From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, jsnow@redhat.com
Subject: [Qemu-devel] [PULL 05/35] ahci: Rename NCQFIS structure fields
Date: Sat, 4 Jul 2015 02:06:44 -0400 [thread overview]
Message-ID: <1435990034-8945-6-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1435990034-8945-1-git-send-email-jsnow@redhat.com>
Several fields of the NCQFIS structure are ambiguously named. This patch
clarifies the intended (if unsupported) usage of the NCQ fields to aid
in creating more meaningful debug messages through the NCQ codepaths.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435016308-6150-2-git-send-email-jsnow@redhat.com
---
hw/ide/ahci.h | 35 +++++++++++++++++++++++++----------
1 file changed, 25 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index 501c002..6d167f2 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -195,6 +195,9 @@
#define RECEIVE_FPDMA_QUEUED 0x65
#define SEND_FPDMA_QUEUED 0x64
+#define NCQ_FIS_FUA_MASK 0x80
+#define NCQ_FIS_RARC_MASK 0x01
+
#define RES_FIS_DSFIS 0x00
#define RES_FIS_PSFIS 0x20
#define RES_FIS_RFIS 0x40
@@ -312,27 +315,39 @@ extern const VMStateDescription vmstate_ahci;
.offset = vmstate_offset_value(_state, _field, AHCIState), \
}
+/**
+ * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
+ * but some fields have been re-mapped and re-purposed, as seen in
+ * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
+ *
+ * cmd_fis[3], feature 7:0, becomes sector count 7:0.
+ * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
+ * cmd_fis[11], feature 15:8, becomes sector count 15:8.
+ * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
+ * cmd_fis[13], count 15:8, becomes the priority value (7:6)
+ * bytes 16-19 become an le32 "auxiliary" field.
+ */
typedef struct NCQFrame {
uint8_t fis_type;
uint8_t c;
uint8_t command;
- uint8_t sector_count_low;
+ uint8_t sector_count_low; /* (feature 7:0) */
uint8_t lba0;
uint8_t lba1;
uint8_t lba2;
- uint8_t fua;
+ uint8_t fua; /* (device 7:0) */
uint8_t lba3;
uint8_t lba4;
uint8_t lba5;
- uint8_t sector_count_high;
- uint8_t tag;
- uint8_t reserved5;
- uint8_t reserved6;
+ uint8_t sector_count_high; /* (feature 15:8) */
+ uint8_t tag; /* (count 0:7) */
+ uint8_t prio; /* (count 15:8) */
+ uint8_t icc;
uint8_t control;
- uint8_t reserved7;
- uint8_t reserved8;
- uint8_t reserved9;
- uint8_t reserved10;
+ uint8_t aux0;
+ uint8_t aux1;
+ uint8_t aux2;
+ uint8_t aux3;
} QEMU_PACKED NCQFrame;
typedef struct SDBFIS {
--
2.1.0
next prev parent reply other threads:[~2015-07-04 6:07 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-04 6:06 [Qemu-devel] [PULL 00/35] Ide patches John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 01/35] ahci: Do not ignore memory access read size John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 02/35] qtest/ahci: add test_max John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 03/35] libqos/ahci: fix memory management bugs John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 04/35] qtest/ahci: add port_reset test John Snow
2015-07-04 6:06 ` John Snow [this message]
2015-07-04 6:06 ` [Qemu-devel] [PULL 06/35] ahci: use shorter variables John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 07/35] ahci: add ncq_err helper John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 08/35] ahci: check for ncq prdtl overflow John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 09/35] ahci: separate prdtl from opts John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 10/35] ahci: add ncq debug checks John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 11/35] ahci: ncq sector count correction John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 12/35] ahci/qtest: Execute IDENTIFY prior to data commands John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 13/35] libqos/ahci: fix cmd_sanity for ncq John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 14/35] libqos/ahci: add NCQ frame support John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 15/35] libqos/ahci: edit wait to be ncq aware John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 16/35] libqos/ahci: adjust expected NCQ interrupts John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 17/35] libqos/ahci: set the NCQ tag on command_commit John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 18/35] libqos/ahci: Force all NCQ commands to be LBA48 John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 19/35] qtest/ahci: simple ncq data test John Snow
2015-07-04 6:06 ` [Qemu-devel] [PULL 20/35] qtest/ahci: ncq migration test John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 21/35] ide: add limit to .prepare_buf() John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 22/35] ahci: stash ncq command John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 23/35] ahci: assert is_ncq for process_ncq John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 24/35] ahci: refactor process_ncq_command John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 25/35] ahci: factor ncq_finish out of ncq_cb John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 26/35] ahci: add rwerror=stop support for ncq John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 27/35] ahci: correct types in NCQTransferState John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 28/35] ahci: correct ncq sector count John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 29/35] qtest/ahci: halted NCQ test John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 30/35] ahci: add cmd header to ncq transfer state John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 31/35] ahci: add get_cmd_header helper John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 32/35] ahci: ncq migration John Snow
2015-07-09 14:11 ` Paolo Bonzini
2015-07-04 6:07 ` [Qemu-devel] [PULL 33/35] ahci: Do not map cmd_fis to generate response John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 34/35] qtest/ahci: halted ncq migration test John Snow
2015-07-04 6:07 ` [Qemu-devel] [PULL 35/35] ahci: fix sdb fis semantics John Snow
2015-07-05 21:01 ` [Qemu-devel] [PULL 00/35] Ide patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435990034-8945-6-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).