From: Frediano Ziglio <fziglio@redhat.com>
To: kraxel@redhat.com, spice-devel@lists.freedesktop.org,
berrange@redhat.com
Cc: qemu-devel@nongnu.org, Frediano Ziglio <fziglio@redhat.com>
Subject: [Qemu-devel] [PATCH v3] qxl: allow to specify head limit to qxl driver
Date: Mon, 6 Jul 2015 07:56:38 +0100 [thread overview]
Message-ID: <1436165798-635-1-git-send-email-fziglio@redhat.com> (raw)
This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.
libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).
This patch rely on some change in spice-protocol which are not still
accepted. See
http://lists.freedesktop.org/archives/spice-devel/2015-June/020221.html.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
---
hw/display/qxl.c | 26 +++++++++++++++++++++-----
hw/display/qxl.h | 3 +++
2 files changed, 24 insertions(+), 5 deletions(-)
Changes from v2:
- removed the RPC after spice-server upstream
- rebased
diff --git a/hw/display/qxl.c b/hw/display/qxl.c
index f87a5ee..4e5ff69 100644
--- a/hw/display/qxl.c
+++ b/hw/display/qxl.c
@@ -271,6 +271,12 @@ static void qxl_spice_monitors_config_async(PCIQXLDevice *qxl, int replay)
QXL_COOKIE_TYPE_POST_LOAD_MONITORS_CONFIG,
0));
} else {
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ if (qxl->max_outputs) {
+ spice_qxl_set_monitors_config_limit(&qxl->ssd.qxl,
+ qxl->max_outputs);
+ }
+#endif
qxl->guest_monitors_config = qxl->ram->monitors_config;
spice_qxl_monitors_config_async(&qxl->ssd.qxl,
qxl->ram->monitors_config,
@@ -991,6 +997,7 @@ static int interface_client_monitors_config(QXLInstance *sin,
PCIQXLDevice *qxl = container_of(sin, PCIQXLDevice, ssd.qxl);
QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
int i;
+ unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
if (qxl->revision < 4) {
trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
@@ -1013,17 +1020,23 @@ static int interface_client_monitors_config(QXLInstance *sin,
if (!monitors_config) {
return 1;
}
+
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ /* limit number of outputs based on setting limit */
+ if (qxl->max_outputs && qxl->max_outputs <= max_outputs) {
+ max_outputs = qxl->max_outputs;
+ }
+#endif
+
memset(&rom->client_monitors_config, 0,
sizeof(rom->client_monitors_config));
rom->client_monitors_config.count = monitors_config->num_of_monitors;
/* monitors_config->flags ignored */
- if (rom->client_monitors_config.count >=
- ARRAY_SIZE(rom->client_monitors_config.heads)) {
+ if (rom->client_monitors_config.count >= max_outputs) {
trace_qxl_client_monitors_config_capped(qxl->id,
monitors_config->num_of_monitors,
- ARRAY_SIZE(rom->client_monitors_config.heads));
- rom->client_monitors_config.count =
- ARRAY_SIZE(rom->client_monitors_config.heads);
+ max_outputs);
+ rom->client_monitors_config.count = max_outputs;
}
for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
VDAgentMonConfig *monitor = &monitors_config->monitors[i];
@@ -2274,6 +2287,9 @@ static Property qxl_properties[] = {
DEFINE_PROP_UINT32("vram64_size_mb", PCIQXLDevice, vram_size_mb, -1),
DEFINE_PROP_UINT32("vgamem_mb", PCIQXLDevice, vgamem_size_mb, 16),
DEFINE_PROP_INT32("surfaces", PCIQXLDevice, ssd.num_surfaces, 1024),
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ DEFINE_PROP_UINT16("max_outputs", PCIQXLDevice, max_outputs, 0),
+#endif
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/display/qxl.h b/hw/display/qxl.h
index deddd54..2ddf065 100644
--- a/hw/display/qxl.h
+++ b/hw/display/qxl.h
@@ -99,6 +99,9 @@ typedef struct PCIQXLDevice {
QXLModes *modes;
uint32_t rom_size;
MemoryRegion rom_bar;
+#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
+ uint16_t max_outputs;
+#endif
/* vram pci bar */
uint32_t vram_size;
--
2.1.0
next reply other threads:[~2015-07-06 6:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 6:56 Frediano Ziglio [this message]
2015-07-13 11:32 ` [Qemu-devel] [PATCH v3] qxl: allow to specify head limit to qxl driver Frediano Ziglio
2015-07-14 13:41 ` Gerd Hoffmann
2015-07-14 14:13 ` Frediano Ziglio
2015-07-19 15:01 ` [Qemu-devel] [Spice-devel] " Pavel Grunt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436165798-635-1-git-send-email-fziglio@redhat.com \
--to=fziglio@redhat.com \
--cc=berrange@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=spice-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).