[Qemu-devel] [PULL 0/7] target-arm queue

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

target-arm queue: a few new features, but all minor stuff.

thanks
-- PMM


The following changes since commit ccb0c7e122db72d3a5da798c6414d4912bba828f:

  Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150626' into staging (2015-06-26 11:32:58 +0100)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150626

for you to fetch changes up to 4e2c0b2a4ab810c8989e181a010e75aeaa1c55f3:

  hw/arm/virt: Make block devices default to virtio (2015-06-26 14:22:37 +0100)

----------------------------------------------------------------
target-arm queue:
 * Change the virt board's default interface type for block devices to virtio
 * Improve some error messages that will now be triggered by some incorrect
   but previously worked-by-accident command lines
 * Print ELR if we're doing debug logging of AArch64 exception entry
 * Handle the "completely empty semihosting commandline" correctly for
   softmmu (we already did for linux-user)
 * Add GICv2m description to ACPI tables for virt board
 * Fix some incorrect table revision entries in virt board ACPI tables

----------------------------------------------------------------
Liviu Ionescu (1):
      target-arm: default empty semihosting cmdline

Peter Maydell (3):
      qdev-properties-system: Change set_pointer's parse callback to use Error
      qdev-properties-system: Improve error message for drive assignment conflict
      hw/arm/virt: Make block devices default to virtio

Shannon Zhao (2):
      hw/arm/virt-acpi-build: Fix table revision and some comments
      hw/arm/virt-acpi-build: Add GICv2m description in ACPI MADT table

Soren Brinkmann (1):
      target-arm: A64: Print ELR when taking exceptions

 hw/arm/virt-acpi-build.c         | 22 ++++++++++++++++-----
 hw/arm/virt.c                    |  2 ++
 hw/core/qdev-properties-system.c | 42 +++++++++++++++++++++++++++-------------
 include/hw/acpi/acpi-defs.h      | 12 ++++++++++++
 target-arm/arm-semi.c            | 11 +++++++++--
 target-arm/helper-a64.c          |  2 ++
 6 files changed, 71 insertions(+), 20 deletions(-)

[Qemu-devel] [PULL 1/7] hw/arm/virt-acpi-build: Fix table revision and some comments

[Peter Maydell]

From: Shannon Zhao <shannon.zhao@linaro.org>

The table revision is not the ACPI spec version. Fix the wrong revision
and also some comments.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433820378-8336-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index d5a8b9c..40029dd 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -387,7 +387,7 @@ build_mcfg(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info)
     mcfg->allocation[0].end_bus_number = (memmap[VIRT_PCIE_ECAM].size
                                           / PCIE_MMCFG_SIZE_MIN) - 1;
 
-    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 5);
+    build_header(linker, table_data, (void *)mcfg, "MCFG", len, 1);
 }
 
 /* GTDT */
@@ -413,7 +413,7 @@ build_gtdt(GArray *table_data, GArray *linker)
 
     build_header(linker, table_data,
                  (void *)(table_data->data + gtdt_start), "GTDT",
-                 table_data->len - gtdt_start, 5);
+                 table_data->len - gtdt_start, 2);
 }
 
 /* MADT */
@@ -450,7 +450,7 @@ build_madt(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info,
 
     build_header(linker, table_data,
                  (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 5);
+                 table_data->len - madt_start, 3);
 }
 
 /* FADT */
@@ -507,7 +507,7 @@ build_dsdt(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info)
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
     build_header(linker, table_data,
         (void *)(table_data->data + table_data->len - dsdt->buf->len),
-        "DSDT", dsdt->buf->len, 5);
+        "DSDT", dsdt->buf->len, 2);
     free_aml_allocator();
 }
 
@@ -545,6 +545,7 @@ void virt_acpi_build(VirtGuestInfo *guest_info, AcpiBuildTables *tables)
      * FADT
      * GTDT
      * MADT
+     * MCFG
      * DSDT
      */
 
@@ -552,7 +553,7 @@ void virt_acpi_build(VirtGuestInfo *guest_info, AcpiBuildTables *tables)
     dsdt = tables_blob->len;
     build_dsdt(tables_blob, tables->linker, guest_info);
 
-    /* FADT MADT GTDT SPCR pointed to by RSDT */
+    /* FADT MADT GTDT MCFG SPCR pointed to by RSDT */
     acpi_add_table(table_offsets, tables_blob);
     build_fadt(tables_blob, tables->linker, dsdt);
 
-- 
1.9.1

[Qemu-devel] [PULL 2/7] hw/arm/virt-acpi-build: Add GICv2m description in ACPI MADT table

[Peter Maydell]

From: Shannon Zhao <shannon.zhao@linaro.org>

Add GICv2m description in ACPI MADT table, so guest can use MSI when
booting with ACPI.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Message-id: 1434676210-2276-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/virt-acpi-build.c    | 11 +++++++++++
 include/hw/acpi/acpi-defs.h | 12 ++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 40029dd..f365140 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -423,8 +423,10 @@ build_madt(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info,
 {
     int madt_start = table_data->len;
     const MemMapEntry *memmap = guest_info->memmap;
+    const int *irqmap = guest_info->irqmap;
     AcpiMultipleApicTable *madt;
     AcpiMadtGenericDistributor *gicd;
+    AcpiMadtGenericMsiFrame *gic_msi;
     int i;
 
     madt = acpi_data_push(table_data, sizeof *madt);
@@ -448,6 +450,15 @@ build_madt(GArray *table_data, GArray *linker, VirtGuestInfo *guest_info,
     gicd->length = sizeof(*gicd);
     gicd->base_address = memmap[VIRT_GIC_DIST].base;
 
