From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Jan Tomko <jtomko@redhat.com>,
Eduardo Habkost <ehabkost@redhat.com>,
Laszlo Ersek <lersek@redhat.com>,
Markus Armbruster <armbru@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>, John Snow <jsnow@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: [Qemu-devel] [PULL v2 07/16] hw/i386/pc: factor out pc_cmos_init_floppy()
Date: Wed, 8 Jul 2015 12:41:47 +0300 [thread overview]
Message-ID: <1436348444-907-8-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1436348444-907-1-git-send-email-mst@redhat.com>
From: Laszlo Ersek <lersek@redhat.com>
Extract the pc_cmos_init_floppy() function from pc_cmos_init(). The
function sets two RTC registers: floppy drive types (0x10), overwriting
the earlier value in there), and REG_EQUIPMENT_BYTE (0x14), setting bits
in the prior value.
Cc: Jan Tomko <jtomko@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/i386/pc.c | 67 ++++++++++++++++++++++++++++++++++--------------------------
1 file changed, 38 insertions(+), 29 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 7959b44..6f1b137 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -293,6 +293,42 @@ static void pc_boot_set(void *opaque, const char *boot_device, Error **errp)
set_boot_dev(opaque, boot_device, errp);
}
+static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy)
+{
+ int val, nb, i;
+ FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
+
+ /* floppy type */
+ if (floppy) {
+ for (i = 0; i < 2; i++) {
+ fd_type[i] = isa_fdc_get_drive_type(floppy, i);
+ }
+ }
+ val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
+ cmos_get_fd_drive_type(fd_type[1]);
+ rtc_set_memory(rtc_state, 0x10, val);
+
+ val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE);
+ nb = 0;
+ if (fd_type[0] < FDRIVE_DRV_NONE) {
+ nb++;
+ }
+ if (fd_type[1] < FDRIVE_DRV_NONE) {
+ nb++;
+ }
+ switch (nb) {
+ case 0:
+ break;
+ case 1:
+ val |= 0x01; /* 1 drive, ready for boot */
+ break;
+ case 2:
+ val |= 0x41; /* 2 drives, ready for boot */
+ break;
+ }
+ rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val);
+}
+
typedef struct pc_cmos_init_late_arg {
ISADevice *rtc_state;
BusState *idebus[2];
@@ -343,8 +379,7 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
ISADevice *floppy, BusState *idebus0, BusState *idebus1,
ISADevice *s)
{
- int val, nb, i;
- FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
+ int val;
static pc_cmos_init_late_arg arg;
PCMachineState *pc_machine = PC_MACHINE(machine);
Error *local_err = NULL;
@@ -401,37 +436,11 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
exit(1);
}
- /* floppy type */
- if (floppy) {
- for (i = 0; i < 2; i++) {
- fd_type[i] = isa_fdc_get_drive_type(floppy, i);
- }
- }
- val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
- cmos_get_fd_drive_type(fd_type[1]);
- rtc_set_memory(s, 0x10, val);
-
val = 0;
- nb = 0;
- if (fd_type[0] < FDRIVE_DRV_NONE) {
- nb++;
- }
- if (fd_type[1] < FDRIVE_DRV_NONE) {
- nb++;
- }
- switch (nb) {
- case 0:
- break;
- case 1:
- val |= 0x01; /* 1 drive, ready for boot */
- break;
- case 2:
- val |= 0x41; /* 2 drives, ready for boot */
- break;
- }
val |= 0x02; /* FPU is there */
val |= 0x04; /* PS/2 mouse installed */
rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
+ pc_cmos_init_floppy(s, floppy);
/* hard drives */
arg.rtc_state = s;
--
MST
next prev parent reply other threads:[~2015-07-08 9:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:41 [Qemu-devel] [PULL v2 00/16] pc,virtio,pci: fixes and updates Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 01/16] dataplane: fix cross-endian issues Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 02/16] Revert "dataplane: allow virtio-1 devices" Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 03/16] acpi: split out ICH ACPI support Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 04/16] ich9: add TCO interface emulation Michael S. Tsirkin
2015-07-13 9:49 ` Amit Shah
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 05/16] tests: add testcase for TCO watchdog emulation Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 06/16] ich9: implement strap SPKR pin logic Michael S. Tsirkin
2015-07-08 9:41 ` Michael S. Tsirkin [this message]
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 08/16] hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS Michael S. Tsirkin
2015-07-08 9:41 ` [Qemu-devel] [PULL v2 09/16] hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init() Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 10/16] virtio_net: reuse constants from linux Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 11/16] pci_regs.h: import " Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 12/16] pcie: Set the "link active" in the link status register Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 13/16] virtio: define virtio_pci_cfg_cap in header Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 14/16] virtio-pci: implement cfg capability Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 15/16] virtio fix cfg endian-ness for BE targets Michael S. Tsirkin
2015-07-08 9:42 ` [Qemu-devel] [PULL v2 16/16] tco-test: fix up config accesses and re-enable Michael S. Tsirkin
2015-07-08 13:47 ` [Qemu-devel] [PULL v2 00/16] pc,virtio,pci: fixes and updates Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436348444-907-8-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=armbru@redhat.com \
--cc=ehabkost@redhat.com \
--cc=jsnow@redhat.com \
--cc=jtomko@redhat.com \
--cc=lersek@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).