[Qemu-devel] [PULL v2 12/16] pcie: Set the "link active" in the link status register

["Michael S. Tsirkin" <mst@redhat.com>]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Some firmwares can test that and assume the device hasn't come
up if that bit isn't set

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 hw/pci/pcie.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 14c7711..6e28985 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -78,7 +78,7 @@ int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
                  PCI_EXP_LNK_LS_25);
 
     pci_set_word(exp_cap + PCI_EXP_LNKSTA,
-                 PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25);
+                 PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25 |PCI_EXP_LNKSTA_DLLLA);
 
     pci_set_long(exp_cap + PCI_EXP_DEVCAP2,
                  PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP);
-- 
MST