From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 25/29] target-mips: support Page Frame Number Extension field
Date: Fri, 12 Jun 2015 10:35:32 +0100 [thread overview]
Message-ID: <1434101736-11558-26-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1434101736-11558-1-git-send-email-leon.alrae@imgtec.com>
Update tlb->PFN to contain PFN concatenated with PFNX. PFNX is 0 if large
physical address is not supported.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
---
target-mips/op_helper.c | 32 ++++++++++++++++++++++++++------
1 file changed, 26 insertions(+), 6 deletions(-)
diff --git a/target-mips/op_helper.c b/target-mips/op_helper.c
index 4dc4970..31bafcf 100644
--- a/target-mips/op_helper.c
+++ b/target-mips/op_helper.c
@@ -1826,6 +1826,16 @@ static void r4k_mips_tlb_flush_extra (CPUMIPSState *env, int first)
}
}
+static inline uint64_t get_tlb_pfn_from_entrylo(uint64_t entrylo)
+{
+#if defined(TARGET_MIPS64)
+ return extract64(entrylo, 6, 54);
+#else
+ return extract64(entrylo, 6, 24) | /* PFN */
+ (extract64(entrylo, 32, 32) << 24); /* PFNX */
+#endif
+}
+
static void r4k_fill_tlb(CPUMIPSState *env, int idx)
{
r4k_tlb_t *tlb;
@@ -1849,13 +1859,13 @@ static void r4k_fill_tlb(CPUMIPSState *env, int idx)
tlb->C0 = (env->CP0_EntryLo0 >> 3) & 0x7;
tlb->XI0 = (env->CP0_EntryLo0 >> CP0EnLo_XI) & 1;
tlb->RI0 = (env->CP0_EntryLo0 >> CP0EnLo_RI) & 1;
- tlb->PFN[0] = (env->CP0_EntryLo0 >> 6) << 12;
+ tlb->PFN[0] = get_tlb_pfn_from_entrylo(env->CP0_EntryLo0) << 12;
tlb->V1 = (env->CP0_EntryLo1 & 2) != 0;
tlb->D1 = (env->CP0_EntryLo1 & 4) != 0;
tlb->C1 = (env->CP0_EntryLo1 >> 3) & 0x7;
tlb->XI1 = (env->CP0_EntryLo1 >> CP0EnLo_XI) & 1;
tlb->RI1 = (env->CP0_EntryLo1 >> CP0EnLo_RI) & 1;
- tlb->PFN[1] = (env->CP0_EntryLo1 >> 6) << 12;
+ tlb->PFN[1] = get_tlb_pfn_from_entrylo(env->CP0_EntryLo1) << 12;
}
void r4k_helper_tlbinv(CPUMIPSState *env)
@@ -1972,6 +1982,16 @@ void r4k_helper_tlbp(CPUMIPSState *env)
}
}
+static inline uint64_t get_entrylo_pfn_from_tlb(uint64_t tlb_pfn)
+{
+#if defined(TARGET_MIPS64)
+ return tlb_pfn << 6;
+#else
+ return (extract64(tlb_pfn, 0, 24) << 6) | /* PFN */
+ (extract64(tlb_pfn, 24, 32) << 32); /* PFNX */
+#endif
+}
+
void r4k_helper_tlbr(CPUMIPSState *env)
{
r4k_tlb_t *tlb;
@@ -1998,12 +2018,12 @@ void r4k_helper_tlbr(CPUMIPSState *env)
env->CP0_PageMask = tlb->PageMask;
env->CP0_EntryLo0 = tlb->G | (tlb->V0 << 1) | (tlb->D0 << 2) |
((uint64_t)tlb->RI0 << CP0EnLo_RI) |
- ((uint64_t)tlb->XI0 << CP0EnLo_XI) |
- (tlb->C0 << 3) | (tlb->PFN[0] >> 6);
+ ((uint64_t)tlb->XI0 << CP0EnLo_XI) | (tlb->C0 << 3) |
+ get_entrylo_pfn_from_tlb(tlb->PFN[0] >> 12);
env->CP0_EntryLo1 = tlb->G | (tlb->V1 << 1) | (tlb->D1 << 2) |
((uint64_t)tlb->RI1 << CP0EnLo_RI) |
- ((uint64_t)tlb->XI1 << CP0EnLo_XI) |
- (tlb->C1 << 3) | (tlb->PFN[1] >> 6);
+ ((uint64_t)tlb->XI1 << CP0EnLo_XI) | (tlb->C1 << 3) |
+ get_entrylo_pfn_from_tlb(tlb->PFN[1] >> 12);
}
}
--
2.1.0
next prev parent reply other threads:[~2015-06-12 9:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-12 9:35 [Qemu-devel] [PULL 00/29] target-mips queue Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 01/29] target-mips: move group of functions above gen_load_fpr32() Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 02/29] target-mips: add Config5.FRE support allowing Status.FR=0 emulation Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 03/29] mips_malta: provide ememsize env variable to kernels Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 04/29] target-mips: Misaligned memory accesses for R6 Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 05/29] softmmu: Add probe_write() Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 06/29] target-mips: Misaligned memory accesses for MSA Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 07/29] target-mips: add ERETNC instruction and Config5.LLB bit Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 08/29] mips jazz: compile only in 64 bit Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 09/29] dma/rc4030: create custom DMA address space Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 10/29] dma/rc4030: use AddressSpace and address_space_rw in users Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 11/29] dma/rc4030: do not use old_mmio accesses Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 12/29] dma/rc4030: document register at offset 0x210 Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 13/29] dma/rc4030: use trace events instead of custom logging Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 14/29] dma/rc4030: convert to QOM Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 15/29] net/dp8393x: always calculate proper checksums Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 16/29] net/dp8393x: do not use old_mmio accesses Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 17/29] net/dp8393x: use dp8393x_ prefix for all functions Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 18/29] net/dp8393x: QOM'ify Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 19/29] net/dp8393x: add PROM to store MAC address Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 20/29] net/dp8393x: add load/save support Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 21/29] net/dp8393x: correctly reset in_use field Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 22/29] net/dp8393x: fix hardware reset Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 23/29] target-mips: correct MFC0 for CP0.EntryLo in MIPS64 Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 24/29] target-mips: extend selected CP0 registers to 64-bits in MIPS32 Leon Alrae
2015-06-12 9:35 ` Leon Alrae [this message]
2015-06-12 9:35 ` [Qemu-devel] [PULL 26/29] target-mips: add CP0.PageGrain.ELPA support Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 27/29] target-mips: add MTHC0 and MFHC0 instructions Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 28/29] target-mips: remove misleading comments in translate_init.c Leon Alrae
2015-06-12 9:35 ` [Qemu-devel] [PULL 29/29] target-mips: enable XPA and LPA features Leon Alrae
2015-06-12 13:30 ` [Qemu-devel] [PULL 00/29] target-mips queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434101736-11558-26-git-send-email-leon.alrae@imgtec.com \
--to=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).