From: Gerd Hoffmann <kraxel@redhat.com>
To: seabios@seabios.org
Cc: Gerd Hoffmann <kraxel@redhat.com>,
qemu-devel@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>
Subject: [Qemu-devel] [PATCH v2 19/22] virtio-blk: fix initialization for version 1.0
Date: Tue, 30 Jun 2015 10:39:10 +0200 [thread overview]
Message-ID: <1435653553-7728-20-git-send-email-kraxel@redhat.com> (raw)
In-Reply-To: <1435653553-7728-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
src/hw/virtio-blk.c | 85 +++++++++++++++++++++++++++++++++++++++++------------
src/hw/virtio-pci.h | 13 ++++----
2 files changed, 72 insertions(+), 26 deletions(-)
diff --git a/src/hw/virtio-blk.c b/src/hw/virtio-blk.c
index 9e56d42..0a4a677 100644
--- a/src/hw/virtio-blk.c
+++ b/src/hw/virtio-blk.c
@@ -102,6 +102,7 @@ static void
init_virtio_blk(struct pci_device *pci)
{
u16 bdf = pci->bdf;
+ u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER;
dprintf(1, "found virtio-blk at %x:%x\n", pci_bdf_to_bus(bdf),
pci_bdf_to_dev(bdf));
struct virtiodrive_s *vdrive = malloc_fseg(sizeof(*vdrive));
@@ -113,42 +114,88 @@ init_virtio_blk(struct pci_device *pci)
vdrive->drive.type = DTYPE_VIRTIO_BLK;
vdrive->drive.cntl_id = bdf;
- vdrive->vp = vp_init_simple(pci);
+ struct vp_device *vp = vdrive->vp = vp_init_simple(pci);
if (vp_find_vq(vdrive->vp, 0, &vdrive->vq) < 0 ) {
dprintf(1, "fail to find vq for virtio-blk %x:%x\n",
pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf));
goto fail;
}
- struct virtio_blk_config cfg;
- vp_get(vdrive->vp, 0, &cfg, sizeof(cfg));
+ if (vp->use_modern) {
+ u64 features = vp_get_features(vp);
+ u64 version1 = 1ull << VIRTIO_F_VERSION_1;
+ u64 blk_size = 1ull << VIRTIO_BLK_F_BLK_SIZE;
+ if (!(features & version1)) {
+ dprintf(1, "modern device without virtio_1 feature bit: %x:%x\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf));
+ goto fail;
+ }
- u64 f = vp_get_features(vdrive->vp);
- vdrive->drive.blksize = (f & (1 << VIRTIO_BLK_F_BLK_SIZE)) ?
- cfg.blk_size : DISK_SECTOR_SIZE;
+ features = features & (version1 | blk_size);
+ vp_set_features(vp, features);
+ status |= VIRTIO_CONFIG_S_FEATURES_OK;
+ vp_set_status(vp, status);
+ if (!(vp_get_status(vp) & VIRTIO_CONFIG_S_FEATURES_OK)) {
+ dprintf(1, "device didn't accept features: %x:%x\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf));
+ goto fail;
+ }
- vdrive->drive.sectors = cfg.capacity;
- dprintf(3, "virtio-blk %x:%x blksize=%d sectors=%u\n",
- pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
- vdrive->drive.blksize, (u32)vdrive->drive.sectors);
+ vdrive->drive.sectors =
+ vp_read(&vp->device, struct virtio_blk_config, capacity);
+ if (features & blk_size) {
+ vdrive->drive.blksize =
+ vp_read(&vp->device, struct virtio_blk_config, blk_size);
+ } else {
+ vdrive->drive.blksize = DISK_SECTOR_SIZE;
+ }
+ if (vdrive->drive.blksize != DISK_SECTOR_SIZE) {
+ dprintf(1, "virtio-blk %x:%x block size %d is unsupported\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+ vdrive->drive.blksize);
+ goto fail;
+ }
+ dprintf(3, "virtio-blk %x:%x blksize=%d sectors=%u\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+ vdrive->drive.blksize, (u32)vdrive->drive.sectors);
+
+ vdrive->drive.pchs.cylinder =
+ vp_read(&vp->device, struct virtio_blk_config, cylinders);
+ vdrive->drive.pchs.head =
+ vp_read(&vp->device, struct virtio_blk_config, heads);
+ vdrive->drive.pchs.sector =
+ vp_read(&vp->device, struct virtio_blk_config, sectors);
+ } else {
+ struct virtio_blk_config cfg;
+ vp_get_legacy(vdrive->vp, 0, &cfg, sizeof(cfg));
- if (vdrive->drive.blksize != DISK_SECTOR_SIZE) {
- dprintf(1, "virtio-blk %x:%x block size %d is unsupported\n",
+ u64 f = vp_get_features(vdrive->vp);
+ vdrive->drive.blksize = (f & (1 << VIRTIO_BLK_F_BLK_SIZE)) ?