+    gic_msi = acpi_data_push(table_data, sizeof *gic_msi);
+    gic_msi->type = ACPI_APIC_GENERIC_MSI_FRAME;
+    gic_msi->length = sizeof(*gic_msi);
+    gic_msi->gic_msi_frame_id = 0;
+    gic_msi->base_address = cpu_to_le64(memmap[VIRT_GIC_V2M].base);
+    gic_msi->flags = cpu_to_le32(1);
+    gic_msi->spi_count = cpu_to_le16(NUM_GICV2M_SPIS);
+    gic_msi->spi_base = cpu_to_le16(irqmap[VIRT_GIC_V2M] + ARM_SPI_BASE);
+
     build_header(linker, table_data,
                  (void *)(table_data->data + madt_start), "APIC",
                  table_data->len - madt_start, 3);
diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index 7b4bfb7..2b431e6 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -372,6 +372,18 @@ struct AcpiMadtGenericDistributor {
 
 typedef struct AcpiMadtGenericDistributor AcpiMadtGenericDistributor;
 
+struct AcpiMadtGenericMsiFrame {
+    ACPI_SUB_HEADER_DEF
+    uint16_t reserved;
+    uint32_t gic_msi_frame_id;
+    uint64_t base_address;
+    uint32_t flags;
+    uint16_t spi_count;
+    uint16_t spi_base;
+} QEMU_PACKED;
+
+typedef struct AcpiMadtGenericMsiFrame AcpiMadtGenericMsiFrame;
+
 /*
  * Generic Timer Description Table (GTDT)
  */
-- 
1.9.1

[Qemu-devel] [PULL 3/7] target-arm: default empty semihosting cmdline

[Peter Maydell]

From: Liviu Ionescu <ilg@livius.net>

If neither explicit semihosting args nor -kernel are used,
make SYS_GET_CMDLINE return an empty string.

Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: AC7B5AFC-06AE-4FAD-9852-B65708E80E09@livius.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/arm-semi.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/target-arm/arm-semi.c b/target-arm/arm-semi.c
index 74a67e9..a2a7369 100644
--- a/target-arm/arm-semi.c
+++ b/target-arm/arm-semi.c
@@ -436,12 +436,19 @@ uint32_t do_arm_semihosting(CPUARMState *env)
             size_t input_size;
             size_t output_size;
             int status = 0;
+#if !defined(CONFIG_USER_ONLY)
+            const char *cmdline;
+#endif
             GET_ARG(0);
             GET_ARG(1);
             input_size = arg1;
             /* Compute the size of the output string.  */
 #if !defined(CONFIG_USER_ONLY)
-            output_size = strlen(semihosting_get_cmdline()) + 1;
+            cmdline = semihosting_get_cmdline();
+            if (cmdline == NULL) {
+                cmdline = ""; /* Default to an empty line. */
+            }
+            output_size = strlen(cmdline) + 1; /* Count terminating 0. */
 #else
             unsigned int i;
 
@@ -472,7 +479,7 @@ uint32_t do_arm_semihosting(CPUARMState *env)
 
             /* Copy the command-line arguments.  */
 #if !defined(CONFIG_USER_ONLY)
-            pstrcpy(output_buffer, output_size, semihosting_get_cmdline());
+            pstrcpy(output_buffer, output_size, cmdline);
 #else
             if (output_size == 1) {
                 /* Empty command-line.  */
-- 
1.9.1

[Qemu-devel] [PULL 4/7] target-arm: A64: Print ELR when taking exceptions

[Peter Maydell]

From: Soren Brinkmann <soren.brinkmann@xilinx.com>

When taking an exception print the content of the exception link
register. This is useful especially for synchronous exceptions because
in that case this registers holds the address of the instruction that
generated the exception.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Message-id: 1435036655-16132-1-git-send-email-soren.brinkmann@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper-a64.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/target-arm/helper-a64.c b/target-arm/helper-a64.c
index e30af06..08c95a3 100644
--- a/target-arm/helper-a64.c
+++ b/target-arm/helper-a64.c
@@ -533,6 +533,8 @@ void aarch64_cpu_do_interrupt(CPUState *cs)
 
         env->condexec_bits = 0;
     }
+    qemu_log_mask(CPU_LOG_INT, "...with ELR 0x%" PRIx64 "\n",
+                  env->elr_el[new_el]);
 
     pstate_write(env, PSTATE_DAIF | new_mode);
     env->aarch64 = 1;
-- 
1.9.1

[Qemu-devel] [PULL 5/7] qdev-properties-system: Change set_pointer's parse callback to use Error

[Peter Maydell]

Instead of having set_pointer() call a parse callback which returns
an error number that we then convert to an Error string with
error_set_from_qdev_prop_error(), make the parse callback take an
Error** and set the error itself. This will allow parse routines
to provide more helpful error messages than the generic ones.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-2-git-send-email-peter.maydell@linaro.org
---
 hw/core/qdev-properties-system.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index aa794ca..c731bc6 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -35,15 +35,15 @@ static void get_pointer(Object *obj, Visitor *v, Property *prop,
 }
 
 static void set_pointer(Object *obj, Visitor *v, Property *prop,
-                        int (*parse)(DeviceState *dev, const char *str,
-                                     void **ptr),
+                        void (*parse)(DeviceState *dev, const char *str,
+                                      void **ptr, const char *propname,
+                                      Error **errp),
                         const char *name, Error **errp)
 {
     DeviceState *dev = DEVICE(obj);
     Error *local_err = NULL;
     void **ptr = qdev_get_prop_ptr(dev, prop);
     char *str;
-    int ret;
 
     if (dev->realized) {
         qdev_prop_set_after_realize(dev, name, errp);
@@ -60,26 +60,29 @@ static void set_pointer(Object *obj, Visitor *v, Property *prop,
         *ptr = NULL;
         return;
     }
-    ret = parse(dev, str, ptr);
-    error_set_from_qdev_prop_error(errp, ret, dev, prop, str);
+    parse(dev, str, ptr, prop->name, errp);
     g_free(str);
 }
 
