From: Alexey Kardashevskiy <aik@ozlabs.ru>
To: qemu-devel@nongnu.org
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>,
Michael Roth <mdroth@linux.vnet.ibm.com>,
Gavin Shan <gwshan@linux.vnet.ibm.com>,
Alex Williamson <alex.williamson@redhat.com>,
qemu-ppc@nongnu.org, David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PATCH qemu v10 03/14] spapr_pci: Convert finish_realize() to dma_capabilities_update()+dma_init_window()
Date: Mon, 6 Jul 2015 12:10:59 +1000 [thread overview]
Message-ID: <1436148670-6592-4-git-send-email-aik@ozlabs.ru> (raw)
In-Reply-To: <1436148670-6592-1-git-send-email-aik@ozlabs.ru>
This reworks finish_realize() which used to finalize DMA setup with
an assumption that it will not change later.
New callbacks supports various window parameters such as page and
windows sizes. The new callback return error code rather than Error**.
This is a mechanical change so no change in behaviour is expected.
This is a part of getting rid of spapr-pci-vfio-host-bridge type.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
Changes:
v8:
* moved spapr_phb_dma_capabilities_update() higher to avoid forward
declaration in following patches and keep DMA code together (i.e. next
to spapr_pci_dma_iommu())
---
hw/ppc/spapr_pci.c | 59 ++++++++++++++++++++++++++-------------------
hw/ppc/spapr_pci_vfio.c | 53 ++++++++++++++++------------------------
include/hw/pci-host/spapr.h | 8 +++++-
3 files changed, 62 insertions(+), 58 deletions(-)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index a8f79d8..c1ca13d 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -808,6 +808,28 @@ static char *spapr_phb_get_loc_code(sPAPRPHBState *sphb, PCIDevice *pdev)
return buf;
}
+static int spapr_phb_dma_capabilities_update(sPAPRPHBState *sphb)
+{
+ sphb->dma32_window_start = 0;
+ sphb->dma32_window_size = SPAPR_PCI_DMA32_SIZE;
+
+ return 0;
+}
+
+static int spapr_phb_dma_init_window(sPAPRPHBState *sphb,
+ uint32_t liobn, uint32_t page_shift,
+ uint64_t window_size)
+{
+ uint64_t bus_offset = sphb->dma32_window_start;
+ sPAPRTCETable *tcet;
+
+ tcet = spapr_tce_new_table(DEVICE(sphb), liobn, bus_offset, page_shift,
+ window_size >> page_shift,
+ false);
+
+ return tcet ? 0 : -1;
+}
+
/* Macros to operate with address in OF binding to PCI */
#define b_x(x, p, l) (((x) & ((1<<(l))-1)) << (p))
#define b_n(x) b_x((x), 31, 1) /* 0 if relocatable */
@@ -1220,6 +1242,7 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
int i;
PCIBus *bus;
uint64_t msi_window_size = 4096;
+ sPAPRTCETable *tcet;
if (sphb->index != (uint32_t)-1) {
hwaddr windows_base;
@@ -1369,33 +1392,18 @@ static void spapr_phb_realize(DeviceState *dev, Error **errp)
}
}
- if (!info->finish_realize) {
- error_setg(errp, "finish_realize not defined");
- return;
- }
-
- info->finish_realize(sphb, errp);
-
- sphb->msi = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free);
-}
-
-static void spapr_phb_finish_realize(sPAPRPHBState *sphb, Error **errp)
-{
- sPAPRTCETable *tcet;
- uint32_t nb_table;
-
- nb_table = SPAPR_PCI_DMA32_SIZE >> SPAPR_TCE_PAGE_SHIFT;
- tcet = spapr_tce_new_table(DEVICE(sphb), sphb->dma_liobn,
- 0, SPAPR_TCE_PAGE_SHIFT, nb_table, false);
+ info->dma_capabilities_update(sphb);
+ info->dma_init_window(sphb, sphb->dma_liobn, SPAPR_TCE_PAGE_SHIFT,
+ sphb->dma32_window_size);
+ tcet = spapr_tce_find_by_liobn(sphb->dma_liobn);
if (!tcet) {
- error_setg(errp, "Unable to create TCE table for %s",
- sphb->dtbusname);
- return ;
+ error_setg(errp, "failed to create TCE table");
+ return;
}
-
- /* Register default 32bit DMA window */
- memory_region_add_subregion(&sphb->iommu_root, 0,
+ memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset,
spapr_tce_get_iommu(tcet));
+
+ sphb->msi = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free);
}
static int spapr_phb_children_reset(Object *child, void *opaque)
@@ -1543,9 +1551,10 @@ static void spapr_phb_class_init(ObjectClass *klass, void *data)
