From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
Michael Roth <mdroth@linux.vnet.ibm.com>,
Gavin Shan <gwshan@linux.vnet.ibm.com>,
Alex Williamson <alex.williamson@redhat.com>,
qemu-ppc@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH qemu v10 11/14] spapr_pci_vfio: Enable multiple groups per container
Date: Mon, 6 Jul 2015 12:11:07 +1000 [thread overview]
Message-ID: <1436148670-6592-12-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1436148670-6592-1-git-send-email-aik@ozlabs.ru>
This enables multiple IOMMU groups in one VFIO container which means
that multiple devices from different groups can share the same IOMMU
table (or tables if DDW).
This removes a group id from vfio_container_ioctl(). The kernel support
is required for this; if the host kernel does not have the support,
it will allow only one group per container. The PHB's "iommuid" property
is ignored. The ioctl is called for every container attached to
the address space. At the moment there is just one container anyway.
If there is no container attached to the address space,
vfio_container_do_ioctl() returns -1.
This removes casts to sPAPRPHBVFIOState as none of sPAPRPHBVFIOState
members is accessed here.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
hw/ppc/spapr_pci_vfio.c | 17 ++++++-----------
hw/vfio/common.c | 20 ++++++--------------
include/hw/vfio/vfio.h | 2 +-
3 files changed, 13 insertions(+), 26 deletions(-)
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index 04ca4cf..fe7d7d1 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -33,7 +33,7 @@ int spapr_phb_vfio_dma_capabilities_update(sPAPRPHBState *sphb)
struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
int ret;
- ret = vfio_container_ioctl(&sphb->iommu_as, sphb->iommugroupid,
+ ret = vfio_container_ioctl(&sphb->iommu_as,
VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
if (ret) {
return ret;
@@ -59,8 +59,7 @@ void spapr_phb_vfio_eeh_reenable(sPAPRPHBState *sphb)
* ensures that the contained PCI devices will work properly
* after reboot.
*/
- vfio_container_ioctl(&sphb->iommu_as,
- sphb->iommugroupid, VFIO_EEH_PE_OP, &op);
+ vfio_container_ioctl(&sphb->iommu_as, VFIO_EEH_PE_OP, &op);
}
int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
@@ -86,8 +85,7 @@ int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
return RTAS_OUT_PARAM_ERROR;
}
- ret = vfio_container_ioctl(&sphb->iommu_as, sphb->iommugroupid,
- VFIO_EEH_PE_OP, &op);
+ ret = vfio_container_ioctl(&sphb->iommu_as, VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_HW_ERROR;
}
@@ -101,8 +99,7 @@ int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
int ret;
op.op = VFIO_EEH_PE_GET_STATE;
- ret = vfio_container_ioctl(&sphb->iommu_as, sphb->iommugroupid,
- VFIO_EEH_PE_OP, &op);
+ ret = vfio_container_ioctl(&sphb->iommu_as, VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_PARAM_ERROR;
}
@@ -175,8 +172,7 @@ int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
return RTAS_OUT_PARAM_ERROR;
}
- ret = vfio_container_ioctl(&sphb->iommu_as, sphb->iommugroupid,
- VFIO_EEH_PE_OP, &op);
+ ret = vfio_container_ioctl(&sphb->iommu_as, VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_HW_ERROR;
}
@@ -190,8 +186,7 @@ int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
int ret;
op.op = VFIO_EEH_PE_CONFIGURE;
- ret = vfio_container_ioctl(&sphb->iommu_as, sphb->iommugroupid,
- VFIO_EEH_PE_OP, &op);
+ ret = vfio_container_ioctl(&sphb->iommu_as, VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_PARAM_ERROR;
}
diff --git a/hw/vfio/common.c b/hw/vfio/common.c
index b1045da..89ef37b 100644
--- a/hw/vfio/common.c
+++ b/hw/vfio/common.c
@@ -918,34 +918,26 @@ void vfio_put_base_device(VFIODevice *vbasedev)
close(vbasedev->fd);
}
-static int vfio_container_do_ioctl(AddressSpace *as, int32_t groupid,
+static int vfio_container_do_ioctl(AddressSpace *as,
int req, void *param)
{
- VFIOGroup *group;
VFIOContainer *container;
int ret = -1;
+ VFIOAddressSpace *space = vfio_get_address_space(as);
- group = vfio_get_group(groupid, as);
- if (!group) {
- error_report("vfio: group %d not registered", groupid);
- return ret;
- }
-
- container = group->container;
- if (group->container) {
+ QLIST_FOREACH(container, &space->containers, next) {
ret = ioctl(container->fd, req, param);
if (ret < 0) {
error_report("vfio: failed to ioctl %d to container: ret=%d, %s",
_IOC_NR(req) - VFIO_BASE, ret, strerror(errno));
+ return -errno;
}
}
- vfio_put_group(group);
-
return ret;
}
-int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
+int vfio_container_ioctl(AddressSpace *as,
int req, void *param)
{
/* We allow only certain ioctls to the container */
@@ -960,5 +952,5 @@ int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
