From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PULL 12/42] linux-headers: add virtio_pci
Date: Thu, 11 Jun 2015 13:58:39 +0200 [thread overview]
Message-ID: <1434023714-30366-13-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1434023714-30366-1-git-send-email-mst@redhat.com>
Easier than duplicating code.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
---
| 192 +++++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 2 +
2 files changed, 194 insertions(+)
create mode 100644 linux-headers/linux/virtio_pci.h
--git a/linux-headers/linux/virtio_pci.h b/linux-headers/linux/virtio_pci.h
new file mode 100644
index 0000000..92624e5
--- /dev/null
+++ b/linux-headers/linux/virtio_pci.h
@@ -0,0 +1,192 @@
+/*
+ * Virtio PCI driver
+ *
+ * This module allows virtio devices to be used over a virtual PCI device.
+ * This can be used with QEMU based VMMs like KVM or Xen.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors:
+ * Anthony Liguori <aliguori@us.ibm.com>
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_PCI_H
+#define _LINUX_VIRTIO_PCI_H
+
+#include <linux/types.h>
+
+#ifndef VIRTIO_PCI_NO_LEGACY
+
+/* A 32-bit r/o bitmask of the features supported by the host */
+#define VIRTIO_PCI_HOST_FEATURES 0
+
+/* A 32-bit r/w bitmask of features activated by the guest */
+#define VIRTIO_PCI_GUEST_FEATURES 4
+
+/* A 32-bit r/w PFN for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_PFN 8
+
+/* A 16-bit r/o queue size for the currently selected queue */
+#define VIRTIO_PCI_QUEUE_NUM 12
+
+/* A 16-bit r/w queue selector */
+#define VIRTIO_PCI_QUEUE_SEL 14
+
+/* A 16-bit r/w queue notifier */
+#define VIRTIO_PCI_QUEUE_NOTIFY 16
+
+/* An 8-bit device status register. */
+#define VIRTIO_PCI_STATUS 18
+
+/* An 8-bit r/o interrupt status register. Reading the value will return the
+ * current contents of the ISR and will also clear it. This is effectively
+ * a read-and-acknowledge. */
+#define VIRTIO_PCI_ISR 19
+
+/* MSI-X registers: only enabled if MSI-X is enabled. */
+/* A 16-bit vector for configuration changes. */
+#define VIRTIO_MSI_CONFIG_VECTOR 20
+/* A 16-bit vector for selected queue notifications. */
+#define VIRTIO_MSI_QUEUE_VECTOR 22
+
+/* The remaining space is defined by each driver as the per-driver
+ * configuration space */
+#define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20)
+/* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */
+#define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled)
+
+/* Virtio ABI version, this must match exactly */
+#define VIRTIO_PCI_ABI_VERSION 0
+
+/* How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size. */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
+
+/* The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize again. */
+#define VIRTIO_PCI_VRING_ALIGN 4096
+
+#endif /* VIRTIO_PCI_NO_LEGACY */
+
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG 0x2
+/* Vector value used to disable MSI for queue */
+#define VIRTIO_MSI_NO_VECTOR 0xffff
+
+#ifndef VIRTIO_PCI_NO_MODERN
+
+/* IDs for different capabilities. Must all exist. */
+
+/* Common configuration */
+#define VIRTIO_PCI_CAP_COMMON_CFG 1
+/* Notifications */
+#define VIRTIO_PCI_CAP_NOTIFY_CFG 2
+/* ISR access */
+#define VIRTIO_PCI_CAP_ISR_CFG 3
+/* Device specific confiuration */
+#define VIRTIO_PCI_CAP_DEVICE_CFG 4
+
+/* This is the PCI capability header: */
+struct virtio_pci_cap {
+ __u8 cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */
+ __u8 cap_next; /* Generic PCI field: next ptr. */
+ __u8 cap_len; /* Generic PCI field: capability length */
+ __u8 cfg_type; /* Identifies the structure. */
+ __u8 bar; /* Where to find it. */
+ __u8 padding[3]; /* Pad to full dword. */
+ __le32 offset; /* Offset within bar. */
+ __le32 length; /* Length of the structure, in bytes. */
+};
+
+struct virtio_pci_notify_cap {
+ struct virtio_pci_cap cap;
+ __le32 notify_off_multiplier; /* Multiplier for queue_notify_off. */
+};
+
+/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
+struct virtio_pci_common_cfg {
+ /* About the whole device. */
+ __le32 device_feature_select; /* read-write */
+ __le32 device_feature; /* read-only */
+ __le32 guest_feature_select; /* read-write */
+ __le32 guest_feature; /* read-write */
+ __le16 msix_config; /* read-write */
+ __le16 num_queues; /* read-only */
+ __u8 device_status; /* read-write */
+ __u8 config_generation; /* read-only */
+
+ /* About a specific virtqueue. */
+ __le16 queue_select; /* read-write */
+ __le16 queue_size; /* read-write, power of 2. */
+ __le16 queue_msix_vector; /* read-write */
+ __le16 queue_enable; /* read-write */
+ __le16 queue_notify_off; /* read-only */
+ __le32 queue_desc_lo; /* read-write */
+ __le32 queue_desc_hi; /* read-write */
+ __le32 queue_avail_lo; /* read-write */
+ __le32 queue_avail_hi; /* read-write */
+ __le32 queue_used_lo; /* read-write */
+ __le32 queue_used_hi; /* read-write */
+};
+
+/* Macro versions of offsets for the Old Timers! */
+#define VIRTIO_PCI_CAP_VNDR 0
+#define VIRTIO_PCI_CAP_NEXT 1
+#define VIRTIO_PCI_CAP_LEN 2
+#define VIRTIO_PCI_CAP_CFG_TYPE 3
+#define VIRTIO_PCI_CAP_BAR 4
+#define VIRTIO_PCI_CAP_OFFSET 8
+#define VIRTIO_PCI_CAP_LENGTH 12
+
+#define VIRTIO_PCI_NOTIFY_CAP_MULT 16
+
+
+#define VIRTIO_PCI_COMMON_DFSELECT 0
+#define VIRTIO_PCI_COMMON_DF 4
+#define VIRTIO_PCI_COMMON_GFSELECT 8
+#define VIRTIO_PCI_COMMON_GF 12
+#define VIRTIO_PCI_COMMON_MSIX 16
+#define VIRTIO_PCI_COMMON_NUMQ 18
+#define VIRTIO_PCI_COMMON_STATUS 20
+#define VIRTIO_PCI_COMMON_CFGGENERATION 21
+#define VIRTIO_PCI_COMMON_Q_SELECT 22