 /* --- drive --- */
 
-static int parse_drive(DeviceState *dev, const char *str, void **ptr)
+static void parse_drive(DeviceState *dev, const char *str, void **ptr,
+                        const char *propname, Error **errp)
 {
     BlockBackend *blk;
 
     blk = blk_by_name(str);
     if (!blk) {
-        return -ENOENT;
+        error_setg(errp, "Property '%s.%s' can't find value '%s'",
+                   object_get_typename(OBJECT(dev)), propname, str);
+        return;
     }
     if (blk_attach_dev(blk, dev) < 0) {
-        return -EEXIST;
+        error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use",
+                  object_get_typename(OBJECT(dev)), propname, str);
+        return;
     }
     *ptr = blk;
-    return 0;
 }
 
 static void release_drive(Object *obj, const char *name, void *opaque)
@@ -121,17 +124,21 @@ PropertyInfo qdev_prop_drive = {
 
 /* --- character device --- */
 
-static int parse_chr(DeviceState *dev, const char *str, void **ptr)
+static void parse_chr(DeviceState *dev, const char *str, void **ptr,
+                      const char *propname, Error **errp)
 {
     CharDriverState *chr = qemu_chr_find(str);
     if (chr == NULL) {
-        return -ENOENT;
+        error_setg(errp, "Property '%s.%s' can't find value '%s'",
+                   object_get_typename(OBJECT(dev)), propname, str);
+        return;
     }
     if (qemu_chr_fe_claim(chr) != 0) {
-        return -EEXIST;
+        error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use",
+                  object_get_typename(OBJECT(dev)), propname, str);
+        return;
     }
     *ptr = chr;
-    return 0;
 }
 
 static void release_chr(Object *obj, const char *name, void *opaque)
-- 
1.9.1

[Qemu-devel] [PULL 6/7] qdev-properties-system: Improve error message for drive assignment conflict

[Peter Maydell]

If the user forgot if=none on their drive specification they're likely
to get an error message because the drive is assigned once automatically
by QEMU and once by the manual id=/drive= user command line specification.
Improve the error message produced in this case to explicitly guide the
user towards if=none.

We rephrase the "drive conflict but not for an if=something" error as
well to keep the wording in line.

The two cases that change are:

(1) Drive specified as to be auto-connected and also manually connected
(and the board does handle this if= type):

  qemu-system-x86_64 -nodefaults -display none \
     -drive if=scsi,file=tmp.qcow2,id=foo -device ide-hd,drive=foo

Previously:
  qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
  can't take value 'foo', it's in use

Now:
  qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
  use because it has been automatically connected to another device (did
  you need 'if=none' in the drive options?)

(2) Drive specified to be manually connected in two different ways:

  qemu-system-x86_64 -nodefaults -display none \
   -drive if=none,file=tmp.qcow2,id=foo -device ide-hd,drive=foo \
   -device ide-hd,drive=foo

Previously:
  qemu-system-x86_64: -device ide-hd,drive=foo: Property 'ide-hd.drive'
  can't take value 'foo', it's in use

Now:
  qemu-system-x86_64: -device ide-hd,drive=foo: Drive 'foo' is already in
  use by another device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-3-git-send-email-peter.maydell@linaro.org
---
 hw/core/qdev-properties-system.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c
index c731bc6..921e799 100644
--- a/hw/core/qdev-properties-system.c
+++ b/hw/core/qdev-properties-system.c
@@ -78,8 +78,17 @@ static void parse_drive(DeviceState *dev, const char *str, void **ptr,
         return;
     }
     if (blk_attach_dev(blk, dev) < 0) {
-        error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use",
-                  object_get_typename(OBJECT(dev)), propname, str);
+        DriveInfo *dinfo = blk_legacy_dinfo(blk);
+
+        if (dinfo->type != IF_NONE) {
+            error_setg(errp, "Drive '%s' is already in use because "
+                       "it has been automatically connected to another "
+                       "device (did you need 'if=none' in the drive options?)",
+                       str);
+        } else {
+            error_setg(errp, "Drive '%s' is already in use by another device",
+                       str);
+        }
         return;
     }
     *ptr = blk;
-- 
1.9.1

[Qemu-devel] [PULL 7/7] hw/arm/virt: Make block devices default to virtio

[Peter Maydell]

Now we have virtio-pci, we can make the virt board's default block
device type be IF_VIRTIO. This allows users to use simplified
command lines that don't have to explicitly create virtio-pci-blk
devices; the -hda &c very short options now also work.

This means we also need to set no_cdrom to avoid getting a
default cdrom device -- this is needed because the virtio-blk
device will fail if it is connected to a block backend with
no media, which is what the default cdrom device typically is.
Providing a cdrom with media via -cdrom will succeed, but silently
create a device with non-removable medium. this is probably
not really what the user wants, but is the best we can do now.

Note that this change means that some command lines which used
to work (by accident) will stop working. Where a drive was connected
manually to a device but without 'if=none' being specified, we
used to treat this as an IDE drive, which we would then not autoplug
because the board doesn't support IDE. Now we will treat it as a
virtio disk and autoplug it, which means the attempt to use the
drive manually will fail:
  qemu-system-arm: -drive file=img.qcow2,id=foo: Drive 'foo' is already
  in use because it has been automatically connected to another device
  (did you need 'if=none' in the drive options?)
The command line will have to be changed to include 'if=none', as the
error message suggests.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435068107-12594-4-git-send-email-peter.maydell@linaro.org
---
 hw/arm/virt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 4e78083a..4846892 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -956,6 +956,8 @@ static void virt_class_init(ObjectClass *oc, void *data)
     mc->init = machvirt_init;
     mc->max_cpus = 8;
     mc->has_dynamic_sysbus = true;
+    mc->block_default_type = IF_VIRTIO;
+    mc->no_cdrom = 1;
 }
 
 static const TypeInfo machvirt_info = {
-- 
1.9.1

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 26 June 2015 at 14:31, Peter Maydell <peter.maydell@linaro.org> wrote:
> target-arm queue: a few new features, but all minor stuff.
>
> thanks
> -- PMM
>
>
> The following changes since commit ccb0c7e122db72d3a5da798c6414d4912bba828f:
>
>   Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150626' into staging (2015-06-26 11:32:58 +0100)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150626
>
> for you to fetch changes up to 4e2c0b2a4ab810c8989e181a010e75aeaa1c55f3:
>
>   hw/arm/virt: Make block devices default to virtio (2015-06-26 14:22:37 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * Change the virt board's default interface type for block devices to virtio
>  * Improve some error messages that will now be triggered by some incorrect
>    but previously worked-by-accident command lines
>  * Print ELR if we're doing debug logging of AArch64 exception entry
>  * Handle the "completely empty semihosting commandline" correctly for
>    softmmu (we already did for linux-user)
>  * Add GICv2m description to ACPI tables for virt board
>  * Fix some incorrect table revision entries in virt board ACPI tables
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

A small set of arm bugfixes for rc0.



