From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
quintela@redhat.com, liang.z.li@intel.com, luis@cs.umu.se,
amit.shah@redhat.com, pbonzini@redhat.com,
david@gibson.dropbear.id.au
Subject: [Qemu-devel] [PATCH v7 18/42] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages.
Date: Tue, 16 Jun 2015 11:26:31 +0100 [thread overview]
Message-ID: <1434450415-11339-19-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1434450415-11339-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
include/migration/migration.h | 16 +++
include/sysemu/sysemu.h | 20 ++++
migration/migration.c | 13 +++
migration/savevm.c | 247 ++++++++++++++++++++++++++++++++++++++++++
trace-events | 10 ++
5 files changed, 306 insertions(+)
diff --git a/include/migration/migration.h b/include/migration/migration.h
index da4b72f..a5951ac 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -50,6 +50,15 @@ enum mig_rp_message_type {
};
typedef QLIST_HEAD(, LoadStateEntry) LoadStateEntry_Head;
+
+typedef enum {
+ POSTCOPY_INCOMING_NONE = 0, /* Initial state - no postcopy */
+ POSTCOPY_INCOMING_ADVISE,
+ POSTCOPY_INCOMING_LISTENING,
+ POSTCOPY_INCOMING_RUNNING,
+ POSTCOPY_INCOMING_END
+} PostcopyState;
+
/* State for the incoming migration */
struct MigrationIncomingState {
QEMUFile *file;
@@ -62,6 +71,7 @@ struct MigrationIncomingState {
QEMUFile *return_path;
QemuMutex rp_mutex; /* We send replies from multiple threads */
+ PostcopyState postcopy_state;
/* See savevm.c */
LoadStateEntry_Head loadvm_handlers;
@@ -231,4 +241,10 @@ size_t ram_control_save_page(QEMUFile *f, ram_addr_t block_offset,
void ram_mig_init(void);
void savevm_skip_section_footers(void);
+
+PostcopyState postcopy_state_get(MigrationIncomingState *mis);
+
+/* Set the state and return the old state */
+PostcopyState postcopy_state_set(MigrationIncomingState *mis,
+ PostcopyState new_state);
#endif
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index d8875ca..c5738f5 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -87,6 +87,17 @@ enum qemu_vm_cmd {
MIG_CMD_INVALID = 0, /* Must be 0 */
MIG_CMD_OPEN_RETURN_PATH, /* Tell the dest to open the Return path */
MIG_CMD_PING, /* Request a PONG on the RP */
+
+ MIG_CMD_POSTCOPY_ADVISE = 20, /* Prior to any page transfers, just
+ warn we might want to do PC */
+ MIG_CMD_POSTCOPY_LISTEN, /* Start listening for incoming
+ pages as it's running. */
+ MIG_CMD_POSTCOPY_RUN, /* Start execution */
+
+ MIG_CMD_POSTCOPY_RAM_DISCARD, /* A list of pages to discard that
+ were previously sent during
+ precopy but are dirty. */
+
};
bool qemu_savevm_state_blocked(Error **errp);
@@ -101,6 +112,15 @@ void qemu_savevm_command_send(QEMUFile *f, enum qemu_vm_cmd command,
uint16_t len, uint8_t *data);
void qemu_savevm_send_ping(QEMUFile *f, uint32_t value);
void qemu_savevm_send_open_return_path(QEMUFile *f);
+void qemu_savevm_send_postcopy_advise(QEMUFile *f);
+void qemu_savevm_send_postcopy_listen(QEMUFile *f);
+void qemu_savevm_send_postcopy_run(QEMUFile *f);
+
+void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
+ uint16_t len,
+ uint64_t *start_list,
+ uint64_t *end_list);
+
int qemu_loadvm_state(QEMUFile *f);
typedef enum DisplayType
diff --git a/migration/migration.c b/migration/migration.c
index cd89a9b..34cd9a6 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1128,3 +1128,16 @@ void migrate_fd_connect(MigrationState *s)
