qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: seabios@seabios.org
Cc: Gerd Hoffmann <kraxel@redhat.com>,
	qemu-devel@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>
Subject: [Qemu-devel] [PATCH v2 15/22] virtio: add version 1.0 support to vp_notify
Date: Tue, 30 Jun 2015 10:39:06 +0200	[thread overview]
Message-ID: <1435653553-7728-16-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1435653553-7728-1-git-send-email-kraxel@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 src/hw/virtio-pci.c  | 22 +++++++++++++++++++++-
 src/hw/virtio-pci.h  |  7 ++-----
 src/hw/virtio-ring.c |  2 +-
 src/hw/virtio-ring.h |  1 +
 4 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/src/hw/virtio-pci.c b/src/hw/virtio-pci.c
index 5a599c3..3f530e5 100644
--- a/src/hw/virtio-pci.c
+++ b/src/hw/virtio-pci.c
@@ -97,6 +97,24 @@ void vp_reset(struct vp_device *vp)
     }
 }
 
+void vp_notify(struct vp_device *vp, struct vring_virtqueue *vq)
+{
+    if (vp->use_modern) {
+        u32 addr = vp->notify.addr +
+            vq->queue_notify_off *
+            vp->notify_off_multiplier;
+        if (vp->notify.is_io) {
+            outw(vq->queue_index, addr);
+        } else {
+            writew((void*)addr, vq->queue_index);
+        }
+        dprintf(9, "vp notify %x (%d) -- 0x%x\n",
+                addr, 2, vq->queue_index);
+    } else {
+        vp_write(&vp->legacy, virtio_pci_legacy, queue_notify, vq->queue_index);
+    }
+}
+
 int vp_find_vq(struct vp_device *vp, int queue_index,
                struct vring_virtqueue **p_vq)
 {
@@ -163,7 +181,7 @@ struct vp_device *vp_init_simple(struct pci_device *pci)
     struct vp_device *vp = malloc_high(sizeof(*vp));
     u8 cap = pci_find_capability(pci, PCI_CAP_ID_VNDR, 0);
     struct vp_cap *vp_cap;
-    u32 addr, offset;
+    u32 addr, offset, mul;
     u8 type;
 
     memset(vp, 0, sizeof(*vp));
@@ -176,6 +194,8 @@ struct vp_device *vp_init_simple(struct pci_device *pci)
             break;
         case VIRTIO_PCI_CAP_NOTIFY_CFG:
             vp_cap = &vp->notify;
+            mul = offsetof(struct virtio_pci_notify_cap, notify_off_multiplier);
+            vp->notify_off_multiplier = pci_config_readl(pci->bdf, cap + mul);
             break;
         case VIRTIO_PCI_CAP_ISR_CFG:
             vp_cap = &vp->isr;
diff --git a/src/hw/virtio-pci.h b/src/hw/virtio-pci.h
index 1e2ac4f..7e7a377 100644
--- a/src/hw/virtio-pci.h
+++ b/src/hw/virtio-pci.h
@@ -125,6 +125,7 @@ struct vp_cap {
 struct vp_device {
     unsigned int ioaddr;
     struct vp_cap common, notify, isr, device, legacy;
+    u32 notify_off_multiplier;
     u8 use_modern;
 };
 
@@ -233,11 +234,6 @@ void vp_set_status(struct vp_device *vp, u8 status);
 u8 vp_get_isr(struct vp_device *vp);
 void vp_reset(struct vp_device *vp);
 