The following changes since commit 5853e92207193e967abf5e4c25b4a551c7604725:

  Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-20171107' into staging (2017-11-07 12:19:48 +0000)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20171107

for you to fetch changes up to 8a7348b5d62d7ea16807e6bea54b448a0184bb0f:

  hw/intc/arm_gicv3_its: Don't abort on table save failure (2017-11-07 13:03:52 +0000)

----------------------------------------------------------------
target-arm queue:
 * arm_gicv3_its: Don't abort on table save failure
 * arm_gicv3_its: Fix the VM termination in vm_change_state_handler()
 * translate.c: Fix usermode big-endian AArch32 LDREXD and STREXD
 * hw/arm: Mark the "fsl,imx31/25/6" devices with user_creatable = false
 * arm: implement cache/shareability attribute bits for PAR registers

----------------------------------------------------------------
Andrew Baumann (1):
      arm: implement cache/shareability attribute bits for PAR registers

Eric Auger (1):
      hw/intc/arm_gicv3_its: Don't abort on table save failure

Peter Maydell (1):
      translate.c: Fix usermode big-endian AArch32 LDREXD and STREXD

Shanker Donthineni (1):
      hw/intc/arm_gicv3_its: Fix the VM termination in vm_change_state_handler()

Thomas Huth (3):
      hw/arm: Mark the "fsl,imx6" device with user_creatable = false
      hw/arm: Mark the "fsl,imx25" device with user_creatable = false
      hw/arm: Mark the "fsl,imx31" device with user_creatable = false

 hw/arm/fsl-imx25.c          |   6 +-
 hw/arm/fsl-imx31.c          |   6 +-
 hw/arm/fsl-imx6.c           |   3 +-
 hw/intc/arm_gicv3_its_kvm.c |  12 +--
 target/arm/helper.c         | 178 ++++++++++++++++++++++++++++++++++++++++----
 target/arm/translate.c      |  39 ++++++++--
 6 files changed, 214 insertions(+), 30 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 7 November 2017 at 13:35, Peter Maydell <peter.maydell@linaro.org> wrote:
> A small set of arm bugfixes for rc0.
>
>
>
> The following changes since commit 5853e92207193e967abf5e4c25b4a551c7604725:
>
>   Merge remote-tracking branch 'remotes/pmaydell/tags/pull-cocoa-20171107' into staging (2017-11-07 12:19:48 +0000)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20171107
>
> for you to fetch changes up to 8a7348b5d62d7ea16807e6bea54b448a0184bb0f:
>
>   hw/intc/arm_gicv3_its: Don't abort on table save failure (2017-11-07 13:03:52 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * arm_gicv3_its: Don't abort on table save failure
>  * arm_gicv3_its: Fix the VM termination in vm_change_state_handler()
>  * translate.c: Fix usermode big-endian AArch32 LDREXD and STREXD
>  * hw/arm: Mark the "fsl,imx31/25/6" devices with user_creatable = false
>  * arm: implement cache/shareability attribute bits for PAR registers
>
> ----------------------------------------------------------------
> Andrew Baumann (1):
>       arm: implement cache/shareability attribute bits for PAR registers
>
> Eric Auger (1):
>       hw/intc/arm_gicv3_its: Don't abort on table save failure
>
> Peter Maydell (1):
>       translate.c: Fix usermode big-endian AArch32 LDREXD and STREXD
>
> Shanker Donthineni (1):
>       hw/intc/arm_gicv3_its: Fix the VM termination in vm_change_state_handler()
>
> Thomas Huth (3):
>       hw/arm: Mark the "fsl,imx6" device with user_creatable = false
>       hw/arm: Mark the "fsl,imx25" device with user_creatable = false
>       hw/arm: Mark the "fsl,imx31" device with user_creatable = false

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

ARM queue for 2.10: all M profile bugfixes...

thanks
-- PMM

The following changes since commit 25dd0e77898c3e10796d4cbeb35e8af5ba6ce975:

  Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging (2017-07-31 11:27:43 +0100)

are available in the git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170731

for you to fetch changes up to 89cbc3778a3d61761e2231e740269218c9a8a41d:

  hw/mps2_scc: fix incorrect properties (2017-07-31 13:11:56 +0100)

----------------------------------------------------------------
target-arm queue:
 * fix broken properties on MPS2 SCC device
 * fix MPU trace handling of write vs exec
 * fix MPU M profile bugs:
   - not handling system space or PPB region correctly
   - not resetting state
   - not migrating MPU_RNR

----------------------------------------------------------------
Peter Maydell (6):
      target/arm: Correct MPU trace handling of write vs execute
      target/arm: Don't do MPU lookups for addresses in M profile PPB region
      target/arm: Don't allow guest to make System space executable for M profile
      target/arm: Rename cp15.c6_rgnr to pmsav7.rnr
      target/arm: Move PMSAv7 reset into arm_cpu_reset() so M profile MPUs get reset
      target/arm: Migrate MPU_RNR register state for M profile cores