qemu_thread_create(&s->thread, "migration", migration_thread, s,
QEMU_THREAD_JOINABLE);
}
+
+PostcopyState postcopy_state_get(MigrationIncomingState *mis)
+{
+ return atomic_fetch_add(&mis->postcopy_state, 0);
+}
+
+/* Set the state and return the old state */
+PostcopyState postcopy_state_set(MigrationIncomingState *mis,
+ PostcopyState new_state)
+{
+ return atomic_xchg(&mis->postcopy_state, new_state);
+}
+
diff --git a/migration/savevm.c b/migration/savevm.c
index 7052a6f..7b2f086 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -43,6 +43,7 @@
#include "exec/memory.h"
#include "qmp-commands.h"
#include "trace.h"
+#include "qemu/bitops.h"
#include "qemu/iov.h"
#include "block/snapshot.h"
#include "block/qapi.h"
@@ -717,6 +718,77 @@ void qemu_savevm_send_open_return_path(QEMUFile *f)
qemu_savevm_command_send(f, MIG_CMD_OPEN_RETURN_PATH, 0, NULL);
}
+/* Send prior to any postcopy transfer */
+void qemu_savevm_send_postcopy_advise(QEMUFile *f)
+{
+ uint64_t tmp[2];
+ tmp[0] = cpu_to_be64(getpagesize());
+ tmp[1] = cpu_to_be64(1ul << qemu_target_page_bits());
+
+ trace_qemu_savevm_send_postcopy_advise();
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 16, (uint8_t *)tmp);
+}
+
+/* Sent prior to starting the destination running in postcopy, discard pages
+ * that have already been sent but redirtied on the source.
+ * CMD_POSTCOPY_RAM_DISCARD consist of:
+ * byte version (0)
+ * byte Length of name field (not including 0)
+ * n x byte RAM block name
+ * byte 0 terminator (just for safety)
+ * n x Byte ranges within the named RAMBlock
+ * be64 Start of the range
+ * be64 end of the range + 1
+ *
+ * name: RAMBlock name that these entries are part of
+ * len: Number of page entries
+ * start_list: 'len' addresses
+ * end_list: 'len' addresses
+ *
+ */
+void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
+ uint16_t len,
+ uint64_t *start_list,
+ uint64_t *end_list)
+{
+ uint8_t *buf;
+ uint16_t tmplen;
+ uint16_t t;
+ size_t name_len = strlen(name);
+
+ trace_qemu_savevm_send_postcopy_ram_discard(name, len);
+ buf = g_malloc0(len*16 + name_len + 3);
+ buf[0] = 0; /* Version */
+ assert(name_len < 256);
+ buf[1] = name_len;
+ memcpy(buf+2, name, name_len);
+ tmplen = 2+name_len;
+ buf[tmplen++] = '\0';
+
+ for (t = 0; t < len; t++) {
+ cpu_to_be64w((uint64_t *)(buf + tmplen), start_list[t]);
+ tmplen += 8;
+ cpu_to_be64w((uint64_t *)(buf + tmplen), end_list[t]);
+ tmplen += 8;
+ }
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RAM_DISCARD, tmplen, buf);
+ g_free(buf);
+}
+
+/* Get the destination into a state where it can receive postcopy data. */
+void qemu_savevm_send_postcopy_listen(QEMUFile *f)
+{
+ trace_savevm_send_postcopy_listen();
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_LISTEN, 0, NULL);
+}
+
+/* Kick the destination into running */
+void qemu_savevm_send_postcopy_run(QEMUFile *f)
+{
+ trace_savevm_send_postcopy_run();
+ qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
+}
+
bool qemu_savevm_state_blocked(Error **errp)
{
SaveStateEntry *se;
@@ -1020,6 +1092,154 @@ enum LoadVMExitCodes {
static int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis);
+/* ------ incoming postcopy messages ------ */
+/* 'advise' arrives before any transfers just to tell us that a postcopy
+ * *might* happen - it might be skipped if precopy transferred everything
+ * quickly.
