From: Alvise Rigo <a.rigo@virtualopensystems.com>
To: qemu-devel@nongnu.org, mttcg@listserver.greensocs.com
Cc: alex.bennee@linaro.org, jani.kokkonen@huawei.com,
tech@virtualopensystems.com, claudio.fontana@huawei.com,
pbonzini@redhat.com
Subject: [Qemu-devel] [RFC v3 06/13] target-i386: translate: implement qemu_ldlink and qemu_stcond ops
Date: Fri, 10 Jul 2015 10:23:39 +0200 [thread overview]
Message-ID: <1436516626-8322-7-git-send-email-a.rigo@virtualopensystems.com> (raw)
In-Reply-To: <1436516626-8322-1-git-send-email-a.rigo@virtualopensystems.com>
Implement strex and ldrex instruction relying on TCG's qemu_ldlink and
qemu_stcond. For the time being only 32bit configurations are supported.
Suggested-by: Jani Kokkonen <jani.kokkonen@huawei.com>
Suggested-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
---
tcg/i386/tcg-target.c | 136 ++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 114 insertions(+), 22 deletions(-)
diff --git a/tcg/i386/tcg-target.c b/tcg/i386/tcg-target.c
index 0d7c99c..d8250a9 100644
--- a/tcg/i386/tcg-target.c
+++ b/tcg/i386/tcg-target.c
@@ -1141,6 +1141,17 @@ static void * const qemu_ld_helpers[16] = {
[MO_BEQ] = helper_be_ldq_mmu,
};
+/* LoadLink helpers, only unsigned. Use the macro below to access them. */
+static void * const qemu_ldex_helpers[16] = {
+ [MO_LEUL] = helper_le_ldlinkul_mmu,
+};
+
+#define LDEX_HELPER(mem_op) \
+({ \
+ assert(mem_op & MO_EXCL); \
+ qemu_ldex_helpers[((int)mem_op - MO_EXCL)]; \
+})
+
/* helper signature: helper_ret_st_mmu(CPUState *env, target_ulong addr,
* uintxx_t val, int mmu_idx, uintptr_t ra)
*/
@@ -1154,6 +1165,17 @@ static void * const qemu_st_helpers[16] = {
[MO_BEQ] = helper_be_stq_mmu,
};
+/* StoreConditional helpers. Use the macro below to access them. */
+static void * const qemu_stex_helpers[16] = {
+ [MO_LEUL] = helper_le_stcondl_mmu,
+};
+
+#define STEX_HELPER(mem_op) \
+({ \
+ assert(mem_op & MO_EXCL); \
+ qemu_stex_helpers[(int)mem_op - MO_EXCL]; \
+})
+
/* Perform the TLB load and compare.
Inputs:
@@ -1249,6 +1271,7 @@ static inline void tcg_out_tlb_load(TCGContext *s, TCGReg addrlo, TCGReg addrhi,
* for a load or store, so that we can later generate the correct helper code
*/
static void add_qemu_ldst_label(TCGContext *s, bool is_ld, TCGMemOpIdx oi,
+ TCGReg llsc_success,
TCGReg datalo, TCGReg datahi,
TCGReg addrlo, TCGReg addrhi,
tcg_insn_unit *raddr,
@@ -1257,6 +1280,7 @@ static void add_qemu_ldst_label(TCGContext *s, bool is_ld, TCGMemOpIdx oi,
TCGLabelQemuLdst *label = new_ldst_label(s);
label->is_ld = is_ld;
+ label->llsc_success = llsc_success;
label->oi = oi;
label->datalo_reg = datalo;
label->datahi_reg = datahi;
@@ -1311,7 +1335,11 @@ static void tcg_out_qemu_ld_slow_path(TCGContext *s, TCGLabelQemuLdst *l)
(uintptr_t)l->raddr);
}
- tcg_out_call(s, qemu_ld_helpers[opc & (MO_BSWAP | MO_SIZE)]);
+ if (opc & MO_EXCL) {
+ tcg_out_call(s, LDEX_HELPER(opc));
+ } else {
+ tcg_out_call(s, qemu_ld_helpers[opc & ~MO_SIGN]);
+ }
data_reg = l->datalo_reg;
switch (opc & MO_SSIZE) {
@@ -1415,9 +1443,16 @@ static void tcg_out_qemu_st_slow_path(TCGContext *s, TCGLabelQemuLdst *l)
}
}
- /* "Tail call" to the helper, with the return address back inline. */
- tcg_out_push(s, retaddr);
- tcg_out_jmp(s, qemu_st_helpers[opc & (MO_BSWAP | MO_SIZE)]);
+ if (opc & MO_EXCL) {
+ tcg_out_call(s, STEX_HELPER(opc));
