qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: John Snow <jsnow@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, pbonzini@redhat.com,
	John Snow <jsnow@redhat.com>,
	qemu-devel@nongnu.org, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH 03/16] ahci: assert is_ncq for process_ncq
Date: Mon, 22 Jun 2015 20:21:02 -0400	[thread overview]
Message-ID: <1435018875-22527-4-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1435018875-22527-1-git-send-email-jsnow@redhat.com>

We already checked this in the handle_cmd phase, so just
change this to an assertion and simplify the error logic.

(Also, fix the switch indent, because checkpatch.pl yelled.)
((Sorry for churn.))

Signed-off-by: John Snow <jsnow@redhat.com>
---
 hw/ide/ahci.c | 60 ++++++++++++++++++++++++++---------------------------------
 1 file changed, 26 insertions(+), 34 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index ce99e81..2d70104 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -987,6 +987,7 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
     NCQTransferState *ncq_tfs = &ad->ncq_tfs[tag];
     size_t size;
 
+    g_assert(is_ncq(ncq_fis->command));
     if (ncq_tfs->used) {
         /* error - already in use */
         fprintf(stderr, "%s: tag %d already used\n", __FUNCTION__, tag);
@@ -1049,44 +1050,35 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
             ide_state->nb_sectors - 1);
 
     switch (ncq_tfs->cmd) {
-        case READ_FPDMA_QUEUED:
-            DPRINTF(port, "NCQ reading %d sectors from LBA %"PRId64", "
-                    "tag %d\n",
-                    ncq_tfs->sector_count, ncq_tfs->lba, ncq_tfs->tag);
+    case READ_FPDMA_QUEUED:
+        DPRINTF(port, "NCQ reading %d sectors from LBA %"PRId64", tag %d\n",
+                ncq_tfs->sector_count, ncq_tfs->lba, ncq_tfs->tag);
 
-            DPRINTF(port, "tag %d aio read %"PRId64"\n",
-                    ncq_tfs->tag, ncq_tfs->lba);
+        DPRINTF(port, "tag %d aio read %"PRId64"\n",
+                ncq_tfs->tag, ncq_tfs->lba);
 
-            dma_acct_start(ide_state->blk, &ncq_tfs->acct,
-                           &ncq_tfs->sglist, BLOCK_ACCT_READ);
-            ncq_tfs->aiocb = dma_blk_read(ide_state->blk,
-                                          &ncq_tfs->sglist, ncq_tfs->lba,
-                                          ncq_cb, ncq_tfs);
-            break;
-        case WRITE_FPDMA_QUEUED:
-            DPRINTF(port, "NCQ writing %d sectors to LBA %"PRId64", tag %d\n",
-                    ncq_tfs->sector_count, ncq_tfs->lba, ncq_tfs->tag);
+        dma_acct_start(ide_state->blk, &ncq_tfs->acct,
+                       &ncq_tfs->sglist, BLOCK_ACCT_READ);
+        ncq_tfs->aiocb = dma_blk_read(ide_state->blk, &ncq_tfs->sglist,
+                                      ncq_tfs->lba, ncq_cb, ncq_tfs);
+        break;
+    case WRITE_FPDMA_QUEUED:
+        DPRINTF(port, "NCQ writing %d sectors to LBA %"PRId64", tag %d\n",
+                ncq_tfs->sector_count, ncq_tfs->lba, ncq_tfs->tag);
 
-            DPRINTF(port, "tag %d aio write %"PRId64"\n",
-                    ncq_tfs->tag, ncq_tfs->lba);
+        DPRINTF(port, "tag %d aio write %"PRId64"\n",
+                ncq_tfs->tag, ncq_tfs->lba);
 