+ */
+static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis,
+ uint64_t remote_hps,
+ uint64_t remote_tps)
+{
+ PostcopyState ps = postcopy_state_get(mis);
+ trace_loadvm_postcopy_handle_advise();
+ if (ps != POSTCOPY_INCOMING_NONE) {
+ error_report("CMD_POSTCOPY_ADVISE in wrong postcopy state (%d)", ps);
+ return -1;
+ }
+
+ if (remote_hps != getpagesize()) {
+ /*
+ * Some combinations of mismatch are probably possible but it gets
+ * a bit more complicated. In particular we need to place whole
+ * host pages on the dest at once, and we need to ensure that we
+ * handle dirtying to make sure we never end up sending part of
+ * a hostpage on it's own.
+ */
+ error_report("Postcopy needs matching host page sizes (s=%d d=%d)",
+ (int)remote_hps, getpagesize());
+ return -1;
+ }
+
+ if (remote_tps != (1ul << qemu_target_page_bits())) {
+ /*
+ * Again, some differences could be dealt with, but for now keep it
+ * simple.
+ */
+ error_report("Postcopy needs matching target page sizes (s=%d d=%d)",
+ (int)remote_tps, 1 << qemu_target_page_bits());
+ return -1;
+ }
+
+ postcopy_state_set(mis, POSTCOPY_INCOMING_ADVISE);
+
+ return 0;
+}
+
+/* After postcopy we will be told to throw some pages away since they're
+ * dirty and will have to be demand fetched. Must happen before CPU is
+ * started.
+ * There can be 0..many of these messages, each encoding multiple pages.
+ */
+static int loadvm_postcopy_ram_handle_discard(MigrationIncomingState *mis,
+ uint16_t len)
+{
+ int tmp;
+ char ramid[256];
+ PostcopyState ps = postcopy_state_get(mis);
+
+ trace_loadvm_postcopy_ram_handle_discard();
+
+ if (ps != POSTCOPY_INCOMING_ADVISE) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD in wrong postcopy state (%d)",
+ ps);
+ return -1;
+ }
+ /* We're expecting a
+ * Version (0)
+ * a RAM ID string (length byte, name, 0 term)
+ * then at least 1 16 byte chunk
+ */
+ if (len < 20) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
+ return -1;
+ }
+
+ tmp = qemu_get_byte(mis->file);
+ if (tmp != 0) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD invalid version (%d)", tmp);
+ return -1;
+ }
+
+ if (!qemu_get_counted_string(mis->file, ramid)) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD Failed to read RAMBlock ID");
+ return -1;
+ }
+ tmp = qemu_get_byte(mis->file);
+ if (tmp != 0) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD missing nil (%d)", tmp);
+ return -1;
+ }
+
+ len -= 3+strlen(ramid);
+ if (len % 16) {
+ error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
+ return -1;
+ }
+ trace_loadvm_postcopy_ram_handle_discard_header(ramid, len);
+ while (len) {
+ /* TODO - ram_discard_range gets added in a later patch
+ uint64_t start_addr, end_addr;
+ start_addr = qemu_get_be64(mis->file);
+ end_addr = qemu_get_be64(mis->file);
+
+ len -= 16;
+ int ret = ram_discard_range(mis, ramid, start_addr, end_addr - 1);
+ if (ret) {
+ return ret;
+ }
+ */
+ }
+ trace_loadvm_postcopy_ram_handle_discard_end();
+
+ return 0;
+}
+
+/* After this message we must be able to immediately receive postcopy data */
+static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
+{
+ PostcopyState ps = postcopy_state_set(mis, POSTCOPY_INCOMING_LISTENING);
+ trace_loadvm_postcopy_handle_listen();
+ if (ps != POSTCOPY_INCOMING_ADVISE) {
+ error_report("CMD_POSTCOPY_LISTEN in wrong postcopy state (%d)", ps);
+ return -1;
+ }
+
+ /* TODO start up the postcopy listening thread */
+ return 0;
+}
+
+/* After all discards we can start running and asking for pages */