Philippe Mathieu-Daudé (1):
      hw/mps2_scc: fix incorrect properties

 target/arm/cpu.h      |  3 +--
 hw/intc/armv7m_nvic.c | 14 +++++-----
 hw/misc/mps2-scc.c    |  4 +--
 target/arm/cpu.c      | 14 ++++++++++
 target/arm/helper.c   | 71 ++++++++++++++++++++++++++++++++++-----------------
 target/arm/machine.c  | 30 +++++++++++++++++++++-
 6 files changed, 101 insertions(+), 35 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 31 July 2017 at 13:22, Peter Maydell <peter.maydell@linaro.org> wrote:
> ARM queue for 2.10: all M profile bugfixes...
>
> thanks
> -- PMM
>
> The following changes since commit 25dd0e77898c3e10796d4cbeb35e8af5ba6ce975:
>
>   Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging (2017-07-31 11:27:43 +0100)
>
> are available in the git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170731
>
> for you to fetch changes up to 89cbc3778a3d61761e2231e740269218c9a8a41d:
>
>   hw/mps2_scc: fix incorrect properties (2017-07-31 13:11:56 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * fix broken properties on MPS2 SCC device
>  * fix MPU trace handling of write vs exec
>  * fix MPU M profile bugs:
>    - not handling system space or PPB region correctly
>    - not resetting state
>    - not migrating MPU_RNR
>
> ----------------------------------------------------------------
> Peter Maydell (6):
>       target/arm: Correct MPU trace handling of write vs execute
>       target/arm: Don't do MPU lookups for addresses in M profile PPB region
>       target/arm: Don't allow guest to make System space executable for M profile
>       target/arm: Rename cp15.c6_rgnr to pmsav7.rnr
>       target/arm: Move PMSAv7 reset into arm_cpu_reset() so M profile MPUs get reset
>       target/arm: Migrate MPU_RNR register state for M profile cores
>
> Philippe Mathieu-Daudé (1):
>       hw/mps2_scc: fix incorrect properties

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

A small set of ARM patches, notably fixing bugs in breakpoint
and singlestep code, and repairing the long-broken highbank model.

The only other ARM thing I have on my radar for 2.5 is the Zynq
ADC controller, which I'll send separately if it makes it before
the freeze deadline.

thanks
-- PMM

The following changes since commit a8b4f9585a0bf5186fca793ce2c5d754cd8ec49a:

  Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-10' into staging (2015-11-10 09:39:24 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20151110

for you to fetch changes up to 577bf808958d06497928c639efaa473bf8c5e099:

  target-arm: Clean up DISAS_UPDATE usage in AArch32 translation code (2015-11-10 13:37:33 +0000)

----------------------------------------------------------------
target-arm queue:
 * fix bugs in gdb singlestep handling and breakpoints
 * minor code cleanup in arm_gic
 * clean up error messages in hw/arm/virt
 * fix highbank kernel booting by adding a board-setup blob

----------------------------------------------------------------
Andrew Jones (1):
      hw/arm/virt: error_report cleanups

Peter Crosthwaite (3):
      arm: boot: Add secure_board_setup flag
      arm: highbank: Defeature CPU override
      arm: highbank: Implement PSCI and dummy monitor

Sergey Fedorov (2):
      target-arm: Fix gdb singlestep handling in arm_debug_excp_handler()
      target-arm: Clean up DISAS_UPDATE usage in AArch32 translation code

Wei Huang (1):
      hw/intc/arm_gic: Remove the definition of NUM_CPU

 hw/arm/boot.c          | 10 +++++-
 hw/arm/highbank.c      | 91 +++++++++++++++++++++++++++++++++++++-------------
 hw/arm/virt.c          | 10 +++---
 hw/intc/arm_gic.c      |  8 ++---
 include/hw/arm/arm.h   |  6 ++++
 target-arm/op_helper.c |  8 ++++-
 target-arm/translate.c | 25 ++++++++------
 7 files changed, 111 insertions(+), 47 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 10 November 2015 at 13:51, Peter Maydell <peter.maydell@linaro.org> wrote:
> A small set of ARM patches, notably fixing bugs in breakpoint
> and singlestep code, and repairing the long-broken highbank model.
>
> The only other ARM thing I have on my radar for 2.5 is the Zynq
> ADC controller, which I'll send separately if it makes it before
> the freeze deadline.
>
> thanks
> -- PMM
>
> The following changes since commit a8b4f9585a0bf5186fca793ce2c5d754cd8ec49a:
>
>   Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-10' into staging (2015-11-10 09:39:24 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20151110
>
> for you to fetch changes up to 577bf808958d06497928c639efaa473bf8c5e099:
>
>   target-arm: Clean up DISAS_UPDATE usage in AArch32 translation code (2015-11-10 13:37:33 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * fix bugs in gdb singlestep handling and breakpoints
>  * minor code cleanup in arm_gic
>  * clean up error messages in hw/arm/virt
>  * fix highbank kernel booting by adding a board-setup blob
>

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Crosthwaite]

On Tue, Nov 10, 2015 at 8:38 AM, Peter Maydell <peter.maydell@linaro.org> wrote:
> On 10 November 2015 at 13:51, Peter Maydell <peter.maydell@linaro.org> wrote:
>> A small set of ARM patches, notably fixing bugs in breakpoint
>> and singlestep code, and repairing the long-broken highbank model.
>>
>> The only other ARM thing I have on my radar for 2.5 is the Zynq
>> ADC controller, which I'll send separately if it makes it before
>> the freeze deadline.
>>

It is on list I think. I don't see further review:

[PATCH for-2.5 v4 1/1] hw/misc: Add support for ADC controller in
Xilinx Zynq 7000

Regards,
Peter

>> thanks
>> -- PMM
>>
>> The following changes since commit a8b4f9585a0bf5186fca793ce2c5d754cd8ec49a:
>>
>>   Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-10' into staging (2015-11-10 09:39:24 +0000)
>>
>> are available in the git repository at:
>>
>>
>>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20151110
>>
>> for you to fetch changes up to 577bf808958d06497928c639efaa473bf8c5e099:
>>
>>   target-arm: Clean up DISAS_UPDATE usage in AArch32 translation code (2015-11-10 13:37:33 +0000)
>>
>> ----------------------------------------------------------------
>> target-arm queue:
>>  * fix bugs in gdb singlestep handling and breakpoints
>>  * minor code cleanup in arm_gic
>>  * clean up error messages in hw/arm/virt
>>  * fix highbank kernel booting by adding a board-setup blob
>>
>
> Applied, thanks.
>
> -- PMM
>

