From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: stefano.stabellini@eu.citrix.com, xen-devel@lists.xenproject.org,
qemu-devel@nongnu.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: [Qemu-devel] [PATCH RFC 1 7/8] xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
Date: Mon, 29 Jun 2015 17:02:04 -0400 [thread overview]
Message-ID: <1435611725-15161-8-git-send-email-konrad.wilk@oracle.com> (raw)
In-Reply-To: <1435611725-15161-1-git-send-email-konrad.wilk@oracle.com>
This way we can call it if we fail during init.
This code movement introduces no changes.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
hw/xen/xen_pt.c | 119 +++++++++++++++++++++++++++++---------------------------
1 file changed, 62 insertions(+), 57 deletions(-)
diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
index cda6a2d..589c6c6 100644
--- a/hw/xen/xen_pt.c
+++ b/hw/xen/xen_pt.c
@@ -686,6 +686,67 @@ static const MemoryListener xen_pt_io_listener = {
.priority = 10,
};
+/* destroy. */
+static void xen_pt_destroy(PCIDevice *d) {
+
+ XenPCIPassthroughState *s = XEN_PT_DEVICE(d);
+ uint8_t machine_irq = s->machine_irq;
+ uint8_t intx;
+ int rc;
+
+ /* Note that if xen_host_pci_device_put had closed config_fd, then
+ * intx value becomes 0xff. */
+ intx = xen_pt_pci_intx(s);
+ if (machine_irq && !xen_host_pci_device_closed(&s->real_device)) {
+ rc = xc_domain_unbind_pt_irq(xen_xc, xen_domid, machine_irq,
+ PT_IRQ_TYPE_PCI,
+ pci_bus_num(d->bus),
+ PCI_SLOT(s->dev.devfn),
+ intx,
+ 0 /* isa_irq */);
+ if (rc < 0) {
+ XEN_PT_ERR(d, "unbinding of interrupt INT%c failed."
+ " (machine irq: %i, err: %d)"
+ " But bravely continuing on..\n",
+ 'a' + intx, machine_irq, errno);
+ }
+ }
+
+ /* N.B. xen_pt_config_delete takes care of freeing them. */
+ if (s->msi) {
+ xen_pt_msi_disable(s);
+ }
+ if (s->msix) {
+ xen_pt_msix_disable(s);
+ }
+
+ if (machine_irq) {
+ xen_pt_mapped_machine_irq[machine_irq]--;
+
+ if (xen_pt_mapped_machine_irq[machine_irq] == 0) {
+ rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
+
+ if (rc < 0) {
+ XEN_PT_ERR(d, "unmapping of interrupt %i failed. (err: %d)"
+ " But bravely continuing on..\n",
+ machine_irq, errno);
+ }
+ }
+ s->machine_irq = 0;
+ }
+
+ /* delete all emulated config registers */
+ xen_pt_config_delete(s);
+
+ if (s->listener_set) {
+ memory_listener_unregister(&s->memory_listener);
+ memory_listener_unregister(&s->io_listener);
+ s->listener_set = false;
+ }
+ if (!xen_host_pci_device_closed(&s->real_device)) {
+ xen_host_pci_device_put(&s->real_device);
+ }
+}
/* init */
static int xen_pt_initfn(PCIDevice *d)
@@ -820,63 +881,7 @@ out:
static void xen_pt_unregister_device(PCIDevice *d)
{
- XenPCIPassthroughState *s = XEN_PT_DEVICE(d);
- uint8_t machine_irq = s->machine_irq;
- uint8_t intx;
- int rc;
-
- /* Note that if xen_host_pci_device_put had closed config_fd, then
- * intx value becomes 0xff. */
- intx = xen_pt_pci_intx(s);
- if (machine_irq && !xen_host_pci_device_closed(&s->real_device)) {
- rc = xc_domain_unbind_pt_irq(xen_xc, xen_domid, machine_irq,
- PT_IRQ_TYPE_PCI,
- pci_bus_num(d->bus),
- PCI_SLOT(s->dev.devfn),
- intx,
- 0 /* isa_irq */);
- if (rc < 0) {
- XEN_PT_ERR(d, "unbinding of interrupt INT%c failed."