+static int loadvm_postcopy_handle_run(MigrationIncomingState *mis)
+{
+ PostcopyState ps = postcopy_state_set(mis, POSTCOPY_INCOMING_RUNNING);
+ trace_loadvm_postcopy_handle_run();
+ if (ps != POSTCOPY_INCOMING_LISTENING) {
+ error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps);
+ return -1;
+ }
+
+ if (autostart) {
+ /* Hold onto your hats, starting the CPU */
+ vm_start();
+ } else {
+ /* leave it paused and let management decide when to start the CPU */
+ runstate_set(RUN_STATE_PAUSED);
+ }
+
+ return 0;
+}
+
static int loadvm_process_command_simple_lencheck(const char *name,
unsigned int actual,
unsigned int expected)
@@ -1045,6 +1265,7 @@ static int loadvm_process_command(QEMUFile *f)
uint16_t cmd;
uint16_t len;
uint32_t tmp32;
+ uint64_t tmp64a, tmp64b;
cmd = qemu_get_be16(f);
len = qemu_get_be16(f);
@@ -1083,6 +1304,32 @@ static int loadvm_process_command(QEMUFile *f)
migrate_send_rp_pong(mis, tmp32);
break;
+ case MIG_CMD_POSTCOPY_ADVISE:
+ if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_ADVISE",
+ len, 16)) {
+ return -1;
+ }
+ tmp64a = qemu_get_be64(f); /* hps */
+ tmp64b = qemu_get_be64(f); /* tps */
+ return loadvm_postcopy_handle_advise(mis, tmp64a, tmp64b);
+
+ case MIG_CMD_POSTCOPY_LISTEN:
+ if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_LISTEN",
+ len, 0)) {
+ return -1;
+ }
+ return loadvm_postcopy_handle_listen(mis);
+
+ case MIG_CMD_POSTCOPY_RUN:
+ if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_RUN",
+ len, 0)) {
+ return -1;
+ }
+ return loadvm_postcopy_handle_run(mis);
+
+ case MIG_CMD_POSTCOPY_RAM_DISCARD:
+ return loadvm_postcopy_ram_handle_discard(mis, len);
+
default:
error_report("VM_COMMAND 0x%x unknown (len 0x%x)", cmd, len);
return -1;
diff --git a/trace-events b/trace-events
index 5644cc2..44ac831 100644
--- a/trace-events
+++ b/trace-events
@@ -1187,11 +1187,21 @@ qemu_loadvm_state_main(void) ""
qemu_loadvm_state_main_quit_parent(void) ""
qemu_loadvm_state_post_main(int ret) "%d"
qemu_loadvm_state_section_startfull(uint32_t section_id, const char *idstr, uint32_t instance_id, uint32_t version_id) "%u(%s) %u %u"
+loadvm_postcopy_handle_advise(void) ""
+loadvm_postcopy_handle_listen(void) ""
+loadvm_postcopy_handle_run(void) ""
+loadvm_postcopy_ram_handle_discard(void) ""
+loadvm_postcopy_ram_handle_discard_end(void) ""
+loadvm_postcopy_ram_handle_discard_header(const char *ramid, uint16_t len) "%s: %ud"
loadvm_process_command(uint16_t com, uint16_t len) "com=0x%x len=%d"
loadvm_process_command_ping(uint32_t val) "%x"
+qemu_savevm_send_postcopy_advise(void) ""
+qemu_savevm_send_postcopy_ram_discard(const char *id, uint16_t len) "%s: %ud"
savevm_section_start(const char *id, unsigned int section_id) "%s, section_id %u"
savevm_section_end(const char *id, unsigned int section_id, int ret) "%s, section_id %u -> %d"
savevm_send_ping(uint32_t val) "%x"
+savevm_send_postcopy_listen(void) ""
+savevm_send_postcopy_run(void) ""
savevm_state_begin(void) ""
savevm_state_header(void) ""
savevm_state_iterate(void) ""
--
2.4.3
next prev parent reply other threads:[~2015-06-16 10:27 UTC|newest]
Thread overview: 209+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 10:26 [Qemu-devel] [PATCH v7 00/42] Postcopy implementation Dr. David Alan Gilbert (git)
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 01/42] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2015-06-17 11:42 ` Juan Quintela
2015-06-17 12:30 ` Dr. David Alan Gilbert