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 10 November 2015 at 17:12, Peter Crosthwaite
<crosthwaitepeter@gmail.com> wrote:
> On Tue, Nov 10, 2015 at 8:38 AM, Peter Maydell <peter.maydell@linaro.org> wrote:
>> On 10 November 2015 at 13:51, Peter Maydell <peter.maydell@linaro.org> wrote:
>>> A small set of ARM patches, notably fixing bugs in breakpoint
>>> and singlestep code, and repairing the long-broken highbank model.
>>>
>>> The only other ARM thing I have on my radar for 2.5 is the Zynq
>>> ADC controller, which I'll send separately if it makes it before
>>> the freeze deadline.
>>>
>
> It is on list I think. I don't see further review:
>
> [PATCH for-2.5 v4 1/1] hw/misc: Add support for ADC controller in
> Xilinx Zynq 7000

Ah yes, found it -- not sure why my search didn't turn it up earlier.

thanks
-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

Try number 2 with format string fix...

-- PMM

The following changes since commit fefa4b128de06cec6d513f00ee61e8208aed4a87:

  Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150923.0' into staging (2015-09-23 21:39:46 +0100)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150924

for you to fetch changes up to 85b4d5dae12580ecdd446c0f71afa04a95641c91:

  MAINTAINERS: update Allwinner A10 maintainer (2015-09-24 01:29:37 +0100)

----------------------------------------------------------------
target-arm queue:
 * support VGICv3 in KVM
 * fix bug in ACPI table entries for flash devices in virt board
 * update Allwinner entry in MAINTAINERS

----------------------------------------------------------------
Beniamino Galvani (1):
      MAINTAINERS: update Allwinner A10 maintainer

Pavel Fedin (4):
      intc/gic: Extract some reusable vGIC code
      arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
      hw/intc: Initial implementation of vGICv3
      hw/arm/virt: Add gic-version option to virt machine

Shannon Zhao (1):
      hw/arm/virt-acpi-build: Fix wrong size of flash in ACPI table

Shlomo Pongratz (1):
      hw/intc: Implement GIC-500 base class

 MAINTAINERS                        |   6 +-
 hw/arm/virt-acpi-build.c           |  56 ++++++++------
 hw/arm/virt.c                      | 124 ++++++++++++++++++++++++------
 hw/intc/Makefile.objs              |   2 +
 hw/intc/arm_gic_kvm.c              |  98 ++++++++----------------
 hw/intc/arm_gicv3_common.c         | 140 ++++++++++++++++++++++++++++++++++
 hw/intc/arm_gicv3_kvm.c            | 149 +++++++++++++++++++++++++++++++++++++
 hw/intc/vgic_common.h              |  35 +++++++++
 include/hw/acpi/acpi-defs.h        |   9 +++
 include/hw/arm/virt-acpi-build.h   |   1 +
 include/hw/arm/virt.h              |   4 +-
 include/hw/intc/arm_gicv3_common.h |  68 +++++++++++++++++
 include/sysemu/kvm.h               |  26 +++++++
 kvm-all.c                          |  34 +++++++++
 target-arm/kvm.c                   |  19 +++--
 target-arm/kvm_arm.h               |  19 +++++
 target-arm/machine.c               |  18 +++++
 17 files changed, 686 insertions(+), 122 deletions(-)
 create mode 100644 hw/intc/arm_gicv3_common.c
 create mode 100644 hw/intc/arm_gicv3_kvm.c
 create mode 100644 hw/intc/vgic_common.h
 create mode 100644 include/hw/intc/arm_gicv3_common.h

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Pavel Fedin]

 Hello!

 Thank you very much for your support and cooperation. I am back from my vacation and continuing my
work on live migration. Actually i already have working code, but need to settle down kernel API
first.

Kind regards,
Pavel Fedin
Expert Engineer
Samsung Electronics Research center Russia

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 23 September 2015 at 17:31, Peter Maydell <peter.maydell@linaro.org> wrote:
> Try number 2 with format string fix...
>
> -- PMM
>
> The following changes since commit fefa4b128de06cec6d513f00ee61e8208aed4a87:
>
>   Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150923.0' into staging (2015-09-23 21:39:46 +0100)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150924
>
> for you to fetch changes up to 85b4d5dae12580ecdd446c0f71afa04a95641c91:
>
>   MAINTAINERS: update Allwinner A10 maintainer (2015-09-24 01:29:37 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * support VGICv3 in KVM
>  * fix bug in ACPI table entries for flash devices in virt board
>  * update Allwinner entry in MAINTAINERS
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

A small pullreq, but I don't have anything else pending and I wanted
to get the GICv3 patches in this week.

-- PMM


The following changes since commit 684bb5770ec5d72a66620f64fc5d9672bf8d3509:

  Merge remote-tracking branch 'remotes/dgibson/tags/spapr-next-20150923' into staging (2015-09-23 16:52:54 +0100)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150923-1

for you to fetch changes up to 5d23e959fc6c8604d3c19b39b71c5a1effb2c347:

  MAINTAINERS: update Allwinner A10 maintainer (2015-09-23 22:37:40 +0100)

----------------------------------------------------------------
target-arm queue:
 * support VGICv3 in KVM
 * fix bug in ACPI table entries for flash devices in virt board
 * update Allwinner entry in MAINTAINERS

----------------------------------------------------------------
Beniamino Galvani (1):
      MAINTAINERS: update Allwinner A10 maintainer

Pavel Fedin (4):
      intc/gic: Extract some reusable vGIC code
      arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
      hw/intc: Initial implementation of vGICv3
      hw/arm/virt: Add gic-version option to virt machine

Shannon Zhao (1):
      hw/arm/virt-acpi-build: Fix wrong size of flash in ACPI table

