From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Subject: [Qemu-devel] [PULL 09/20] target-mips: refactor {D}LSA, {D}ALIGN, {D}BITSWAP
Date: Fri, 26 Jun 2015 11:25:13 +0100 [thread overview]
Message-ID: <1435314324-8755-10-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1435314324-8755-1-git-send-email-leon.alrae@imgtec.com>
From: Yongbok Kim <yongbok.kim@imgtec.com>
Refactor those instructions in order to reuse them for microMIPS32
Release 6.
Rearrange gen_move_low32().
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
target-mips/translate.c | 166 +++++++++++++++++++++++++++++-------------------
1 file changed, 99 insertions(+), 67 deletions(-)
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 146ab25..cbe348b 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -1724,6 +1724,15 @@ static target_long addr_add(DisasContext *ctx, target_long base,
return sum;
}
+static inline void gen_move_low32(TCGv ret, TCGv_i64 arg)
+{
+#if defined(TARGET_MIPS64)
+ tcg_gen_ext32s_tl(ret, arg);
+#else
+ tcg_gen_trunc_i64_tl(ret, arg);
+#endif
+}
+
static inline void check_cp0_enabled(DisasContext *ctx)
{
if (unlikely(!(ctx->hflags & MIPS_HFLAG_CP0)))
@@ -4846,17 +4855,94 @@ static void gen_bshfl (DisasContext *ctx, uint32_t op2, int rt, int rd)
tcg_temp_free(t0);
}
-#ifndef CONFIG_USER_ONLY
-/* CP0 (MMU and control) */
-static inline void gen_move_low32(TCGv ret, TCGv_i64 arg)
+static void gen_lsa(DisasContext *ctx, int opc, int rd, int rs, int rt,
+ int imm2)
+{
+ TCGv t0;
+ TCGv t1;
+ if (rd == 0) {
+ /* Treat as NOP. */
+ return;
+ }
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+ gen_load_gpr(t0, rs);
+ gen_load_gpr(t1, rt);
+ tcg_gen_shli_tl(t0, t0, imm2 + 1);
+ tcg_gen_add_tl(cpu_gpr[rd], t0, t1);
+ if (opc == OPC_LSA) {
+ tcg_gen_ext32s_tl(cpu_gpr[rd], cpu_gpr[rd]);
+ }
+
+ tcg_temp_free(t1);
+ tcg_temp_free(t0);
+
+ return;
+}
+
+static void gen_align(DisasContext *ctx, int opc, int rd, int rs, int rt,
+ int bp)
{
+ TCGv t0;
+ if (rd == 0) {
+ /* Treat as NOP. */
+ return;
+ }
+ t0 = tcg_temp_new();
+ gen_load_gpr(t0, rt);
+ if (bp == 0) {
+ tcg_gen_mov_tl(cpu_gpr[rd], t0);
+ } else {
+ TCGv t1 = tcg_temp_new();
+ gen_load_gpr(t1, rs);
+ switch (opc) {
+ case OPC_ALIGN:
+ {
+ TCGv_i64 t2 = tcg_temp_new_i64();
+ tcg_gen_concat_tl_i64(t2, t1, t0);
+ tcg_gen_shri_i64(t2, t2, 8 * (4 - bp));
+ gen_move_low32(cpu_gpr[rd], t2);
+ tcg_temp_free_i64(t2);
+ }
+ break;
#if defined(TARGET_MIPS64)
- tcg_gen_ext32s_tl(ret, arg);
-#else
- tcg_gen_trunc_i64_tl(ret, arg);
+ case OPC_DALIGN:
+ tcg_gen_shli_tl(t0, t0, 8 * bp);
+ tcg_gen_shri_tl(t1, t1, 8 * (8 - bp));
+ tcg_gen_or_tl(cpu_gpr[rd], t1, t0);
+ break;
#endif
+ }
+ tcg_temp_free(t1);
+ }
+
+ tcg_temp_free(t0);
+}
+
+static void gen_bitswap(DisasContext *ctx, int opc, int rd, int rt)
+{
+ TCGv t0;
+ if (rd == 0) {
+ /* Treat as NOP. */
+ return;
+ }
+ t0 = tcg_temp_new();
+ gen_load_gpr(t0, rt);