- " (machine irq: %i, err: %d)"
- " But bravely continuing on..\n",
- 'a' + intx, machine_irq, errno);
- }
- }
-
- /* N.B. xen_pt_config_delete takes care of freeing them. */
- if (s->msi) {
- xen_pt_msi_disable(s);
- }
- if (s->msix) {
- xen_pt_msix_disable(s);
- }
-
- if (machine_irq) {
- xen_pt_mapped_machine_irq[machine_irq]--;
-
- if (xen_pt_mapped_machine_irq[machine_irq] == 0) {
- rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
-
- if (rc < 0) {
- XEN_PT_ERR(d, "unmapping of interrupt %i failed. (err: %d)"
- " But bravely continuing on..\n",
- machine_irq, errno);
- }
- }
- s->machine_irq = 0;
- }
-
- /* delete all emulated config registers */
- xen_pt_config_delete(s);
-
- if (s->listener_set) {
- memory_listener_unregister(&s->memory_listener);
- memory_listener_unregister(&s->io_listener);
- s->listener_set = false;
- }
- if (!xen_host_pci_device_closed(&s->real_device)) {
- xen_host_pci_device_put(&s->real_device);
- }
+ xen_pt_destroy(d);
}
static Property xen_pci_passthrough_properties[] = {
--
2.1.0
next prev parent reply other threads:[~2015-06-29 21:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 21:01 [Qemu-devel] [PATCH RFC v1] Sync dev.config with XenPTReg->data field Konrad Rzeszutek Wilk
2015-06-29 21:01 ` [Qemu-devel] [PATCH RFC 1 1/8] xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config Konrad Rzeszutek Wilk
2015-07-01 13:28 ` Stefano Stabellini
2015-06-29 21:01 ` [Qemu-devel] [PATCH RFC 1 2/8] xen/pt: Sync up the dev.config and data values Konrad Rzeszutek Wilk
2015-07-01 13:48 ` Stefano Stabellini
2015-06-29 21:02 ` [Qemu-devel] [PATCH RFC 1 3/8] xen/pt: Check if reg->init is past the reg->size Konrad Rzeszutek Wilk
2015-07-01 13:54 ` Stefano Stabellini
2015-06-29 21:02 ` [Qemu-devel] [PATCH RFC 1 4/8] xen/pt: Log xen_host_pci_get in two init functions Konrad Rzeszutek Wilk
2015-07-01 13:56 ` Stefano Stabellini
2015-06-29 21:02 ` [Qemu-devel] [PATCH RFC 1 5/8] xen/pt: Log xen_host_pci_get/set errors in MSI code Konrad Rzeszutek Wilk
2015-07-01 13:58 ` Stefano Stabellini
2015-06-29 21:02 ` [Qemu-devel] [PATCH RFC 1 6/8] xen/pt: Make xen_pt_unregister_device idempotent Konrad Rzeszutek Wilk
2015-07-01 14:04 ` Stefano Stabellini
2015-07-02 18:54 ` [Qemu-devel] [Xen-devel] " Konrad Rzeszutek Wilk
2015-07-14 11:38 ` Stefano Stabellini
2015-06-29 21:02 ` Konrad Rzeszutek Wilk [this message]
2015-07-01 14:05 ` [Qemu-devel] [PATCH RFC 1 7/8] xen/pt: Move bulk of xen_pt_unregister_device in its own routine Stefano Stabellini
2015-06-29 21:02 ` [Qemu-devel] [PATCH RFC 1 8/8] xen/pt: Check for return values for xen_host_pci_[get|set] in init Konrad Rzeszutek Wilk
2015-07-01 14:06 ` Stefano Stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435611725-15161-8-git-send-email-konrad.wilk@oracle.com \
--to=konrad.wilk@oracle.com \
--cc=qemu-devel@nongnu.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).