return -1;
}
- return vfio_container_do_ioctl(as, groupid, req, param);
+ return vfio_container_do_ioctl(as, req, param);
}
diff --git a/include/hw/vfio/vfio.h b/include/hw/vfio/vfio.h
index 0b26cd8..76b5744 100644
--- a/include/hw/vfio/vfio.h
+++ b/include/hw/vfio/vfio.h
@@ -3,7 +3,7 @@
#include "qemu/typedefs.h"
-extern int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
+extern int vfio_container_ioctl(AddressSpace *as,
int req, void *param);
#endif
--
2.4.0.rc3.8.gfb3e7d5
next prev parent reply other threads:[~2015-07-06 2:12 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 2:10 [Qemu-devel] [PATCH qemu v10 00/14] spapr: vfio: Enable Dynamic DMA windows (DDW) Alexey Kardashevskiy
2015-07-06 2:10 ` [Qemu-devel] [PATCH qemu v10 01/14] linux-headers: Update to 4.2-rc1 Alexey Kardashevskiy
2015-07-06 11:18 ` Paolo Bonzini
2015-07-06 2:10 ` [Qemu-devel] [PATCH qemu v10 02/14] vmstate: Define VARRAY with VMS_ALLOC Alexey Kardashevskiy
2015-07-06 14:21 ` Thomas Huth
2015-07-06 2:10 ` [Qemu-devel] [PATCH qemu v10 03/14] spapr_pci: Convert finish_realize() to dma_capabilities_update()+dma_init_window() Alexey Kardashevskiy
2015-07-06 16:41 ` Laurent Vivier
2015-07-07 0:28 ` Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 04/14] spapr_iommu: Move table allocation to helpers Alexey Kardashevskiy
2015-07-06 15:14 ` Thomas Huth
2015-07-06 15:43 ` Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 05/14] spapr_iommu: Introduce "enabled" state for TCE table Alexey Kardashevskiy
2015-07-06 10:07 ` David Gibson
2015-07-06 17:04 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 06/14] spapr_iommu: Remove vfio_accel flag from sPAPRTCETable Alexey Kardashevskiy
2015-07-06 16:45 ` Laurent Vivier
2015-07-06 17:11 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 07/14] spapr_iommu: Add root memory region Alexey Kardashevskiy
2015-07-06 19:15 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 08/14] spapr_pci: Do complete reset of DMA config when resetting PHB Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 09/14] spapr_vfio_pci: Remove redundant spapr-pci-vfio-host-bridge Alexey Kardashevskiy
2015-07-06 21:13 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 10/14] spapr_pci: Enable vfio-pci hotplug Alexey Kardashevskiy
2015-07-06 10:27 ` David Gibson
2015-07-06 21:31 ` Thomas Huth
2015-07-07 9:28 ` Alexey Kardashevskiy
2015-07-10 21:33 ` Michael Roth
2015-07-12 4:59 ` Alexey Kardashevskiy
2015-07-12 14:41 ` Michael Roth
2015-07-13 1:10 ` David Gibson
2015-07-13 7:06 ` Alexey Kardashevskiy
2015-07-06 2:11 ` Alexey Kardashevskiy [this message]
2015-07-07 7:02 ` [Qemu-devel] [PATCH qemu v10 11/14] spapr_pci_vfio: Enable multiple groups per container Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 12/14] vfio: Unregister IOMMU notifiers when container is destroyed Alexey Kardashevskiy
2015-07-06 10:33 ` David Gibson
2015-07-06 12:49 ` Alex Williamson
2015-07-06 12:59 ` Alexey Kardashevskiy
2015-07-06 13:45 ` Alex Williamson
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 13/14] vfio: spapr: Add SPAPR IOMMU v2 support (DMA memory preregistering) Alexey Kardashevskiy
2015-07-06 13:42 ` Alex Williamson
2015-07-06 15:34 ` Alexey Kardashevskiy
2015-07-06 16:13 ` Alex Williamson
2015-07-07 0:29 ` David Gibson
2015-07-07 0:36 ` Alexey Kardashevskiy
2015-07-07 12:11 ` Alexey Kardashevskiy
2015-07-07 16:24 ` Alex Williamson
2015-07-08 6:26 ` Alexey Kardashevskiy
2015-07-08 14:51 ` Alex Williamson
2015-07-07 7:23 ` Thomas Huth
2015-07-07 10:05 ` Alexey Kardashevskiy
2015-07-07 10:21 ` Thomas Huth
2015-07-07 11:05 ` Alexey Kardashevskiy
2015-07-08 4:30 ` David Gibson
2015-07-08 6:24 ` Thomas Huth
2015-07-08 6:50 ` David Gibson
2015-07-08 7:07 ` Alexey Kardashevskiy
2015-07-08 14:47 ` Alex Williamson
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 14/14] spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW) Alexey Kardashevskiy
2015-07-06 11:06 ` David Gibson
2015-07-06 11:27 ` Alexey Kardashevskiy
2015-07-07 9:46 ` Alexey Kardashevskiy
2015-07-07 4:58 ` David Gibson
2015-07-07 9:33 ` Thomas Huth
2015-07-07 10:43 ` Alexey Kardashevskiy
2015-07-07 11:35 ` Thomas Huth
2015-07-07 11:53 ` Alexey Kardashevskiy
2015-07-06 11:13 ` [Qemu-devel] [PATCH qemu v10 00/14] spapr: vfio: Enable Dynamic DMA windows (DDW) David Gibson
2015-07-06 15:54 ` Thomas Huth
2015-07-06 16:07 ` Alexey Kardashevskiy
2015-07-06 16:13 ` Thomas Huth
2015-07-08 4:34 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436148670-6592-12-git-send-email-aik@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=gwshan@linux.vnet.ibm.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).