+ switch (opc) {
+ case OPC_BITSWAP:
+ gen_helper_bitswap(cpu_gpr[rd], t0);
+ break;
+#if defined(TARGET_MIPS64)
+ case OPC_DBITSWAP:
+ gen_helper_dbitswap(cpu_gpr[rd], t0);
+ break;
+#endif
+ }
+ tcg_temp_free(t0);
}
+#ifndef CONFIG_USER_ONLY
+/* CP0 (MMU and control) */
static inline void gen_mthc0_entrylo(TCGv arg, target_ulong off)
{
TCGv_i64 t0 = tcg_temp_new_i64();
@@ -16442,18 +16528,7 @@ static void decode_opc_special_r6(CPUMIPSState *env, DisasContext *ctx)
op1 = MASK_SPECIAL(ctx->opcode);
switch (op1) {
case OPC_LSA:
- if (rd != 0) {
- int imm2 = extract32(ctx->opcode, 6, 3);
- TCGv t0 = tcg_temp_new();
- TCGv t1 = tcg_temp_new();
- gen_load_gpr(t0, rs);
- gen_load_gpr(t1, rt);
- tcg_gen_shli_tl(t0, t0, imm2 + 1);
- tcg_gen_add_tl(t0, t0, t1);
- tcg_gen_ext32s_tl(cpu_gpr[rd], t0);
- tcg_temp_free(t1);
- tcg_temp_free(t0);
- }
+ gen_lsa(ctx, op1, rd, rs, rt, extract32(ctx->opcode, 6, 2));
break;
case OPC_MULT ... OPC_DIVU:
op2 = MASK_R6_MULDIV(ctx->opcode);
@@ -16502,17 +16577,7 @@ static void decode_opc_special_r6(CPUMIPSState *env, DisasContext *ctx)
#if defined(TARGET_MIPS64)
case OPC_DLSA:
check_mips_64(ctx);
- if (rd != 0) {
- int imm2 = extract32(ctx->opcode, 6, 3);
- TCGv t0 = tcg_temp_new();
- TCGv t1 = tcg_temp_new();
- gen_load_gpr(t0, rs);
- gen_load_gpr(t1, rt);
- tcg_gen_shli_tl(t0, t0, imm2 + 1);
- tcg_gen_add_tl(cpu_gpr[rd], t0, t1);
- tcg_temp_free(t1);
- tcg_temp_free(t0);
- }
+ gen_lsa(ctx, op1, rd, rs, rt, extract32(ctx->opcode, 6, 2));
break;
case R6_OPC_DCLO:
case R6_OPC_DCLZ:
@@ -16936,35 +17001,15 @@ static void decode_opc_special3_r6(CPUMIPSState *env, DisasContext *ctx)
/* Treat as NOP. */
break;
}
- TCGv t0 = tcg_temp_new();
- gen_load_gpr(t0, rt);
-
op2 = MASK_BSHFL(ctx->opcode);
switch (op2) {
case OPC_ALIGN ... OPC_ALIGN_END:
- sa &= 3;
- if (sa == 0) {
- tcg_gen_mov_tl(cpu_gpr[rd], t0);
- } else {
- TCGv t1 = tcg_temp_new();
- TCGv_i64 t2 = tcg_temp_new_i64();
- gen_load_gpr(t1, rs);
- tcg_gen_concat_tl_i64(t2, t1, t0);
- tcg_gen_shri_i64(t2, t2, 8 * (4 - sa));
-#if defined(TARGET_MIPS64)
- tcg_gen_ext32s_i64(cpu_gpr[rd], t2);
-#else
- tcg_gen_trunc_i64_i32(cpu_gpr[rd], t2);
-#endif
- tcg_temp_free_i64(t2);
- tcg_temp_free(t1);
- }
+ gen_align(ctx, OPC_ALIGN, rd, rs, rt, sa & 3);
break;
case OPC_BITSWAP:
- gen_helper_bitswap(cpu_gpr[rd], t0);
+ gen_bitswap(ctx, op2, rd, rt);
break;
}
- tcg_temp_free(t0);
}
break;
#if defined(TARGET_MIPS64)
@@ -16981,29 +17026,16 @@ static void decode_opc_special3_r6(CPUMIPSState *env, DisasContext *ctx)
/* Treat as NOP. */
break;
}
- TCGv t0 = tcg_temp_new();
- gen_load_gpr(t0, rt);
-
op2 = MASK_DBSHFL(ctx->opcode);
switch (op2) {
case OPC_DALIGN ... OPC_DALIGN_END:
- sa &= 7;
- if (sa == 0) {
- tcg_gen_mov_tl(cpu_gpr[rd], t0);
- } else {
- TCGv t1 = tcg_temp_new();
- gen_load_gpr(t1, rs);
- tcg_gen_shli_tl(t0, t0, 8 * sa);
- tcg_gen_shri_tl(t1, t1, 8 * (8 - sa));