2015-06-18 7:50 ` Li, Liang Z
2015-06-18 8:10 ` Dr. David Alan Gilbert
2015-06-18 8:28 ` Paolo Bonzini
2015-06-19 17:52 ` Dr. David Alan Gilbert
2015-06-26 6:46 ` Yang Hongyang
2015-06-26 7:53 ` zhanghailiang
2015-06-26 8:00 ` Yang Hongyang
2015-06-26 8:10 ` Dr. David Alan Gilbert
2015-06-26 8:19 ` Yang Hongyang
2015-08-04 5:20 ` Amit Shah
2015-08-05 12:21 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 02/42] Provide runtime Target page information Dr. David Alan Gilbert (git)
2015-06-17 11:43 ` Juan Quintela
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 03/42] Init page sizes in qtest Dr. David Alan Gilbert (git)
2015-06-17 11:49 ` Juan Quintela
2015-07-06 6:14 ` Amit Shah
2015-08-04 5:23 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 04/42] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2015-06-17 11:54 ` Juan Quintela
2015-07-10 8:36 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 05/42] Add qemu_get_buffer_less_copy to avoid copies some of the time Dr. David Alan Gilbert (git)
2015-06-17 11:57 ` Juan Quintela
2015-06-17 12:33 ` Dr. David Alan Gilbert
2015-07-13 9:08 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 06/42] Add wrapper for setting blocking status on a QEMUFile Dr. David Alan Gilbert (git)
2015-06-17 11:59 ` Juan Quintela
2015-06-17 12:34 ` Dr. David Alan Gilbert
2015-06-17 12:57 ` Juan Quintela
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 07/42] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2015-06-17 12:17 ` Juan Quintela
2015-06-19 17:04 ` Dr. David Alan Gilbert
2015-07-13 10:15 ` Juan Quintela
2015-07-13 9:12 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 08/42] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2015-06-17 12:18 ` Juan Quintela
2015-07-13 9:13 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 09/42] Rename save_live_complete to save_live_complete_precopy Dr. David Alan Gilbert (git)
2015-06-17 12:20 ` Juan Quintela
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 10/42] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2015-06-17 12:23 ` Juan Quintela
2015-06-17 17:07 ` Dr. David Alan Gilbert
2015-07-13 10:12 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 11/42] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2015-06-17 12:28 ` Juan Quintela
2015-06-19 17:18 ` Dr. David Alan Gilbert
2015-07-13 12:37 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 12/42] Migration commands Dr. David Alan Gilbert (git)
2015-06-17 12:31 ` Juan Quintela
2015-06-19 17:38 ` Dr. David Alan Gilbert
2015-07-13 12:45 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 13/42] Return path: Control commands Dr. David Alan Gilbert (git)
2015-06-17 12:49 ` Juan Quintela
2015-06-23 18:57 ` Dr. David Alan Gilbert
2015-07-13 12:55 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 14/42] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2015-06-17 16:30 ` Juan Quintela
2015-06-19 18:42 ` Dr. David Alan Gilbert
2015-07-01 9:29 ` Juan Quintela
2015-08-06 12:18 ` Dr. David Alan Gilbert
2015-07-15 7:31 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 15/42] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2015-07-13 10:29 ` Juan Quintela
2015-08-18 10:23 ` Dr. David Alan Gilbert
2015-07-15 7:50 ` Amit Shah
2015-07-16 11:32 ` Dr. David Alan Gilbert
2015-08-05 8:06 ` zhanghailiang
2015-08-18 10:45 ` Dr. David Alan Gilbert
2015-08-18 11:29 ` zhanghailiang
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 16/42] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2015-07-13 10:33 ` Juan Quintela
