From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PULL 56/62] q35: add config space wmask for SMRAM and ESMRAMC
Date: Fri, 5 Jun 2015 17:15:57 +0200 [thread overview]
Message-ID: <1433517363-32335-57-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1433517363-32335-1-git-send-email-pbonzini@redhat.com>
From: Gerd Hoffmann <kraxel@redhat.com>
Not all bits in SMRAM and ESMRAMC can be changed by the guest.
Add wmask defines accordingly and set them in mch_reset().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/pci-host/q35.c | 2 ++
include/hw/pci-host/q35.h | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
index 4e65bdc..14e5aeb 100644
--- a/hw/pci-host/q35.c
+++ b/hw/pci-host/q35.c
@@ -355,6 +355,8 @@ static void mch_reset(DeviceState *qdev)
d->config[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_DEFAULT;
d->config[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_DEFAULT;
+ d->wmask[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_WMASK;
+ d->wmask[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_WMASK;
mch_update(mch);
}
diff --git a/include/hw/pci-host/q35.h b/include/hw/pci-host/q35.h
index d3c7bbb..01b8492 100644
--- a/include/hw/pci-host/q35.h
+++ b/include/hw/pci-host/q35.h
@@ -140,6 +140,11 @@ typedef struct Q35PCIHost {
#define MCH_HOST_BRIDGE_UPPER_SYSTEM_BIOS_END 0x100000
#define MCH_HOST_BRIDGE_SMRAM_DEFAULT \
MCH_HOST_BRIDGE_SMRAM_C_BASE_SEG
+#define MCH_HOST_BRIDGE_SMRAM_WMASK \
+ (MCH_HOST_BRIDGE_SMRAM_D_OPEN | \
+ MCH_HOST_BRIDGE_SMRAM_D_CLS | \
+ MCH_HOST_BRIDGE_SMRAM_D_LCK | \
+ MCH_HOST_BRIDGE_SMRAM_G_SMRAME)
#define MCH_HOST_BRIDGE_ESMRAMC 0x9e
#define MCH_HOST_BRIDGE_ESMRAMC_H_SMRAME ((uint8_t)(1 << 7))
@@ -156,6 +161,10 @@ typedef struct Q35PCIHost {
(MCH_HOST_BRIDGE_ESMRAMC_SM_CACHE | \
MCH_HOST_BRIDGE_ESMRAMC_SM_L1 | \
MCH_HOST_BRIDGE_ESMRAMC_SM_L2)
+#define MCH_HOST_BRIDGE_ESMRAMC_WMASK \
+ (MCH_HOST_BRIDGE_ESMRAMC_H_SMRAME | \
+ MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_MASK | \
+ MCH_HOST_BRIDGE_ESMRAMC_T_EN)
/* D1:F0 PCIE* port*/
#define MCH_PCIE_DEV 1
--
2.4.1
next prev parent reply other threads:[~2015-06-05 15:17 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-05 15:15 [Qemu-devel] [PULL 00/62] KVM, dirty bitmap, build system, SMM, icount changes for 2015-06-05 Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 01/62] Move parallel_hds_isa_init to hw/isa/isa-bus.c Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 02/62] ppc: add helpful message when KVM fails to start VCPU Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 03/62] qemu-nbd: Switch to qemu_set_fd_handler Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 04/62] exec: optimize phys_page_set_level Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 05/62] Makefile.target: set master BUILD_DIR Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 06/62] memory: the only dirty memory flag for users is DIRTY_MEMORY_VGA Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 07/62] g364fb: remove pointless call to memory_region_set_coalescing Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 08/62] display: enable DIRTY_MEMORY_VGA tracking explicitly Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 09/62] display: add memory_region_sync_dirty_bitmap calls Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 10/62] memory: differentiate memory_region_is_logging and memory_region_get_dirty_log_mask Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 11/62] memory: prepare for multiple bits in the dirty log mask Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 12/62] framebuffer: check memory_region_is_logging Paolo Bonzini
2015-07-10 15:44 ` Peter Maydell
2015-07-12 14:09 ` Paolo Bonzini
2015-07-12 22:02 ` Peter Maydell
2015-07-13 6:48 ` Paolo Bonzini
2015-07-13 8:55 ` Peter Maydell
2015-07-13 10:15 ` Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 13/62] ui/console: remove dpy_gfx_update_dirty Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 14/62] memory: track DIRTY_MEMORY_CODE in mr->dirty_log_mask Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 15/62] kvm: accept non-mapped memory in kvm_dirty_pages_log_change Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 16/62] memory: include DIRTY_MEMORY_MIGRATION in the dirty log mask Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 17/62] kvm: remove special handling of " Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 18/62] ram_addr: tweaks to xen_modified_memory Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 19/62] exec: use memory_region_get_dirty_log_mask to optimize dirty tracking Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 20/62] exec: move functions to translate-all.h Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 