-static inline void vp_notify(struct vp_device *vp, int queue_index)
-{
-    outw(queue_index, GET_LOWFLAT(vp->ioaddr) + VIRTIO_PCI_QUEUE_NOTIFY);
-}
-
 static inline void vp_del_vq(struct vp_device *vp, int queue_index)
 {
    int ioaddr = GET_LOWFLAT(vp->ioaddr);
@@ -252,6 +248,7 @@ static inline void vp_del_vq(struct vp_device *vp, int queue_index)
 struct pci_device;
 struct vring_virtqueue;
 struct vp_device *vp_init_simple(struct pci_device *pci);
+void vp_notify(struct vp_device *vp, struct vring_virtqueue *vq);
 int vp_find_vq(struct vp_device *vp, int queue_index,
                struct vring_virtqueue **p_vq);
 #endif /* _VIRTIO_PCI_H_ */
diff --git a/src/hw/virtio-ring.c b/src/hw/virtio-ring.c
index 5c6a32e..6c86c38 100644
--- a/src/hw/virtio-ring.c
+++ b/src/hw/virtio-ring.c
@@ -145,5 +145,5 @@ void vring_kick(struct vp_device *vp, struct vring_virtqueue *vq, int num_added)
     smp_wmb();
     SET_LOWFLAT(avail->idx, GET_LOWFLAT(avail->idx) + num_added);
 
-    vp_notify(vp, GET_LOWFLAT(vq->queue_index));
+    vp_notify(vp, vq);
 }
diff --git a/src/hw/virtio-ring.h b/src/hw/virtio-ring.h
index 553a508..7df9004 100644
--- a/src/hw/virtio-ring.h
+++ b/src/hw/virtio-ring.h
@@ -88,6 +88,7 @@ struct vring_virtqueue {
    u16 vdata[MAX_QUEUE_NUM];
    /* PCI */
    int queue_index;
+   int queue_notify_off;
 };
 
 struct vring_list {
-- 
1.8.3.1

  parent reply	other threads:[~2015-06-30  8:39 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-30  8:38 [Qemu-devel] [PATCH v2 00/22] virtio: add version 1.0 support Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 01/22] pci: allow to loop over capabilities Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 02/22] virtio: run drivers in 32bit mode Gerd Hoffmann
2015-06-30 14:36   ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-07-01  7:27     ` Gerd Hoffmann
2015-07-01  8:08   ` [Qemu-devel] " Michael S. Tsirkin
2015-07-01 12:30     ` Gerd Hoffmann
2015-07-01 13:50       ` Michael S. Tsirkin
2015-07-01 13:59         ` Michael S. Tsirkin
2015-07-01 14:03         ` Gerd Hoffmann
2015-07-01 14:13         ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 03/22] virtio: add struct vp_device Gerd Hoffmann
2015-06-30 14:33   ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-07-01  7:34     ` Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 04/22] virtio: pass struct pci_device to vp_init_simple Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 05/22] virtio: add version 1.0 structs and #defines Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 06/22] virtio: add version 0.9.5 struct Gerd Hoffmann
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 07/22] virtio: find version 1.0 virtio capabilities Gerd Hoffmann
2015-07-01 11:43   ` Michael S. Tsirkin
2015-07-01 12:24     ` Gerd Hoffmann
2015-07-01 12:28       ` Michael S. Tsirkin
2015-07-01 12:49         ` Gerd Hoffmann
2015-07-01 13:49           ` Michael S. Tsirkin
2015-06-30  8:38 ` [Qemu-devel] [PATCH v2 08/22] virtio: create vp_cap struct for legacy bar Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 09/22] virtio: add version 0.9.5 struct [fixup] Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 10/22] virtio: add read/write functions and macros Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 11/22] virtio: make features 64bit, support version 1.0 features Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 12/22] virtio: add version 1.0 support to vp_{get, set}_status Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 13/22] virtio: add version 1.0 support to vp_get_isr Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 14/22] virtio: add version 1.0 support to vp_reset Gerd Hoffmann
2015-06-30  8:39 ` Gerd Hoffmann [this message]
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 16/22] virtio: remove unused vp_del_vq Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 17/22] virtio: add version 1.0 support to vp_find_vq Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 18/22] virtio-scsi: fix initialization for version 1.0 Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 19/22] virtio-blk: " Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 20/22] virtio: use version 1.0 if available (flip the big switch) Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 21/22] virtio: also probe version 1.0 pci ids Gerd Hoffmann
2015-06-30  8:39 ` [Qemu-devel] [PATCH v2 22/22] virtio: legacy cleanup Gerd Hoffmann
2015-07-01 11:48 ` [Qemu-devel] [PATCH v2 00/22] virtio: add version 1.0 support Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1435653553-7728-16-git-send-email-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=seabios@seabios.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).