+ /* Save the output of the StoreConditional */
+ tcg_out_mov(s, TCG_TYPE_I32, l->llsc_success, TCG_REG_EAX);
+ tcg_out_jmp(s, l->raddr);
+ } else {
+ /* "Tail call" to the helper, with the return address back inline. */
+ tcg_out_push(s, retaddr);
+ tcg_out_jmp(s, qemu_st_helpers[opc]);
+ }
}
#elif defined(__x86_64__) && defined(__linux__)
# include <asm/prctl.h>
@@ -1530,7 +1565,8 @@ static void tcg_out_qemu_ld_direct(TCGContext *s, TCGReg datalo, TCGReg datahi,
/* XXX: qemu_ld and qemu_st could be modified to clobber only EDX and
EAX. It will be useful once fixed registers globals are less
common. */
-static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args, bool is64)
+static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args, bool is64,
+ bool isLoadLink)
{
TCGReg datalo, datahi, addrlo;
TCGReg addrhi __attribute__((unused));
@@ -1553,14 +1589,34 @@ static void tcg_out_qemu_ld(TCGContext *s, const TCGArg *args, bool is64)
mem_index = get_mmuidx(oi);
s_bits = opc & MO_SIZE;
- tcg_out_tlb_load(s, addrlo, addrhi, mem_index, s_bits,
- label_ptr, offsetof(CPUTLBEntry, addr_read));
+ if (isLoadLink) {
+ TCGType t = ((TCG_TARGET_REG_BITS == 64) && (TARGET_LONG_BITS == 64)) ?
+ TCG_TYPE_I64 : TCG_TYPE_I32;
+ /* The JMP address will be patched afterwards,
+ * in tcg_out_qemu_ld_slow_path (two times when
+ * TARGET_LONG_BITS > TCG_TARGET_REG_BITS). */
+ tcg_out_mov(s, t, TCG_REG_L1, addrlo);
+
+ if (TARGET_LONG_BITS > TCG_TARGET_REG_BITS) {
+ /* Store the second part of the address. */
+ tcg_out_mov(s, t, TCG_REG_L0, addrhi);
+ /* We add 4 to include the jmp that follows. */
+ label_ptr[1] = s->code_ptr + 4;
+ }
- /* TLB Hit. */
- tcg_out_qemu_ld_direct(s, datalo, datahi, TCG_REG_L1, 0, 0, opc);
+ tcg_out_opc(s, OPC_JMP_long, 0, 0, 0);
+ label_ptr[0] = s->code_ptr;
+ s->code_ptr += 4;
+ } else {
+ tcg_out_tlb_load(s, addrlo, addrhi, mem_index, s_bits,
+ label_ptr, offsetof(CPUTLBEntry, addr_read));
+
+ /* TLB Hit. */
+ tcg_out_qemu_ld_direct(s, datalo, datahi, TCG_REG_L1, 0, 0, opc);
+ }
/* Record the current context of a load into ldst label */
- add_qemu_ldst_label(s, true, oi, datalo, datahi, addrlo, addrhi,
+ add_qemu_ldst_label(s, true, oi, 0, datalo, datahi, addrlo, addrhi,
s->code_ptr, label_ptr);
#else
{
@@ -1663,9 +1719,10 @@ static void tcg_out_qemu_st_direct(TCGContext *s, TCGReg datalo, TCGReg datahi,
}
}
-static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is64)
+static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is64,
+ bool isStoreCond)
{
- TCGReg datalo, datahi, addrlo;
+ TCGReg datalo, datahi, addrlo, llsc_success;
TCGReg addrhi __attribute__((unused));
TCGMemOpIdx oi;
TCGMemOp opc;
@@ -1675,6 +1732,9 @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is64)
tcg_insn_unit *label_ptr[2];
#endif
+ /* The stcond variant has one more param */
+ llsc_success = (isStoreCond ? *args++ : 0);
+
datalo = *args++;
datahi = (TCG_TARGET_REG_BITS == 32 && is64 ? *args++ : 0);
addrlo = *args++;
@@ -1686,15 +1746,35 @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args, bool is64)
mem_index = get_mmuidx(oi);
s_bits = opc & MO_SIZE;
- tcg_out_tlb_load(s, addrlo, addrhi, mem_index, s_bits,
- label_ptr, offsetof(CPUTLBEntry, addr_write));
+ if (isStoreCond) {
+ TCGType t = ((TCG_TARGET_REG_BITS == 64) && (TARGET_LONG_BITS == 64)) ?