2015-07-15 9:34 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 17/42] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2015-06-16 15:43 ` Eric Blake
2015-06-16 15:58 ` Dr. David Alan Gilbert
2015-07-15 9:39 ` Amit Shah
2015-07-13 10:35 ` Juan Quintela
2015-07-15 9:40 ` Amit Shah
2015-06-16 10:26 ` Dr. David Alan Gilbert (git) [this message]
2015-07-13 11:02 ` [Qemu-devel] [PATCH v7 18/42] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Juan Quintela
2015-07-20 10:13 ` Amit Shah
2015-08-26 14:48 ` Dr. David Alan Gilbert
2015-07-20 10:06 ` Amit Shah
2015-07-27 9:55 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 19/42] MIG_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2015-07-13 11:07 ` Juan Quintela
2015-07-21 6:11 ` Amit Shah
2015-07-27 17:28 ` Dr. David Alan Gilbert
2015-08-04 5:27 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 20/42] Modify save_live_pending for postcopy Dr. David Alan Gilbert (git)
2015-07-13 11:12 ` Juan Quintela
2015-07-31 16:13 ` Dr. David Alan Gilbert
2015-07-21 6:17 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 21/42] postcopy: OS support test Dr. David Alan Gilbert (git)
2015-07-13 11:20 ` Juan Quintela
2015-07-13 16:31 ` Dr. David Alan Gilbert
2015-07-21 7:29 ` Amit Shah
2015-07-27 17:38 ` Dr. David Alan Gilbert
2015-08-04 5:28 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 22/42] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2015-07-13 11:23 ` Juan Quintela
2015-07-13 17:13 ` Dr. David Alan Gilbert
2015-07-13 18:07 ` Juan Quintela
2015-07-21 7:40 ` Amit Shah
2015-09-24 9:59 ` Dr. David Alan Gilbert
2015-09-24 14:20 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 23/42] MIGRATION_STATUS_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2015-07-13 11:27 ` Juan Quintela
2015-07-13 15:53 ` Dr. David Alan Gilbert
2015-07-13 16:26 ` Juan Quintela
2015-07-13 16:48 ` Dr. David Alan Gilbert
2015-07-13 18:05 ` Juan Quintela
2015-07-21 10:33 ` Amit Shah
2015-09-23 17:04 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 24/42] Add qemu_savevm_state_complete_postcopy Dr. David Alan Gilbert (git)
2015-07-13 11:35 ` Juan Quintela
2015-07-13 15:33 ` Dr. David Alan Gilbert
2015-07-21 10:42 ` Amit Shah
2015-07-27 17:58 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 25/42] Postcopy: Maintain sentmap and calculate discard Dr. David Alan Gilbert (git)
2015-07-13 11:47 ` Juan Quintela
2015-09-15 17:01 ` Dr. David Alan Gilbert
2015-07-21 11:36 ` Amit Shah
2015-07-31 16:51 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 26/42] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2015-07-13 12:04 ` Juan Quintela
2015-09-23 19:06 ` Dr. David Alan Gilbert
2015-07-22 6:19 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 27/42] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2015-07-13 12:10 ` Juan Quintela
2015-07-13 17:36 ` Dr. David Alan Gilbert
2015-07-23 5:22 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 28/42] Postcopy: Postcopy startup in migration thread Dr. David Alan Gilbert (git)
2015-07-13 12:56 ` Juan Quintela
2015-07-13 17:56 ` Dr. David Alan Gilbert
2015-07-13 18:09 ` Juan Quintela
2015-09-23 17:56 ` Dr. David Alan Gilbert
2015-07-23 5:53 ` Amit Shah
2015-07-23 5:55 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 29/42] Postcopy end in migration_thread Dr. David Alan Gilbert (git)
2015-07-13 13:15 ` Juan Quintela
2015-07-23 6:41 ` Amit Shah