+#define VIRTIO_PCI_COMMON_Q_SIZE 24
+#define VIRTIO_PCI_COMMON_Q_MSIX 26
+#define VIRTIO_PCI_COMMON_Q_ENABLE 28
+#define VIRTIO_PCI_COMMON_Q_NOFF 30
+#define VIRTIO_PCI_COMMON_Q_DESCLO 32
+#define VIRTIO_PCI_COMMON_Q_DESCHI 36
+#define VIRTIO_PCI_COMMON_Q_AVAILLO 40
+#define VIRTIO_PCI_COMMON_Q_AVAILHI 44
+#define VIRTIO_PCI_COMMON_Q_USEDLO 48
+#define VIRTIO_PCI_COMMON_Q_USEDHI 52
+
+#endif /* VIRTIO_PCI_NO_MODERN */
+
+#endif
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 6d4f64e..8dca87c 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -38,6 +38,8 @@
#define VIRTIO_PCI_REGION_SIZE(dev) VIRTIO_PCI_CONFIG_OFF(msix_present(dev))
+#undef VIRTIO_PCI_CONFIG
+
/* The remaining space is defined by each driver as the per-driver
* configuration space */
#define VIRTIO_PCI_CONFIG_SIZE(dev) VIRTIO_PCI_CONFIG_OFF(msix_enabled(dev))
--
MST
next prev parent reply other threads:[~2015-06-11 11:58 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-11 11:57 [Qemu-devel] [PULL 00/42] pc, acpi, virtio Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 01/42] vhost: put log correctly in vhost_dev_start() Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 02/42] virtio: endianness checks for virtio 1.0 devices Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 03/42] virtio: allow virtio-1 queue layout Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 04/42] dataplane: allow virtio-1 devices Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 05/42] virtio: disallow late feature changes for virtio-1 Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 06/42] virtio: allow to fail setting status Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 07/42] virtio-net: no writeable mac for virtio-1 Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 08/42] virtio-net: support longer header Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 09/42] virtio-net: enable virtio 1.0 Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 10/42] vhost_net: add version_1 feature Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 11/42] vhost: 64 bit features Michael S. Tsirkin
2015-06-11 11:58 ` Michael S. Tsirkin [this message]
2015-06-11 11:58 ` [Qemu-devel] [PULL 13/42] virtio-pci: initial virtio 1.0 support Michael S. Tsirkin
2015-06-20 21:08 ` Paolo Bonzini
2015-06-11 11:58 ` [Qemu-devel] [PULL 14/42] virtio: generation counter support Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 15/42] virtio: add modern config accessors Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 16/42] virtio-pci: switch to modern accessors for 1.0 Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 17/42] virtio-pci: add flags to enable/disable legacy/modern Michael S. Tsirkin
2015-06-11 11:58 ` [Qemu-devel] [PULL 18/42] virtio-pci: make QEMU_VIRTIO_PCI_QUEUE_MEM_MULT smaller Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 19/42] virtio-pci: change & document virtio pci bar layout Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 20/42] virtio-pci: make modern bar 64bit + prefetchable Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 21/42] virtio-pci: correctly set host notifiers for modern bar Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 22/42] virtio_balloon: header update Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 23/42] virtio-balloon: switch to virtio_add_feature Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 24/42] virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 25/42] virtio-pci: add virtio_pci_modern_regions_init() Michael S. Tsirkin
2015-06-11 11:59 ` [Qemu-devel] [PULL 26/42] virtio-pci: add virtio_pci_modern_region_map() Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 27/42] virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 28/42] virtio-pci: move cap type to VirtIOPCIRegion Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 29/42] virtio-pci: drop identical virtio_pci_cap Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 30/42] virtio-pci: fill VirtIOPCIRegions early Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 31/42] pci: add PCI_CLASS_INPUT_* Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 32/42] virtio-input: core code & base class [pci] Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 33/42] virtio-input: emulated devices [pci] Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 34/42] virtio-net: move qdev properties into virtio-net.c Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 35/42] virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES Michael S. Tsirkin
2015-06-11 12:00 ` [Qemu-devel] [PULL 36/42] virtio-scsi: move qdev properties into virtio-scsi.c Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 37/42] virtio-rng: move qdev properties into virtio-rng.c Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 38/42] virtio-serial-bus: move qdev properties into virtio-serial-bus.c Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 39/42] virtio-9p-device: move qdev properties into virtio-9p-device.c Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 40/42] vhost-scsi: move qdev properties into vhost-scsi.c Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 41/42] i386/acpi-build: more traditional _UID and _HID for PXB root buses Michael S. Tsirkin
2015-06-11 12:01 ` [Qemu-devel] [PULL 42/42] i386/acpi-build: fix PXB workarounds for unsupported BIOSes Michael S. Tsirkin
2015-06-11 15:44 ` [Qemu-devel] [PULL 00/42] pc, acpi, virtio Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434023714-30366-13-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).