qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Dimitris Aragiorgis <dimara@arrikto.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 10/15] raw-posix: DPRINTF instead of DEBUG_BLOCK_PRINT
Date: Wed, 24 Jun 2015 16:28:01 +0100	[thread overview]
Message-ID: <1435159686-14817-11-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1435159686-14817-1-git-send-email-stefanha@redhat.com>

From: Dimitris Aragiorgis <dimara@arrikto.com>

Building the QEMU tools fails if we #define DEBUG_BLOCK inside
block/raw-posix.c. Here instead of adding qemu-log.o in block-obj-y
so that DEBUG_BLOCK_PRINT can be used, we substitute the latter with
a simple DPRINTF() (that does not cause bit-rot).

Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-4-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/raw-posix.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/block/raw-posix.c b/block/raw-posix.c
index b2097fc..23c4577 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -99,12 +99,18 @@
 //#define DEBUG_FLOPPY
 
 //#define DEBUG_BLOCK
-#if defined(DEBUG_BLOCK)
-#define DEBUG_BLOCK_PRINT(formatCstr, ...) do { if (qemu_log_enabled()) \
-    { qemu_log(formatCstr, ## __VA_ARGS__); qemu_log_flush(); } } while (0)
+
+#ifdef DEBUG_BLOCK
+# define DEBUG_BLOCK_PRINT 1
 #else
-#define DEBUG_BLOCK_PRINT(formatCstr, ...)
+# define DEBUG_BLOCK_PRINT 0
 #endif
+#define DPRINTF(fmt, ...) \
+do { \
+    if (DEBUG_BLOCK_PRINT) { \
+        printf(fmt, ## __VA_ARGS__); \
+    } \
+} while (0)
 
 /* OS X does not have O_DSYNC */
 #ifndef O_DSYNC
@@ -1020,6 +1026,7 @@ static ssize_t handle_aiocb_rw(RawPosixAIOData *aiocb)
 static int xfs_write_zeroes(BDRVRawState *s, int64_t offset, uint64_t bytes)
 {
     struct xfs_flock64 fl;
+    int err;
 
     memset(&fl, 0, sizeof(fl));
     fl.l_whence = SEEK_SET;
@@ -1027,8 +1034,9 @@ static int xfs_write_zeroes(BDRVRawState *s, int64_t offset, uint64_t bytes)
     fl.l_len = bytes;
 
     if (xfsctl(NULL, s->fd, XFS_IOC_ZERO_RANGE, &fl) < 0) {
-        DEBUG_BLOCK_PRINT("cannot write zero range (%s)\n", strerror(errno));
-        return -errno;
+        err = errno;
+        DPRINTF("cannot write zero range (%s)\n", strerror(errno));
+        return -err;
     }
 
     return 0;
@@ -1037,6 +1045,7 @@ static int xfs_write_zeroes(BDRVRawState *s, int64_t offset, uint64_t bytes)
 static int xfs_discard(BDRVRawState *s, int64_t offset, uint64_t bytes)
 {
     struct xfs_flock64 fl;
+    int err;
 
     memset(&fl, 0, sizeof(fl));
     fl.l_whence = SEEK_SET;
@@ -1044,8 +1053,9 @@ static int xfs_discard(BDRVRawState *s, int64_t offset, uint64_t bytes)
     fl.l_len = bytes;
 
     if (xfsctl(NULL, s->fd, XFS_IOC_UNRESVSP64, &fl) < 0) {
-        DEBUG_BLOCK_PRINT("cannot punch hole (%s)\n", strerror(errno));
-        return -errno;
+        err = errno;
+        DPRINTF("cannot punch hole (%s)\n", strerror(errno));
+        return -err;
     }
 
     return 0;
-- 
2.4.3

  parent reply	other threads:[~2015-06-24 15:28 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-24 15:27 [Qemu-devel] [PULL 00/15] Block patches Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 01/15] block: Let bdrv_drain_all() to call aio_poll() for each AioContext Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 02/15] throttle: Check current timers before updating any_timer_armed[] Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 03/15] block-backend: Introduce blk_drain() Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 04/15] virtio-blk: Use blk_drain() to drain IO requests Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 05/15] util/hbitmap: Add an API to reset all set bits in hbitmap Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 06/15] vvfat: add a label option Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 07/15] nvme: Fix memleak in nvme_dma_read_prp Stefan Hajnoczi
2015-06-24 15:27 ` [Qemu-devel] [PULL 08/15] block: Use bdrv_is_sg() everywhere Stefan Hajnoczi
2015-06-24 15:28 ` [Qemu-devel] [PULL 09/15] Fix migration in case of scsi-generic Stefan Hajnoczi
2015-06-24 15:28 ` Stefan Hajnoczi [this message]
2015-06-24 15:28 ` [Qemu-devel] [PULL 11/15] raw-posix: Use DPRINTF for DEBUG_FLOPPY Stefan Hajnoczi
2015-06-24 15:28 ` [Qemu-devel] [PULL 12/15] raw-posix: Introduce hdev_is_sg() Stefan Hajnoczi
2015-06-24 15:28 ` [Qemu-devel] [PULL 13/15] iov: don't touch iov in iov_send_recv() Stefan Hajnoczi
2015-06-24 15:28 ` [Qemu-devel] [PULL 14/15] qemu-iotests: fix 051.out after qdev error message change Stefan Hajnoczi
2015-06-24 15:28 ` [Qemu-devel] [PULL 15/15] virito-blk: drop duplicate check Stefan Hajnoczi
2015-06-25 13:03 ` [Qemu-devel] [PULL 00/15] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435159686-14817-11-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=dimara@arrikto.com \
    --cc=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).