2015-08-04 11:31 ` Dr. David Alan Gilbert
2015-07-23 6:41 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 30/42] Page request: Add MIG_RP_MSG_REQ_PAGES reverse command Dr. David Alan Gilbert (git)
2015-07-13 13:24 ` Juan Quintela
2015-08-06 14:15 ` Dr. David Alan Gilbert
2015-07-23 6:50 ` Amit Shah
2015-08-06 14:21 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 31/42] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2015-07-14 9:18 ` Juan Quintela
2015-08-06 10:45 ` Dr. David Alan Gilbert
2015-10-20 10:29 ` Juan Quintela
2015-07-23 12:23 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 32/42] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2015-07-14 9:40 ` Juan Quintela
2015-09-16 18:36 ` Dr. David Alan Gilbert
2015-07-27 6:05 ` Amit Shah
2015-09-16 18:48 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 33/42] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2015-07-14 10:05 ` Juan Quintela
2015-07-27 6:11 ` Amit Shah
2015-09-23 16:45 ` Dr. David Alan Gilbert
2015-07-27 6:11 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 34/42] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2015-07-14 12:34 ` Juan Quintela
2015-07-17 17:31 ` Dr. David Alan Gilbert
2015-07-27 7:39 ` Amit Shah
2015-08-06 11:22 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 35/42] Don't sync dirty bitmaps in postcopy Dr. David Alan Gilbert (git)
2015-07-14 12:36 ` Juan Quintela
2015-07-14 13:13 ` Dr. David Alan Gilbert
2015-07-27 7:43 ` Amit Shah
2015-07-31 9:50 ` Dr. David Alan Gilbert
2015-08-04 5:46 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 36/42] Host page!=target page: Cleanup bitmaps Dr. David Alan Gilbert (git)
2015-07-14 15:01 ` Juan Quintela
2015-07-31 15:53 ` Dr. David Alan Gilbert
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 37/42] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2015-07-14 15:10 ` Juan Quintela
2015-07-14 15:15 ` Dr. David Alan Gilbert
2015-07-14 15:25 ` Juan Quintela
2015-07-27 14:29 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 38/42] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2015-07-14 15:12 ` Juan Quintela
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 39/42] postcopy: Wire up loadvm_postcopy_handle_ commands Dr. David Alan Gilbert (git)
2015-07-14 15:14 ` Juan Quintela
2015-07-28 5:53 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 40/42] End of migration for postcopy Dr. David Alan Gilbert (git)
2015-07-14 15:15 ` Juan Quintela
2015-07-28 5:55 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 41/42] Disable mlock around incoming postcopy Dr. David Alan Gilbert (git)
2015-07-14 15:22 ` Juan Quintela
2015-07-28 6:02 ` Amit Shah
2015-07-28 11:32 ` Juan Quintela
2015-08-06 14:55 ` Dr. David Alan Gilbert
2015-08-07 3:05 ` zhanghailiang
2015-09-24 10:36 ` Dr. David Alan Gilbert
2015-07-28 6:02 ` Amit Shah
2015-06-16 10:26 ` [Qemu-devel] [PATCH v7 42/42] Inhibit ballooning during postcopy Dr. David Alan Gilbert (git)
2015-07-14 15:24 ` Juan Quintela
2015-07-28 6:15 ` Amit Shah
2015-07-28 9:08 ` Dr. David Alan Gilbert
2015-07-28 10:01 ` Amit Shah
2015-07-28 11:16 ` Dr. David Alan Gilbert
2015-07-28 6:21 ` [Qemu-devel] [PATCH v7 00/42] Postcopy implementation Amit Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434450415-11339-19-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=amit.shah@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=liang.z.li@intel.com \
--cc=luis@cs.umu.se \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).