qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH] update Linux headers from kvm/next
Date: Thu,  4 Jun 2015 16:40:42 +0200	[thread overview]
Message-ID: <1433428842-22445-1-git-send-email-pbonzini@redhat.com> (raw)

(Actually this is still kvm/queue, but I will push it to kvm/next
tomorrow as soon as automated testing is done).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 include/standard-headers/linux/virtio_ring.h |  2 +-
 linux-headers/asm-x86/kvm.h                  | 14 +++++++++++++-
 linux-headers/linux/kvm.h                    |  7 ++++++-
 3 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/include/standard-headers/linux/virtio_ring.h b/include/standard-headers/linux/virtio_ring.h
index cc647d6..6fe276f 100644
--- a/include/standard-headers/linux/virtio_ring.h
+++ b/include/standard-headers/linux/virtio_ring.h
@@ -155,7 +155,7 @@ static inline unsigned vring_size(unsigned int num, unsigned long align)
 }
 
 /* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
+/* Assuming a given event_idx value from the other side, if
  * we have just incremented index from old to new_idx,
  * should we trigger an event? */
 static inline int vring_need_event(uint16_t event_idx, uint16_t new_idx, uint16_t old)
diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index d7dcef5..a4ae82e 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -106,6 +106,8 @@ struct kvm_ioapic_state {
 #define KVM_IRQCHIP_IOAPIC       2
 #define KVM_NR_IRQCHIPS          3
 
+#define KVM_RUN_X86_SMM		 (1 << 0)
+
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
@@ -281,6 +283,7 @@ struct kvm_reinject_control {
 #define KVM_VCPUEVENT_VALID_NMI_PENDING	0x00000001
 #define KVM_VCPUEVENT_VALID_SIPI_VECTOR	0x00000002
 #define KVM_VCPUEVENT_VALID_SHADOW	0x00000004
+#define KVM_VCPUEVENT_VALID_SMM		0x00000008
 
 /* Interrupt shadow states */
 #define KVM_X86_SHADOW_INT_MOV_SS	0x01
@@ -309,7 +312,13 @@ struct kvm_vcpu_events {
 	} nmi;
 	__u32 sipi_vector;
 	__u32 flags;
-	__u32 reserved[10];
+	struct {
+		__u8 smm;
+		__u8 pending;
+		__u8 smm_inside_nmi;
+		__u8 latched_init;
+	} smi;
+	__u32 reserved[9];
 };
 
 /* for KVM_GET/SET_DEBUGREGS */
@@ -345,4 +354,7 @@ struct kvm_xcrs {
 struct kvm_sync_regs {
 };
 
+#define KVM_QUIRK_LINT0_REENABLED	(1 << 0)
+#define KVM_QUIRK_CD_NW_CLEARED		(1 << 1)
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index b96d978..fad9e5c 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -202,7 +202,7 @@ struct kvm_run {
 	__u32 exit_reason;
 	__u8 ready_for_interrupt_injection;
 	__u8 if_flag;
-	__u8 padding2[2];
+	__u16 flags;
 
 	/* in (pre_kvm_run), out (post_kvm_run) */
 	__u64 cr8;
@@ -814,6 +814,9 @@ struct kvm_ppc_smmu_info {
 #define KVM_CAP_S390_INJECT_IRQ 113
 #define KVM_CAP_S390_IRQ_STATE 114
 #define KVM_CAP_PPC_HWRNG 115
+#define KVM_CAP_DISABLE_QUIRKS 116
+#define KVM_CAP_X86_SMM 117
+#define KVM_CAP_MULTI_ADDRESS_SPACE 118
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1199,6 +1202,8 @@ struct kvm_s390_ucas_mapping {
 /* Available with KVM_CAP_S390_IRQ_STATE */
 #define KVM_S390_SET_IRQ_STATE	  _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state)
 #define KVM_S390_GET_IRQ_STATE	  _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state)
+/* Available with KVM_CAP_X86_SMM */
+#define KVM_SMI                   _IO(KVMIO,   0xb7)
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 #define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
-- 
1.8.3.1

                 reply	other threads:[~2015-06-04 14:42 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433428842-22445-1-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).