- tcg_gen_or_tl(cpu_gpr[rd], t1, t0);
- tcg_temp_free(t1);
- }
+ gen_align(ctx, OPC_DALIGN, rd, rs, rt, sa & 7);
break;
case OPC_DBITSWAP:
- gen_helper_dbitswap(cpu_gpr[rd], t0);
+ gen_bitswap(ctx, op2, rd, rt);
break;
}
- tcg_temp_free(t0);
+
}
break;
#endif
--
2.1.0
next prev parent reply other threads:[~2015-06-26 10:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-26 10:25 [Qemu-devel] [PULL 00/20] target-mips queue Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 01/20] include/softmmu-semi.h: Make semihosting support 64-bit clean Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 02/20] hw/mips: Do not clear BEV for MIPS malta kernel load Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 03/20] target-mips: remove identical code in different branch Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 04/20] target-mips: add Unified Hosting Interface (UHI) support Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 05/20] target-mips: convert host to MIPS errno values when required Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 06/20] target-mips: fix {RD, WR}PGPR in microMIPS Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 07/20] target-mips: add microMIPS TLBINV, TLBINVF Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 08/20] target-mips: remove an unused argument Leon Alrae
2015-06-26 10:25 ` Leon Alrae [this message]
2015-06-26 10:25 ` [Qemu-devel] [PULL 10/20] target-mips: rearrange gen_compute_compact_branch Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 11/20] target-mips: raise RI exceptions when FIR.PS = 0 Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 12/20] target-mips: signal RI for removed instructions in microMIPS R6 Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 13/20] target-mips: add microMIPS32 R6 opcode enum Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 14/20] target-mips: microMIPS32 R6 branches and jumps Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 15/20] target-mips: microMIPS32 R6 POOL32A{XF} instructions Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 16/20] target-mips: microMIPS32 R6 POOL32F instructions Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 17/20] target-mips: microMIPS32 R6 POOL32{I, C} instructions Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 18/20] target-mips: microMIPS32 R6 Major instructions Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 19/20] target-mips: microMIPS32 R6 POOL16{A, C} instructions Leon Alrae
2015-06-26 10:25 ` [Qemu-devel] [PULL 20/20] target-mips: add mips32r6-generic CPU definition Leon Alrae
2015-06-26 12:13 ` [Qemu-devel] [PULL 00/20] target-mips queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435314324-8755-10-git-send-email-leon.alrae@imgtec.com \
--to=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
--cc=yongbok.kim@imgtec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).