21/62] translate-all: remove unnecessary argument to tb_invalidate_phys_range Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 22/62] cputlb: remove useless arguments to tlb_unprotect_code_phys, rename Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 23/62] translate-all: make less of tb_invalidate_phys_page_range depend on is_cpu_write_access Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 24/62] exec: pass client mask to cpu_physical_memory_set_dirty_range Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 25/62] exec: invert return value of cpu_physical_memory_get_clean, rename Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 26/62] exec: only check relevant bitmaps for cleanliness Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 27/62] memory: do not touch code dirty bitmap unless TCG is enabled Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 28/62] bitmap: add atomic set functions Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 29/62] bitmap: add atomic test and clear Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 30/62] memory: use atomic ops for setting dirty memory bits Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 31/62] migration: move dirty bitmap sync to ram_addr.h Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 32/62] memory: replace cpu_physical_memory_reset_dirty() with test-and-clear Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 33/62] memory: make cpu_physical_memory_sync_dirty_bitmap() fully atomic Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 34/62] memory: use mr->ram_addr in "is this RAM?" assertions Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 35/62] icount: implement a new icount_sleep mode toggleing real-time cpu sleep Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 36/62] icount: add sleep parameter to the icount option to set icount_sleep mode Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 37/62] icount: print a warning if there is no more deadline in sleep=no mode Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 38/62] target-i386: introduce cpu_get_mem_attrs Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 39/62] target-i386: Use correct memory attributes for memory accesses Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 40/62] target-i386: Use correct memory attributes for ioport accesses Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 41/62] target-i386: mask NMIs on entry to SMM Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 42/62] target-i386: set G=1 in SMM big real mode selectors Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 43/62] target-i386: wake up processors that receive an SMI Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 44/62] pflash_cfi01: change big-endian property to BIT type Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 45/62] pflash_cfi01: change to new-style MMIO accessors Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 46/62] pflash_cfi01: add secure property Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 47/62] vl: allow full-blown QemuOpts syntax for -global Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 48/62] qom: add object_property_add_const_link Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 49/62] vl: run "late" notifiers immediately Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 50/62] target-i386: create a separate AddressSpace for each CPU Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 51/62] hw/i386: add a separate region that tracks the SMRAME bit Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 52/62] target-i386: use memory API to implement SMRAM Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 53/62] hw/i386: remove smram_update Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 54/62] q35: implement high SMRAM Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 55/62] q35: fix ESMRAMC default Paolo Bonzini
2015-06-05 15:15 ` Paolo Bonzini [this message]
2015-06-05 15:15 ` [Qemu-devel] [PULL 57/62] q35: implement SMRAM.D_LCK Paolo Bonzini
2015-06-05 15:15 ` [Qemu-devel] [PULL 58/62] q35: add test for SMRAM.D_LCK Paolo Bonzini
2015-06-05 15:16 ` [Qemu-devel] [PULL 59/62] q35: implement TSEG Paolo Bonzini
2015-06-05 15:16 ` [Qemu-devel] [PULL 60/62] ich9: implement SMI_LOCK Paolo Bonzini
2015-06-05 15:16 ` [Qemu-devel] [PULL 61/62] atomics: add explicit compiler fence in __atomic memory barriers Paolo Bonzini
2015-06-05 15:16 ` [Qemu-devel] [PULL 62/62] update Linux headers from kvm/next Paolo Bonzini
2015-06-05 15:30 ` [Qemu-devel] [PULL 00/62] KVM, dirty bitmap, build system, SMM, icount changes for 2015-06-05 Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433517363-32335-57-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).