-            dma_acct_start(ide_state->blk, &ncq_tfs->acct,
-                           &ncq_tfs->sglist, BLOCK_ACCT_WRITE);
-            ncq_tfs->aiocb = dma_blk_write(ide_state->blk,
-                                           &ncq_tfs->sglist, ncq_tfs->lba,
-                                           ncq_cb, ncq_tfs);
-            break;
-        default:
-            if (is_ncq(cmd_fis[2])) {
-                DPRINTF(port,
-                        "error: unsupported NCQ command (0x%02x) received\n",
-                        cmd_fis[2]);
-            } else {
-                DPRINTF(port,
-                        "error: tried to process non-NCQ command as NCQ\n");
-            }
-            qemu_sglist_destroy(&ncq_tfs->sglist);
-            ncq_err(ncq_tfs);
+        dma_acct_start(ide_state->blk, &ncq_tfs->acct,
+                       &ncq_tfs->sglist, BLOCK_ACCT_WRITE);
+        ncq_tfs->aiocb = dma_blk_write(ide_state->blk, &ncq_tfs->sglist,
+                                       ncq_tfs->lba, ncq_cb, ncq_tfs);
+        break;
+    default:
+        DPRINTF(port, "error: unsupported NCQ command (0x%02x) received\n",
+                ncq_tfs->cmd);
+        qemu_sglist_destroy(&ncq_tfs->sglist);
+        ncq_err(ncq_tfs);
     }
 }
 
-- 
2.1.0

  parent reply	other threads:[~2015-06-23  0:21 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-23  0:20 [Qemu-devel] [PATCH 00/16] ahci: ncq cleanup, part 2 John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 01/16] ide: add limit to .prepare_buf() John Snow
2015-06-26 14:32   ` Stefan Hajnoczi
2015-06-26 18:16     ` John Snow
2015-06-29 13:34       ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-06-29 18:52         ` John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 02/16] ahci: stash ncq command John Snow
2015-06-23  0:21 ` John Snow [this message]
2015-06-23  0:21 ` [Qemu-devel] [PATCH 04/16] ahci: refactor process_ncq_command John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 05/16] ahci: factor ncq_finish out of ncq_cb John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 06/16] ahci: record ncq failures John Snow
2015-06-26 15:35   ` Stefan Hajnoczi
2015-06-26 18:27     ` John Snow
2015-06-29 14:10       ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-06-29 14:24       ` Stefan Hajnoczi
2015-06-29 15:42         ` John Snow
2015-06-29 15:47           ` John Snow
2015-06-30 13:56             ` Stefan Hajnoczi
2015-06-23  0:21 ` [Qemu-devel] [PATCH 07/16] ahci: kick NCQ queue John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 08/16] ahci: correct types in NCQTransferState John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 09/16] ahci: correct ncq sector count John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 10/16] qtest/ahci: halted NCQ test John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 11/16] ahci: add cmd header to ncq transfer state John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 12/16] ahci: ncq migration John Snow
2015-06-26 15:48   ` Stefan Hajnoczi
2015-06-26 16:46     ` John Snow
2015-06-29 14:25       ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-06-23  0:21 ` [Qemu-devel] [PATCH 13/16] ahci: add get_cmd_header helper John Snow
2015-06-26 15:51   ` Stefan Hajnoczi
2015-06-26 18:32     ` John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 14/16] ahci: Do not map cmd_fis to generate response John Snow
2015-06-26 15:59   ` Stefan Hajnoczi
2015-06-26 17:31     ` John Snow
2015-06-29 14:51       ` Stefan Hajnoczi
2015-06-29 15:07         ` John Snow
2015-06-30 14:50           ` Stefan Hajnoczi
2015-06-23  0:21 ` [Qemu-devel] [PATCH 15/16] qtest/ahci: halted ncq migration test John Snow
2015-06-23  0:21 ` [Qemu-devel] [PATCH 16/16] ahci: fix sdb fis semantics John Snow
2015-06-26 16:11   ` Stefan Hajnoczi
2015-06-26 17:36     ` John Snow
2015-06-29 14:52       ` [Qemu-devel] [Qemu-block] " Stefan Hajnoczi
2015-06-26 16:11 ` [Qemu-devel] [PATCH 00/16] ahci: ncq cleanup, part 2 Stefan Hajnoczi
2015-06-26 19:27   ` John Snow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435018875-22527-4-git-send-email-jsnow@redhat.com \
    --to=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).