From: Laszlo Ersek <lersek@redhat.com>
To: qemu-devel@nongnu.org, lersek@redhat.com
Cc: John Snow <jsnow@redhat.com>, Jan Tomko <jtomko@redhat.com>,
Markus Armbruster <armbru@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [RFC 1/2] hw/i386/pc: factor out pc_cmos_init_floppy()
Date: Sat, 20 Jun 2015 04:43:47 +0200 [thread overview]
Message-ID: <1434768228-9167-2-git-send-email-lersek@redhat.com> (raw)
In-Reply-To: <1434768228-9167-1-git-send-email-lersek@redhat.com>
Extract the pc_cmos_init_floppy() function from pc_cmos_init(). The
function sets two RTC registers: floppy drive types (0x10), overwriting
the earlier value in there), and REG_EQUIPMENT_BYTE (0x14), setting bits
in the prior value.
Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
hw/i386/pc.c | 67 ++++++++++++++++++++++++++++++++++--------------------------
1 file changed, 38 insertions(+), 29 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 3f0d435..1ca0cdd 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -294,6 +294,42 @@ static void pc_boot_set(void *opaque, const char *boot_device, Error **errp)
set_boot_dev(opaque, boot_device, errp);
}
+static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy)
+{
+ int val, nb, i;
+ FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
+
+ /* floppy type */
+ if (floppy) {
+ for (i = 0; i < 2; i++) {
+ fd_type[i] = isa_fdc_get_drive_type(floppy, i);
+ }
+ }
+ val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
+ cmos_get_fd_drive_type(fd_type[1]);
+ rtc_set_memory(rtc_state, 0x10, val);
+
+ val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE);
+ nb = 0;
+ if (fd_type[0] < FDRIVE_DRV_NONE) {
+ nb++;
+ }
+ if (fd_type[1] < FDRIVE_DRV_NONE) {
+ nb++;
+ }
+ switch (nb) {
+ case 0:
+ break;
+ case 1:
+ val |= 0x01; /* 1 drive, ready for boot */
+ break;
+ case 2:
+ val |= 0x41; /* 2 drives, ready for boot */
+ break;
+ }
+ rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val);
+}
+
typedef struct pc_cmos_init_late_arg {
ISADevice *rtc_state;
BusState *idebus[2];
@@ -344,8 +380,7 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
ISADevice *floppy, BusState *idebus0, BusState *idebus1,
ISADevice *s)
{
- int val, nb, i;
- FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
+ int val;
static pc_cmos_init_late_arg arg;
PCMachineState *pc_machine = PC_MACHINE(machine);
Error *local_err = NULL;
@@ -402,37 +437,11 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
exit(1);
}
- /* floppy type */
- if (floppy) {
- for (i = 0; i < 2; i++) {
- fd_type[i] = isa_fdc_get_drive_type(floppy, i);
- }
- }
- val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
- cmos_get_fd_drive_type(fd_type[1]);
- rtc_set_memory(s, 0x10, val);
-
val = 0;
- nb = 0;
- if (fd_type[0] < FDRIVE_DRV_NONE) {
- nb++;
- }
- if (fd_type[1] < FDRIVE_DRV_NONE) {
- nb++;
- }
- switch (nb) {
- case 0:
- break;
- case 1:
- val |= 0x01; /* 1 drive, ready for boot */
- break;
- case 2:
- val |= 0x41; /* 2 drives, ready for boot */
- break;
- }
val |= 0x02; /* FPU is there */
val |= 0x04; /* PS/2 mouse installed */
rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
+ pc_cmos_init_floppy(s, floppy);
/* hard drives */
arg.rtc_state = s;
--
1.8.3.1
next prev parent reply other threads:[~2015-06-20 2:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-20 2:43 [Qemu-devel] [RFC 0/2] update CMOS for single hand-created ISA-FDC Laszlo Ersek
2015-06-20 2:43 ` Laszlo Ersek [this message]
2015-06-20 2:43 ` [Qemu-devel] [RFC 2/2] hw/i386/pc: reflect an explicitly created, sole FDC in the CMOS Laszlo Ersek
2015-06-20 9:54 ` Markus Armbruster
2015-06-22 11:01 ` [Qemu-devel] [RFC 0/2] update CMOS for single hand-created ISA-FDC Ján Tomko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434768228-9167-2-git-send-email-lersek@redhat.com \
--to=lersek@redhat.com \
--cc=armbru@redhat.com \
--cc=jsnow@redhat.com \
--cc=jtomko@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).