+ TCG_TYPE_I64 : TCG_TYPE_I32;
+ /* The JMP address will be filled afterwards,
+ * in tcg_out_qemu_ld_slow_path (two times when
+ * TARGET_LONG_BITS > TCG_TARGET_REG_BITS). */
+ tcg_out_mov(s, t, TCG_REG_L1, addrlo);
+
+ if (TARGET_LONG_BITS > TCG_TARGET_REG_BITS) {
+ /* Store the second part of the address. */
+ tcg_out_mov(s, t, TCG_REG_L0, addrhi);
+ /* We add 4 to include the jmp that follows. */
+ label_ptr[1] = s->code_ptr + 4;
+ }
- /* TLB Hit. */
- tcg_out_qemu_st_direct(s, datalo, datahi, TCG_REG_L1, 0, 0, opc);
+ tcg_out_opc(s, OPC_JMP_long, 0, 0, 0);
+ label_ptr[0] = s->code_ptr;
+ s->code_ptr += 4;
+ } else {
+ tcg_out_tlb_load(s, addrlo, addrhi, mem_index, s_bits,
+ label_ptr, offsetof(CPUTLBEntry, addr_write));
+
+ /* TLB Hit. */
+ tcg_out_qemu_st_direct(s, datalo, datahi, TCG_REG_L1, 0, 0, opc);
+ }
/* Record the current context of a store into ldst label */
- add_qemu_ldst_label(s, false, oi, datalo, datahi, addrlo, addrhi,
- s->code_ptr, label_ptr);
+ add_qemu_ldst_label(s, false, oi, llsc_success, datalo, datahi, addrlo,
+ addrhi, s->code_ptr, label_ptr);
#else
{
int32_t offset = GUEST_BASE;
@@ -1955,16 +2035,22 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
break;
case INDEX_op_qemu_ld_i32:
- tcg_out_qemu_ld(s, args, 0);
+ tcg_out_qemu_ld(s, args, 0, 0);
+ break;
+ case INDEX_op_qemu_ldlink_i32:
+ tcg_out_qemu_ld(s, args, 0, 1);
break;
case INDEX_op_qemu_ld_i64:
- tcg_out_qemu_ld(s, args, 1);
+ tcg_out_qemu_ld(s, args, 1, 0);
break;
case INDEX_op_qemu_st_i32:
- tcg_out_qemu_st(s, args, 0);
+ tcg_out_qemu_st(s, args, 0, 0);
+ break;
+ case INDEX_op_qemu_stcond_i32:
+ tcg_out_qemu_st(s, args, 0, 1);
break;
case INDEX_op_qemu_st_i64:
- tcg_out_qemu_st(s, args, 1);
+ tcg_out_qemu_st(s, args, 1, 0);
break;
OP_32_64(mulu2):
@@ -2186,17 +2272,23 @@ static const TCGTargetOpDef x86_op_defs[] = {
#if TCG_TARGET_REG_BITS == 64
{ INDEX_op_qemu_ld_i32, { "r", "L" } },
+ { INDEX_op_qemu_ldlink_i32, { "r", "L" } },
{ INDEX_op_qemu_st_i32, { "L", "L" } },
+ { INDEX_op_qemu_stcond_i32, { "r", "L", "L" } },
{ INDEX_op_qemu_ld_i64, { "r", "L" } },
{ INDEX_op_qemu_st_i64, { "L", "L" } },
#elif TARGET_LONG_BITS <= TCG_TARGET_REG_BITS
{ INDEX_op_qemu_ld_i32, { "r", "L" } },
+ { INDEX_op_qemu_ldlink_i32, { "r", "L" } },
{ INDEX_op_qemu_st_i32, { "L", "L" } },
+ { INDEX_op_qemu_stcond_i32, { "r", "L", "L" } },
{ INDEX_op_qemu_ld_i64, { "r", "r", "L" } },
{ INDEX_op_qemu_st_i64, { "L", "L", "L" } },
#else
{ INDEX_op_qemu_ld_i32, { "r", "L", "L" } },
+ { INDEX_op_qemu_ldlink_i32, { "r", "L", "L" } },
{ INDEX_op_qemu_st_i32, { "L", "L", "L" } },
+ { INDEX_op_qemu_stcond_i32, { "r", "L", "L", "L" } },
{ INDEX_op_qemu_ld_i64, { "r", "r", "L", "L" } },
{ INDEX_op_qemu_st_i64, { "L", "L", "L", "L" } },
#endif
--
2.4.5