Shlomo Pongratz (1):
      hw/intc: Implement GIC-500 base class

 MAINTAINERS                        |   6 +-
 hw/arm/virt-acpi-build.c           |  56 ++++++++------
 hw/arm/virt.c                      | 124 ++++++++++++++++++++++++------
 hw/intc/Makefile.objs              |   2 +
 hw/intc/arm_gic_kvm.c              |  98 ++++++++----------------
 hw/intc/arm_gicv3_common.c         | 140 ++++++++++++++++++++++++++++++++++
 hw/intc/arm_gicv3_kvm.c            | 149 +++++++++++++++++++++++++++++++++++++
 hw/intc/vgic_common.h              |  35 +++++++++
 include/hw/acpi/acpi-defs.h        |   9 +++
 include/hw/arm/virt-acpi-build.h   |   1 +
 include/hw/arm/virt.h              |   4 +-
 include/hw/intc/arm_gicv3_common.h |  68 +++++++++++++++++
 include/sysemu/kvm.h               |  26 +++++++
 kvm-all.c                          |  34 +++++++++
 target-arm/kvm.c                   |  19 +++--
 target-arm/kvm_arm.h               |  19 +++++
 target-arm/machine.c               |  18 +++++
 17 files changed, 686 insertions(+), 122 deletions(-)
 create mode 100644 hw/intc/arm_gicv3_common.c
 create mode 100644 hw/intc/arm_gicv3_kvm.c
 create mode 100644 hw/intc/vgic_common.h
 create mode 100644 include/hw/intc/arm_gicv3_common.h

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 23 September 2015 at 14:43, Peter Maydell <peter.maydell@linaro.org> wrote:
> A small pullreq, but I don't have anything else pending and I wanted
> to get the GICv3 patches in this week.
>
> -- PMM
>
>
> The following changes since commit 684bb5770ec5d72a66620f64fc5d9672bf8d3509:
>
>   Merge remote-tracking branch 'remotes/dgibson/tags/spapr-next-20150923' into staging (2015-09-23 16:52:54 +0100)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150923-1
>
> for you to fetch changes up to 5d23e959fc6c8604d3c19b39b71c5a1effb2c347:
>
>   MAINTAINERS: update Allwinner A10 maintainer (2015-09-23 22:37:40 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * support VGICv3 in KVM
>  * fix bug in ACPI table entries for flash devices in virt board
>  * update Allwinner entry in MAINTAINERS
>
> ----------------------------------------------------------------

Minor fixup required to get it to compile on 32-bit:

--- a/kvm-all.c
+++ b/kvm-all.c
@@ -2036,7 +2036,7 @@ void kvm_device_access(int fd, int group, uint64_t attr,
                            &kvmattr);
     if (err < 0) {
         error_report("KVM_%s_DEVICE_ATTR failed: %s\n"
-                     "Group %d attr 0x%016zX", write ? "SET" : "GET",
+                     "Group %d attr 0x%016" PRIx64 , write ? "SET" : "GET",
                      strerror(-err), group, attr);
         abort();
     }


-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

target-arm queue before hardfreeze: these are pretty much all
bugfixes.

-- PMM

The following changes since commit f50a1640fb82708a5d528dee1ace42a224b95b15:

  Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging (2015-07-05 20:35:47 +0100)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150706

for you to fetch changes up to 257621a9566054472d1d55a819880d0f9da02bda:

  arm_mptimer: Respect IT bit state (2015-07-06 10:26:35 +0100)

----------------------------------------------------------------
target-arm queue:
 * TLBI ALLEI1IS should operate on all CPUs, not just this one
 * Fix interval interrupt of cadence ttc in decrement mode
 * Implement YIELD insn to yield in ARM and Thumb translators
 * ARM GIC: reset all registers
 * arm_mptimer: fix timer shutdown and mode change
 * arm_mptimer: respect IT bit state

----------------------------------------------------------------
Dmitry Osipenko (2):
      arm_mptimer: Fix timer shutdown and mode change
      arm_mptimer: Respect IT bit state

Johannes Schlatow (1):
      Fix interval interrupt of cadence ttc when timer is in decrement mode

Peter Maydell (3):
      target-arm: Split DISAS_YIELD from DISAS_WFE
      target-arm: Implement YIELD insn to yield in ARM and Thumb translators
      hw/intc/arm_gic_common.c: Reset all registers

Sergey Fedorov (1):
      target-arm: fix write helper for TLBI ALLE1IS

 hw/intc/arm_gic_common.c   | 21 ++++++++++++++++++---
 hw/timer/arm_mptimer.c     | 13 ++++++++++---
 hw/timer/cadence_ttc.c     |  9 ++++-----
 target-arm/helper.c        |  2 +-
 target-arm/helper.h        |  1 +
 target-arm/op_helper.c     | 18 +++++++++++++++---
 target-arm/translate-a64.c |  6 ++++++
 target-arm/translate.c     |  7 +++++++
 target-arm/translate.h     |  1 +
 9 files changed, 63 insertions(+), 15 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 6 July 2015 at 10:59, Peter Maydell <peter.maydell@linaro.org> wrote:
> target-arm queue before hardfreeze: these are pretty much all
> bugfixes.
>
> -- PMM
>
> The following changes since commit f50a1640fb82708a5d528dee1ace42a224b95b15:
>
>   Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into staging (2015-07-05 20:35:47 +0100)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150706
>
> for you to fetch changes up to 257621a9566054472d1d55a819880d0f9da02bda:
>
>   arm_mptimer: Respect IT bit state (2015-07-06 10:26:35 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * TLBI ALLEI1IS should operate on all CPUs, not just this one
>  * Fix interval interrupt of cadence ttc in decrement mode
>  * Implement YIELD insn to yield in ARM and Thumb translators
>  * ARM GIC: reset all registers
>  * arm_mptimer: fix timer shutdown and mode change
>  * arm_mptimer: respect IT bit state

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

Last batch of bugfixes before hardfreeze...

