From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Subject: [Qemu-devel] [PULL 1/9] target-mips: fix MIPS64R6-generic configuration
Date: Thu, 16 Jul 2015 09:17:29 +0100 [thread overview]
Message-ID: <1437034657-31026-2-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1437034657-31026-1-git-send-email-leon.alrae@imgtec.com>
From: Yongbok Kim <yongbok.kim@imgtec.com>
Fix core configuration for MIPS64R6-generic to make it as close as
I6400.
I6400 core has 48-bit of Virtual Address available (SEGBITS).
MIPS SIMD Architecture is available.
Rearrange order of bits to match the specification.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
target-mips/mips-defs.h | 2 +-
target-mips/translate_init.c | 18 +++++++++---------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/target-mips/mips-defs.h b/target-mips/mips-defs.h
index 20aa87c..53b185e 100644
--- a/target-mips/mips-defs.h
+++ b/target-mips/mips-defs.h
@@ -11,7 +11,7 @@
#if defined(TARGET_MIPS64)
#define TARGET_LONG_BITS 64
#define TARGET_PHYS_ADDR_SPACE_BITS 48
-#define TARGET_VIRT_ADDR_SPACE_BITS 42
+#define TARGET_VIRT_ADDR_SPACE_BITS 48
#else
#define TARGET_LONG_BITS 32
#define TARGET_PHYS_ADDR_SPACE_BITS 40
diff --git a/target-mips/translate_init.c b/target-mips/translate_init.c
index ddfaff8..9304e74 100644
--- a/target-mips/translate_init.c
+++ b/target-mips/translate_init.c
@@ -655,14 +655,14 @@ static const mips_def_t mips_defs[] =
(2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
(0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
.CP0_Config2 = MIPS_CONFIG2,
- .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_RXI) | (1 << CP0C3_BP) |
- (1 << CP0C3_BI) | (1 << CP0C3_ULRI) | (1 << CP0C3_LPA) |
- (1U << CP0C3_M),
- .CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
- (3 << CP0C4_IE) | (1 << CP0C4_M),
+ .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_MSAP) |
+ (1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_ULRI) |
+ (1 << CP0C3_RXI) | (1 << CP0C3_LPA),
+ .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (3 << CP0C4_IE) |
+ (0xfc << CP0C4_KScrExist),
.CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_LLB),
- .CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
- (1 << CP0C5_UFE),
+ .CP0_Config5_rw_bitmask = (1 << CP0C5_MSAEn) | (1 << CP0C5_SBRI) |
+ (1 << CP0C5_FRE) | (1 << CP0C5_UFE),
.CP0_LLAddr_rw_bitmask = 0,
.CP0_LLAddr_shift = 0,
.SYNCI_Step = 32,
@@ -674,9 +674,9 @@ static const mips_def_t mips_defs[] =
.CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_F64) | (1 << FCR0_L) |
(1 << FCR0_W) | (1 << FCR0_D) | (1 << FCR0_S) |
(0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
- .SEGBITS = 42,
+ .SEGBITS = 48,
.PABITS = 48,
- .insn_flags = CPU_MIPS64R6,
+ .insn_flags = CPU_MIPS64R6 | ASE_MSA,
.mmu_type = MMU_TYPE_R4000,
},
{
--
2.1.0
next prev parent reply other threads:[~2015-07-16 8:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 8:17 [Qemu-devel] [PULL 0/9] target-mips queue Leon Alrae
2015-07-16 8:17 ` Leon Alrae [this message]
2015-07-16 8:17 ` [Qemu-devel] [PULL 2/9] target-mips: fix to clear MSACSR.Cause Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 3/9] disas/mips: fix disassembling R6 instructions Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 4/9] target-mips: fix ASID synchronisation for MIPS MT Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 5/9] target-mips: correct DERET instruction Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 6/9] target-mips: fix logically dead code reported by Coverity Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 7/9] target-mips: fix resource leak " Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 8/9] linux-user: Fix MIPS N64 trap and break instruction bug Leon Alrae
2015-07-16 8:17 ` [Qemu-devel] [PULL 9/9] target-mips: fix page fault address for LWL/LWR/LDL/LDR Leon Alrae
2015-07-16 10:44 ` [Qemu-devel] [PULL 0/9] target-mips queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437034657-31026-2-git-send-email-leon.alrae@imgtec.com \
--to=leon.alrae@imgtec.com \
--cc=qemu-devel@nongnu.org \
--cc=yongbok.kim@imgtec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).