qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Don Slutz <dslutz@verizon.com>
To: qemu-devel@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	"Markus Armbruster" <armbru@redhat.com>,
	"Don Slutz" <dslutz@verizon.com>,
	"Luiz Capitulino" <lcapitulino@redhat.com>,
	"Don Slutz" <don.slutz@gmail.com>,
	"Anthony Liguori" <aliguori@amazon.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Andreas Färber" <afaerber@suse.de>,
	"Richard Henderson" <rth@twiddle.net>
Subject: [Qemu-devel] [PATCH v7 2/9] vmport: Switch to trace
Date: Fri, 12 Jun 2015 10:05:49 -0400	[thread overview]
Message-ID: <1434117956-4929-3-git-send-email-dslutz@verizon.com> (raw)
In-Reply-To: <1434117956-4929-1-git-send-email-dslutz@verizon.com>

Signed-off-by: Don Slutz <dslutz@verizon.com>
CC: Don Slutz <don.slutz@gmail.com>
---
 hw/misc/vmport.c | 7 +++----
 trace-events     | 4 ++++
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/hw/misc/vmport.c b/hw/misc/vmport.c
index 51b64bc..203e892 100644
--- a/hw/misc/vmport.c
+++ b/hw/misc/vmport.c
@@ -27,7 +27,7 @@
 #include "sysemu/kvm.h"
 #include "hw/qdev.h"
 
-//#define VMPORT_DEBUG
+#include "trace.h"
 
 #define VMPORT_CMD_GETVERSION 0x0a
 #define VMPORT_CMD_GETRAMSIZE 0x14
@@ -71,6 +71,7 @@ static uint64_t vmport_ioport_read(void *opaque, hwaddr addr,
 
     /* Only support 1 address */
     if (addr) {
+        trace_vmport_ioport_ignored(addr, size, cs);
         return ~0U;
     }
     cpu_synchronize_state(cs);
@@ -84,9 +85,7 @@ static uint64_t vmport_ioport_read(void *opaque, hwaddr addr,
         return eax;
     if (!s->func[command])
     {
-#ifdef VMPORT_DEBUG
-        fprintf(stderr, "vmport: unknown command %x\n", command);
-#endif
+        trace_vmport_ioport_unknown_command(command);
         return eax;
     }
 
diff --git a/trace-events b/trace-events
index d6c73e6..e229aac 100644
--- a/trace-events
+++ b/trace-events
@@ -883,6 +883,10 @@ pc87312_info_ide(uint32_t base) "base 0x%x"
 pc87312_info_parallel(uint32_t base, uint32_t irq) "base 0x%x, irq %u"
 pc87312_info_serial(int n, uint32_t base, uint32_t irq) "id=%d, base 0x%x, irq %u"
 
+# hw/misc/vmport.c
+vmport_ioport_ignored(uint64_t addr, uint32_t size, void *cs) "addr=%#" PRIx64 " size=%u cs=%p"
+vmport_ioport_unknown_command(unsigned char command) "%x"
+
 # hw/scsi/vmw_pvscsi.c
 pvscsi_ring_init_data(uint32_t txr_len_log2, uint32_t rxr_len_log2) "TX/RX rings logarithms set to %d/%d"
 pvscsi_ring_init_msg(uint32_t len_log2) "MSG ring logarithm set to %d"
-- 
1.8.4

  parent reply	other threads:[~2015-06-12 14:06 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-12 14:05 [Qemu-devel] [PATCH v7 0/9] Add limited support of VMware's hyper-call rpc Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [BUGFIX][PATCH v7 1/9] vmport: The io memory region needs to be at least a size of 4 Don Slutz
2015-06-12 22:38   ` Eric Blake
2015-06-15 13:53     ` Don Slutz
2015-06-15 15:09       ` Eric Blake
2015-06-15 16:15         ` Don Slutz
2015-06-12 14:05 ` Don Slutz [this message]
2015-06-12 14:05 ` [Qemu-devel] [BUGFIX][PATCH v7 3/9] vmport: Fix vmport_cmd_ram_size Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 4/9] vmport_rpc: Add the object vmport_rpc Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 5/9] vmport_rpc: Add limited support of VMware's hyper-call rpc Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 6/9] vmport_rpc: Add QMP access to vmport_rpc object Don Slutz
2015-06-15 15:53   ` Eric Blake
2015-06-17 16:42     ` Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 7/9] vmport_rpc: Add migration Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 8/9] vmport: Add VMware all ring hack Don Slutz
2015-06-12 14:05 ` [Qemu-devel] [PATCH v7 9/9] MAINTAINERS: add VMware port Don Slutz
2015-06-17 13:44 ` [Qemu-devel] [PATCH v7 0/9] Add limited support of VMware's hyper-call rpc Paolo Bonzini
2015-06-17 22:26   ` Don Slutz
2015-06-18  7:58     ` Michael S. Tsirkin
2015-06-18  8:33       ` Paolo Bonzini
2015-06-18  9:40         ` Michael S. Tsirkin
2015-06-18  8:33     ` Paolo Bonzini
2015-06-17 14:11 ` Michael S. Tsirkin
2015-06-17 14:13   ` Paolo Bonzini
2015-06-17 14:18     ` Michael S. Tsirkin
2015-06-17 14:27       ` Paolo Bonzini
2015-06-17 14:29         ` Michael S. Tsirkin
2015-06-17 16:17           ` Paolo Bonzini
2015-06-17 16:29             ` Michael S. Tsirkin
2015-06-17 16:48               ` Paolo Bonzini
2015-06-17 18:43                 ` Michael S. Tsirkin
2015-06-17 19:15                   ` Paolo Bonzini
2015-06-17 19:22                     ` Michael S. Tsirkin
2015-06-17 19:24                       ` Paolo Bonzini
2015-06-17 19:29                         ` Michael S. Tsirkin
2015-06-17 17:03               ` Don Slutz
2015-06-17 17:14                 ` Paolo Bonzini
2015-06-17 17:25                   ` Paolo Bonzini
2015-06-17 17:34                     ` Don Slutz
2015-06-17 18:58                       ` Michael S. Tsirkin
2015-06-18 18:40                         ` Don Slutz
2015-06-17 18:45                   ` Michael S. Tsirkin
2015-06-17 18:45                 ` Michael S. Tsirkin
2015-06-18  7:03             ` Gerd Hoffmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434117956-4929-3-git-send-email-dslutz@verizon.com \
    --to=dslutz@verizon.com \
    --cc=afaerber@suse.de \
    --cc=aliguori@amazon.com \
    --cc=armbru@redhat.com \
    --cc=don.slutz@gmail.com \
    --cc=lcapitulino@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).