next prev parent reply other threads:[~2015-07-10 8:21 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-10 8:23 [Qemu-devel] [RFC v3 00/13] Slow-path for atomic instruction translation Alvise Rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 01/13] exec: Add new exclusive bitmap to ram_list Alvise Rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 02/13] cputlb: Add new TLB_EXCL flag Alvise Rigo
2015-07-16 14:32 ` Alex Bennée
2015-07-16 15:04 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 03/13] softmmu: Add helpers for a new slow-path Alvise Rigo
2015-07-16 14:53 ` Alex Bennée
2015-07-16 15:15 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 04/13] tcg-op: create new TCG qemu_ldlink and qemu_stcond instructions Alvise Rigo
2015-07-17 9:49 ` Alex Bennée
2015-07-17 10:05 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 05/13] target-arm: translate: implement qemu_ldlink and qemu_stcond ops Alvise Rigo
2015-07-17 12:51 ` Alex Bennée
2015-07-17 13:01 ` alvise rigo
2015-07-10 8:23 ` Alvise Rigo [this message]
2015-07-17 12:56 ` [Qemu-devel] [RFC v3 06/13] target-i386: " Alex Bennée
2015-07-17 13:27 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 07/13] ram_addr.h: Make exclusive bitmap accessors atomic Alvise Rigo
2015-07-17 13:32 ` Alex Bennée
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 08/13] exec.c: introduce a simple rendezvous support Alvise Rigo
2015-07-17 13:45 ` Alex Bennée
2015-07-17 13:54 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 09/13] cpus.c: introduce simple callback support Alvise Rigo
2015-07-10 9:36 ` Paolo Bonzini
2015-07-10 9:47 ` alvise rigo
2015-07-10 9:53 ` Frederic Konrad
2015-07-10 10:06 ` alvise rigo
2015-07-10 10:24 ` Paolo Bonzini
2015-07-10 12:16 ` Frederic Konrad
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 10/13] Simple TLB flush wrap to use as exit callback Alvise Rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 11/13] Introduce exit_flush_req and tcg_excl_access_lock Alvise Rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 12/13] softmmu_llsc_template.h: move to multithreading Alvise Rigo
2015-07-17 15:27 ` Alex Bennée
2015-07-17 15:31 ` alvise rigo
2015-07-10 8:23 ` [Qemu-devel] [RFC v3 13/13] softmmu_template.h: " Alvise Rigo
2015-07-17 15:57 ` Alex Bennée
2015-07-17 16:19 ` alvise rigo
2015-07-10 8:31 ` [Qemu-devel] [RFC v3 00/13] Slow-path for atomic instruction translation Mark Burton
2015-07-10 8:58 ` alvise rigo
2015-07-10 8:39 ` Frederic Konrad
2015-07-10 9:04 ` alvise rigo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436516626-8322-7-git-send-email-a.rigo@virtualopensystems.com \
--to=a.rigo@virtualopensystems.com \
--cc=alex.bennee@linaro.org \
--cc=claudio.fontana@huawei.com \
--cc=jani.kokkonen@huawei.com \
--cc=mttcg@listserver.greensocs.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=tech@virtualopensystems.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).