dc->vmsd = &vmstate_spapr_pci;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->cannot_instantiate_with_device_add_yet = false;
- spc->finish_realize = spapr_phb_finish_realize;
hp->plug = spapr_phb_hot_plug_child;
hp->unplug = spapr_phb_hot_unplug_child;
+ spc->dma_capabilities_update = spapr_phb_dma_capabilities_update;
+ spc->dma_init_window = spapr_phb_dma_init_window;
}
static const TypeInfo spapr_phb_info = {
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index cca45ed..6e3e17b 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -28,48 +28,36 @@ static Property spapr_phb_vfio_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
-static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
+static int spapr_phb_vfio_dma_capabilities_update(sPAPRPHBState *sphb)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
int ret;
- sPAPRTCETable *tcet;
- uint32_t liobn = svphb->phb.dma_liobn;
- if (svphb->iommugroupid == -1) {
- error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid);
- return;
- }
-
- ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
- VFIO_CHECK_EXTENSION,
- (void *) VFIO_SPAPR_TCE_IOMMU);
- if (ret != 1) {
- error_setg_errno(errp, -ret,
- "spapr-vfio: SPAPR extension is not supported");
- return;
- }
-
- ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+ ret = vfio_container_ioctl(&sphb->iommu_as, svphb->iommugroupid,
VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
if (ret) {
- error_setg_errno(errp, -ret,
- "spapr-vfio: get info from container failed");
- return;
+ return ret;
}
- tcet = spapr_tce_new_table(DEVICE(sphb), liobn, info.dma32_window_start,
- SPAPR_TCE_PAGE_SHIFT,
- info.dma32_window_size >> SPAPR_TCE_PAGE_SHIFT,
+ sphb->dma32_window_start = info.dma32_window_start;
+ sphb->dma32_window_size = info.dma32_window_size;
+
+ return ret;
+}
+
+static int spapr_phb_vfio_dma_init_window(sPAPRPHBState *sphb,
+ uint32_t liobn, uint32_t page_shift,
+ uint64_t window_size)
+{
+ uint64_t bus_offset = sphb->dma32_window_start;
+ sPAPRTCETable *tcet;
+
+ tcet = spapr_tce_new_table(DEVICE(sphb), liobn, bus_offset, page_shift,
+ window_size >> page_shift,
true);
- if (!tcet) {
- error_setg(errp, "spapr-vfio: failed to create VFIO TCE table");
- return;
- }
- /* Register default 32bit DMA window */
- memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset,
- spapr_tce_get_iommu(tcet));
+ return tcet ? 0 : -1;
}
static void spapr_phb_vfio_eeh_reenable(sPAPRPHBVFIOState *svphb)
@@ -257,7 +245,8 @@ static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
dc->props = spapr_phb_vfio_properties;
dc->reset = spapr_phb_vfio_reset;
- spc->finish_realize = spapr_phb_vfio_finish_realize;
+ spc->dma_capabilities_update = spapr_phb_vfio_dma_capabilities_update;
+ spc->dma_init_window = spapr_phb_vfio_dma_init_window;
spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
spc->eeh_get_state = spapr_phb_vfio_eeh_get_state;
spc->eeh_reset = spapr_phb_vfio_eeh_reset;
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index 5322b56..b6d5719 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -48,7 +48,10 @@ typedef struct sPAPRPHBVFIOState sPAPRPHBVFIOState;
struct sPAPRPHBClass {
PCIHostBridgeClass parent_class;
- void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
+ int (*dma_capabilities_update)(sPAPRPHBState *sphb);
+ int (*dma_init_window)(sPAPRPHBState *sphb,
+ uint32_t liobn, uint32_t page_shift,
+ uint64_t window_size);
int (*eeh_set_option)(sPAPRPHBState *sphb, unsigned int addr, int option);
int (*eeh_get_state)(sPAPRPHBState *sphb, int *state);
int (*eeh_reset)(sPAPRPHBState *sphb, int option);
@@ -90,6 +93,9 @@ struct sPAPRPHBState {
int32_t msi_devs_num;
spapr_pci_msi_mig *msi_devs;
+ uint32_t dma32_window_start;
+ uint32_t dma32_window_size;
+
QLIST_ENTRY(sPAPRPHBState) list;
};
--
2.4.0.rc3.8.gfb3e7d5
next prev parent reply other threads:[~2015-07-06 2:12 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 2:10 [Qemu-devel] [PATCH qemu v10 00/14] spapr: vfio: Enable Dynamic DMA windows (DDW) Alexey Kardashevskiy
