "Either \"index\" or other parameters must"
                        " be specified for PAPR PHB, not both");
             return;
@@ -768,22 +768,22 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
         sphb->io_win_addr = windows_base + SPAPR_PCI_IO_WIN_OFF;
     }
 
-    if (sphb->buid == -1) {
+    if (sphb->buid == (uint64_t)-1) {
         error_setg(errp, "BUID not specified for PHB");
         return;
     }
 
-    if (sphb->dma_liobn == -1) {
+    if (sphb->dma_liobn == (uint32_t)-1) {
         error_setg(errp, "LIOBN not specified for PHB");
         return;
     }
 
-    if (sphb->mem_win_addr == -1) {
+    if (sphb->mem_win_addr == (hwaddr)-1) {
         error_setg(errp, "Memory window address not specified for PHB");
         return;
     }
 
-    if (sphb->io_win_addr == -1) {
+    if (sphb->io_win_addr == (hwaddr)-1) {
         error_setg(errp, "IO window address not specified for PHB");
         return;
     }
-- 
1.8.1.4

  parent reply	other threads:[~2015-06-03 21:45 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-03 21:45 [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 01/40] macio: Convert to realize() Alexander Graf
2015-06-03 21:53   ` Peter Maydell
2015-06-03 22:00     ` Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 02/40] dtc: Update dtc / libfdt submodule to version 1.4.0 Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 03/40] configure: Check for libfdt " Alexander Graf
2015-06-03 21:45 ` Alexander Graf [this message]
2015-06-03 21:45 ` [Qemu-devel] [PULL 05/40] spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 06/40] spapr_iommu: Make H_PUT_TCE_INDIRECT endian-safe Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 07/40] spapr_pci: Introduce a liobn number generating macros Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 08/40] spapr_vio: " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 09/40] spapr_pci: Define default DMA window size as a macro Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 10/40] spapr_iommu: Add separate trace points for PCI DMA operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 11/40] spapr_pci: Make find_phb()/find_dev() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 12/40] spapr_iommu: Make spapr_tce_find_by_liobn() public Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 13/40] spapr_pci: Rework device-tree rendering Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 14/40] spapr_iommu: Give unique QOM name to TCE table Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 15/40] hw/ppc/spapr_iommu: Fix the check for invalid upper bits in liobn Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 16/40] pseries: Add pseries-2.4 machine type Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 17/40] hw/ppc/spapr: Fix error message when firmware could not be loaded Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 18/40] hw/ppc/spapr: Use error_report() instead of hw_error() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 19/40] docs: add sPAPR hotplug/dynamic-reconfiguration documentation Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 20/40] spapr_drc: initial implementation of sPAPRDRConnector device Alexander Graf
2015-07-09 14:16   ` Paolo Bonzini
2015-06-03 21:45 ` [Qemu-devel] [PULL 21/40] spapr_rtas: add get/set-power-level RTAS interfaces Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 22/40] spapr_rtas: add set-indicator RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 23/40] spapr_rtas: add get-sensor-state " Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 24/40] spapr: add rtas_st_buffer_direct() helper Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 25/40] spapr_rtas: add ibm, configure-connector RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 26/40] spapr_events: re-use EPOW event infrastructure for hotplug events Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 27/40] spapr_events: event-scan RTAS interface Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 28/40] spapr_drc: add spapr_drc_populate_dt() Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 29/40] spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 30/40] spapr_pci: create DRConnectors for each PCI slot during PHB realize Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 31/40] pci: make pci_bar useable outside pci.c Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 32/40] spapr_pci: enable basic hotplug operations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 33/40] spapr_pci: emit hotplug add/remove events during hotplug Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 34/40] machine: add default_ram_size to machine class Alexander Graf
2015-06-05  7:27   ` Laurent Desnogues
2015-06-03 21:45 ` [Qemu-devel] [PULL 35/40] spapr: override default ram size to 512MB Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 36/40] pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 37/40] Add David Gibson for sPAPR in MAINTAINERS file Alexander Graf
2015-11-18 20:46   ` Andreas Färber
2015-11-18 20:51     ` Eric Blake
2015-11-18 20:58       ` Andreas Färber
2015-06-03 21:45 ` [Qemu-devel] [PULL 38/40] tci: do not use CPUArchState in tcg-target.h Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 39/40] tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS Alexander Graf
2015-06-03 21:45 ` [Qemu-devel] [PULL 40/40] softmmu: support up to 12 MMU modes Alexander Graf
2015-06-04 17:28 ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-06-05 13:33 ` Peter Maydell
2015-06-05 14:35   ` Paolo Bonzini
2015-06-05 14:40     ` Peter Maydell
2015-06-05 15:02       ` Paolo Bonzini
2015-06-05 15:08         ` Peter Maydell
2015-06-05 15:20           ` Paolo Bonzini
2015-06-05 15:45             ` Peter Maydell
2015-06-05 15:55               ` [Qemu-devel] undefined behavior of signed left shifts (was Re: [PULL 00/40] ppc patch queue 2015-06-03) Paolo Bonzini
2015-06-05 17:21                 ` Joseph Myers
2015-06-05 17:33                 ` Peter Maydell
2015-07-21 11:42             ` [Qemu-devel] [PULL 00/40] ppc patch queue 2015-06-03 Peter Maydell
2015-07-21 23:32               ` Michael Roth
2015-06-05 15:24   ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433367941-119488-5-git-send-email-agraf@suse.de \
    --to=agraf@suse.de \
    --cc=david@gibson.dropbear.id.au \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).