+ cfg.blk_size : DISK_SECTOR_SIZE;
+
+ vdrive->drive.sectors = cfg.capacity;
+ dprintf(3, "virtio-blk %x:%x blksize=%d sectors=%u\n",
pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
- vdrive->drive.blksize);
- goto fail;
+ vdrive->drive.blksize, (u32)vdrive->drive.sectors);
+
+ if (vdrive->drive.blksize != DISK_SECTOR_SIZE) {
+ dprintf(1, "virtio-blk %x:%x block size %d is unsupported\n",
+ pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+ vdrive->drive.blksize);
+ goto fail;
+ }
+ vdrive->drive.pchs.cylinder = cfg.cylinders;
+ vdrive->drive.pchs.head = cfg.heads;
+ vdrive->drive.pchs.sector = cfg.sectors;
}
- vdrive->drive.pchs.cylinder = cfg.cylinders;
- vdrive->drive.pchs.head = cfg.heads;
- vdrive->drive.pchs.sector = cfg.sectors;
char *desc = znprintf(MAXDESCSIZE, "Virtio disk PCI:%x:%x",
pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf));
boot_add_hd(&vdrive->drive, desc, bootprio_find_pci_device(pci));
- vp_set_status(vdrive->vp, VIRTIO_CONFIG_S_ACKNOWLEDGE |
- VIRTIO_CONFIG_S_DRIVER | VIRTIO_CONFIG_S_DRIVER_OK);
+ status |= VIRTIO_CONFIG_S_DRIVER_OK;
+ vp_set_status(vdrive->vp, status);
return;
fail:
diff --git a/src/hw/virtio-pci.h b/src/hw/virtio-pci.h
index 2790a48..f1d5e3e 100644
--- a/src/hw/virtio-pci.h
+++ b/src/hw/virtio-pci.h
@@ -218,15 +218,14 @@ static inline void _vp_write(struct vp_cap *cap, u32 offset, u8 size, u64 var)
u64 vp_get_features(struct vp_device *vp);
void vp_set_features(struct vp_device *vp, u64 features);
-static inline void vp_get(struct vp_device *vp, unsigned offset,
- void *buf, unsigned len)
+static inline void vp_get_legacy(struct vp_device *vp, unsigned offset,
+ void *buf, unsigned len)
{
- int ioaddr = GET_LOWFLAT(vp->ioaddr);
- u8 *ptr = buf;
- unsigned i;
+ u8 *ptr = buf;
+ unsigned i;
- for (i = 0; i < len; i++)
- ptr[i] = inb(ioaddr + VIRTIO_PCI_CONFIG + offset + i);
+ for (i = 0; i < len; i++)
+ ptr[i] = inb(vp->ioaddr + VIRTIO_PCI_CONFIG + offset + i);
}
u8 vp_get_status(struct vp_device *vp);
--
1.8.3.1
next prev parent reply other threads:[~2015-06-30 8:39 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-30 8:38 [Qemu-devel] [PATCH v2 00/22] virtio: add version 1.0 support Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 01/22] pci: allow to loop over capabilities Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 02/22] virtio: run drivers in 32bit mode Gerd Hoffmann
2015-06-30 14:36 ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-07-01 7:27 ` Gerd Hoffmann
2015-07-01 8:08 ` [Qemu-devel] " Michael S. Tsirkin
2015-07-01 12:30 ` Gerd Hoffmann
2015-07-01 13:50 ` Michael S. Tsirkin
2015-07-01 13:59 ` Michael S. Tsirkin
2015-07-01 14:03 ` Gerd Hoffmann
2015-07-01 14:13 ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 03/22] virtio: add struct vp_device Gerd Hoffmann
2015-06-30 14:33 ` [Qemu-devel] [SeaBIOS] " Kevin O'Connor
2015-07-01 7:34 ` Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 04/22] virtio: pass struct pci_device to vp_init_simple Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 05/22] virtio: add version 1.0 structs and #defines Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 06/22] virtio: add version 0.9.5 struct Gerd Hoffmann
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 07/22] virtio: find version 1.0 virtio capabilities Gerd Hoffmann
2015-07-01 11:43 ` Michael S. Tsirkin
2015-07-01 12:24 ` Gerd Hoffmann
2015-07-01 12:28 ` Michael S. Tsirkin
2015-07-01 12:49 ` Gerd Hoffmann
2015-07-01 13:49 ` Michael S. Tsirkin
2015-06-30 8:38 ` [Qemu-devel] [PATCH v2 08/22] virtio: create vp_cap struct for legacy bar Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 09/22] virtio: add version 0.9.5 struct [fixup] Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 10/22] virtio: add read/write functions and macros Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 11/22] virtio: make features 64bit, support version 1.0 features Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 12/22] virtio: add version 1.0 support to vp_{get, set}_status Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 13/22] virtio: add version 1.0 support to vp_get_isr Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 14/22] virtio: add version 1.0 support to vp_reset Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 15/22] virtio: add version 1.0 support to vp_notify Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 16/22] virtio: remove unused vp_del_vq Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 17/22] virtio: add version 1.0 support to vp_find_vq Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 18/22] virtio-scsi: fix initialization for version 1.0 Gerd Hoffmann
2015-06-30 8:39 ` Gerd Hoffmann [this message]
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 20/22] virtio: use version 1.0 if available (flip the big switch) Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 21/22] virtio: also probe version 1.0 pci ids Gerd Hoffmann
2015-06-30 8:39 ` [Qemu-devel] [PATCH v2 22/22] virtio: legacy cleanup Gerd Hoffmann
2015-07-01 11:48 ` [Qemu-devel] [PATCH v2 00/22] virtio: add version 1.0 support Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435653553-7728-20-git-send-email-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=seabios@seabios.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).