2015-07-06 2:10 ` [Qemu-devel] [PATCH qemu v10 01/14] linux-headers: Update to 4.2-rc1 Alexey Kardashevskiy
2015-07-06 11:18 ` Paolo Bonzini
2015-07-06 2:10 ` [Qemu-devel] [PATCH qemu v10 02/14] vmstate: Define VARRAY with VMS_ALLOC Alexey Kardashevskiy
2015-07-06 14:21 ` Thomas Huth
2015-07-06 2:10 ` Alexey Kardashevskiy [this message]
2015-07-06 16:41 ` [Qemu-devel] [PATCH qemu v10 03/14] spapr_pci: Convert finish_realize() to dma_capabilities_update()+dma_init_window() Laurent Vivier
2015-07-07 0:28 ` Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 04/14] spapr_iommu: Move table allocation to helpers Alexey Kardashevskiy
2015-07-06 15:14 ` Thomas Huth
2015-07-06 15:43 ` Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 05/14] spapr_iommu: Introduce "enabled" state for TCE table Alexey Kardashevskiy
2015-07-06 10:07 ` David Gibson
2015-07-06 17:04 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 06/14] spapr_iommu: Remove vfio_accel flag from sPAPRTCETable Alexey Kardashevskiy
2015-07-06 16:45 ` Laurent Vivier
2015-07-06 17:11 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 07/14] spapr_iommu: Add root memory region Alexey Kardashevskiy
2015-07-06 19:15 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 08/14] spapr_pci: Do complete reset of DMA config when resetting PHB Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 09/14] spapr_vfio_pci: Remove redundant spapr-pci-vfio-host-bridge Alexey Kardashevskiy
2015-07-06 21:13 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 10/14] spapr_pci: Enable vfio-pci hotplug Alexey Kardashevskiy
2015-07-06 10:27 ` David Gibson
2015-07-06 21:31 ` Thomas Huth
2015-07-07 9:28 ` Alexey Kardashevskiy
2015-07-10 21:33 ` Michael Roth
2015-07-12 4:59 ` Alexey Kardashevskiy
2015-07-12 14:41 ` Michael Roth
2015-07-13 1:10 ` David Gibson
2015-07-13 7:06 ` Alexey Kardashevskiy
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 11/14] spapr_pci_vfio: Enable multiple groups per container Alexey Kardashevskiy
2015-07-07 7:02 ` Thomas Huth
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 12/14] vfio: Unregister IOMMU notifiers when container is destroyed Alexey Kardashevskiy
2015-07-06 10:33 ` David Gibson
2015-07-06 12:49 ` Alex Williamson
2015-07-06 12:59 ` Alexey Kardashevskiy
2015-07-06 13:45 ` Alex Williamson
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 13/14] vfio: spapr: Add SPAPR IOMMU v2 support (DMA memory preregistering) Alexey Kardashevskiy
2015-07-06 13:42 ` Alex Williamson
2015-07-06 15:34 ` Alexey Kardashevskiy
2015-07-06 16:13 ` Alex Williamson
2015-07-07 0:29 ` David Gibson
2015-07-07 0:36 ` Alexey Kardashevskiy
2015-07-07 12:11 ` Alexey Kardashevskiy
2015-07-07 16:24 ` Alex Williamson
2015-07-08 6:26 ` Alexey Kardashevskiy
2015-07-08 14:51 ` Alex Williamson
2015-07-07 7:23 ` Thomas Huth
2015-07-07 10:05 ` Alexey Kardashevskiy
2015-07-07 10:21 ` Thomas Huth
2015-07-07 11:05 ` Alexey Kardashevskiy
2015-07-08 4:30 ` David Gibson
2015-07-08 6:24 ` Thomas Huth
2015-07-08 6:50 ` David Gibson
2015-07-08 7:07 ` Alexey Kardashevskiy
2015-07-08 14:47 ` Alex Williamson
2015-07-06 2:11 ` [Qemu-devel] [PATCH qemu v10 14/14] spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW) Alexey Kardashevskiy
2015-07-06 11:06 ` David Gibson
2015-07-06 11:27 ` Alexey Kardashevskiy
2015-07-07 9:46 ` Alexey Kardashevskiy
2015-07-07 4:58 ` David Gibson
2015-07-07 9:33 ` Thomas Huth
2015-07-07 10:43 ` Alexey Kardashevskiy
2015-07-07 11:35 ` Thomas Huth
2015-07-07 11:53 ` Alexey Kardashevskiy
2015-07-06 11:13 ` [Qemu-devel] [PATCH qemu v10 00/14] spapr: vfio: Enable Dynamic DMA windows (DDW) David Gibson
2015-07-06 15:54 ` Thomas Huth
2015-07-06 16:07 ` Alexey Kardashevskiy
2015-07-06 16:13 ` Thomas Huth
2015-07-08 4:34 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436148670-6592-4-git-send-email-aik@ozlabs.ru \
--to=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=gwshan@linux.vnet.ibm.com \
--cc=mdroth@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).