-- PMM

The following changes since commit f421f05754ac5aabe15f12051390204116408b00:

  Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-1.8.1-20150316-1' into staging (2015-03-16 10:58:11 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150316

for you to fetch changes up to b8d43285a4db12156c40ba6fdbd8002c383fcbca:

  linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUs (2015-03-16 12:30:47 +0000)

----------------------------------------------------------------
target-arm queue:
 * fix handling of execute-never bits in page table walks
 * tell kernel to initialize KVM GIC in realize function
 * fix handling of STM (user) with r15 in register list
 * ignore low bit of PC in M-profile exception return
 * fix linux-user get/set_tls syscalls on CPUs with TZ

----------------------------------------------------------------
Andrew Jones (3):
      target-arm: convert check_ap to ap_to_rw_prot
      target-arm: fix get_phys_addr_v6/SCTLR_AFE access check
      target-arm: get_phys_addr_lpae: more xn control

Eric Auger (1):
      hw/intc/arm_gic: Initialize the vgic in the realize function

Mikhail Ilyin (1):
      linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUs

Peter Maydell (2):
      target-arm: Fix handling of STM (user) with r15 in register list
      target-arm: Ignore low bit of PC in M-profile exception return

 hw/intc/arm_gic_kvm.c       |   7 ++
 linux-user/arm/target_cpu.h |  15 ++-
 linux-user/main.c           |   2 +-
 target-arm/helper.c         | 222 ++++++++++++++++++++++++++++++++------------
 target-arm/translate.c      |  18 ++--
 5 files changed, 197 insertions(+), 67 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 16 March 2015 at 12:40, Peter Maydell <peter.maydell@linaro.org> wrote:
> Last batch of bugfixes before hardfreeze...
>
> -- PMM
>
> The following changes since commit f421f05754ac5aabe15f12051390204116408b00:
>
>   Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-1.8.1-20150316-1' into staging (2015-03-16 10:58:11 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150316
>
> for you to fetch changes up to b8d43285a4db12156c40ba6fdbd8002c383fcbca:
>
>   linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUs (2015-03-16 12:30:47 +0000)

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

Last handful of patches before hardfreeze; these are just
refactoring/cleanup, but I'd like to get them in to avoid
clashes and merge conflicts with other series like TZ.

thanks
-- PMM

The following changes since commit 949ca9e479c381a63ddb257adca1a6f0c44d898e:

  Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2014-11-03 22:51:08 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20141104

for you to fetch changes up to 9fae24f55496ea178e9e8e351f82a02f34ddaf4d:

  target-arm: Correct condition for taking VIRQ and VFIQ (2014-11-04 12:05:23 +0000)

----------------------------------------------------------------
target-arm queue:
 * avoid passing CPU env pointer around in A32/T32 decoders
 * split M profile exception masking out from A/R profile

----------------------------------------------------------------
Peter Maydell (7):
      target-arm/translate.c: Use arm_dc_feature() in ENABLE_ARCH_ macros
      target-arm/translate.c: Use arm_dc_feature() rather than arm_feature()
      target-arm/translate.c: Don't use IS_M()
      target-arm/translate.c: Don't pass CPUARMState around in the decoder
      target-arm/translate.c: Don't pass CPUARMState * to disas_arm_insn()
      target-arm: Separate out M profile cpu_exec_interrupt handling
      target-arm: Correct condition for taking VIRQ and VFIQ

 target-arm/cpu.c       |  49 +++++++--
 target-arm/cpu.h       |  20 +---
 target-arm/translate.c | 280 +++++++++++++++++++++++++++----------------------
 3 files changed, 197 insertions(+), 152 deletions(-)

Re: [Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

On 4 November 2014 12:30, Peter Maydell <peter.maydell@linaro.org> wrote:
> Last handful of patches before hardfreeze; these are just
> refactoring/cleanup, but I'd like to get them in to avoid
> clashes and merge conflicts with other series like TZ.
>
> thanks
> -- PMM
>
> The following changes since commit 949ca9e479c381a63ddb257adca1a6f0c44d898e:
>
>   Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging (2014-11-03 22:51:08 +0000)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20141104
>
> for you to fetch changes up to 9fae24f55496ea178e9e8e351f82a02f34ddaf4d:
>
>   target-arm: Correct condition for taking VIRQ and VFIQ (2014-11-04 12:05:23 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * avoid passing CPU env pointer around in A32/T32 decoders
>  * split M profile exception masking out from A/R profile
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/7] target-arm queue

[Peter Maydell]

Hi; these are the pending target-arm patches I'd like to get in for 1.0;
a couple of minor ones plus the A15 insn work. Please pull.

PS: I'm not sure who the best person to cc on target-arm pull requests
is; any suggestions?

thanks
-- PMM

The following changes since commit cfce6d8934243871c4dc6d0c5248b0b27a1b8d80:

  i8259: Move to hw library (2011-10-16 11:11:56 +0000)

are available in the git repository at:
  git://git.linaro.org/people/pmaydell/qemu-arm.git target-arm.for-upstream

Christophe LYON (1):
      rsqrte_f32: No need to copy sign bit.

Dmitry Koshelev (1):
      target-arm/machine.c: Restore VFP registers correctly

Peter Maydell (5):
      target-arm: v6 media multiply space: UNDEF on unassigned encodings
      target-arm: Rename ARM_FEATURE_DIV to _THUMB_DIV
      target-arm: Add ARM UDIV/SDIV support
      softfloat: Implement fused multiply-add
      target-arm: Implement VFPv4 fused multiply-accumulate insns

 fpu/softfloat-specialize.h |  178 ++++++++++++++++++
 fpu/softfloat.c            |  427 ++++++++++++++++++++++++++++++++++++++++++++
 fpu/softfloat.h            |   14 ++
 target-arm/cpu.h           |    4 +-
 target-arm/helper.c        |   24 ++-
 target-arm/helper.h        |    3 +
 target-arm/machine.c       |    2 +-
 target-arm/translate.c     |  118 ++++++++++++-
 8 files changed, 759 insertions(+), 11 deletions(-)