From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: thibaut.collet@6wind.com, fbl@redhat.com,
marcandre.lureau@gmail.com, haifeng.lin@huawei.com,
changchun.ouyang@intel.com
Subject: [Qemu-devel] [PATCH 2/4] vhost-user: refactor ioctl translation
Date: Fri, 17 Jul 2015 17:09:34 +0300 [thread overview]
Message-ID: <1437142095-20217-3-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1437142095-20217-1-git-send-email-mst@redhat.com>
translate at the outset, have rest of code use vhost-user features
exclusively.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio/vhost-user.c | 87 ++++++++++++++++++++++++++------------------------
1 file changed, 46 insertions(+), 41 deletions(-)
diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
index e7ab829..5a83d00 100644
--- a/hw/virtio/vhost-user.c
+++ b/hw/virtio/vhost-user.c
@@ -89,35 +89,40 @@ static bool ioeventfd_enabled(void)
return kvm_enabled() && kvm_eventfds_enabled();
}
-static unsigned long int ioctl_to_vhost_user_request[VHOST_USER_MAX] = {
- -1, /* VHOST_USER_NONE */
- VHOST_GET_FEATURES, /* VHOST_USER_GET_FEATURES */
- VHOST_SET_FEATURES, /* VHOST_USER_SET_FEATURES */
- VHOST_SET_OWNER, /* VHOST_USER_SET_OWNER */
- VHOST_RESET_OWNER, /* VHOST_USER_RESET_OWNER */
- VHOST_SET_MEM_TABLE, /* VHOST_USER_SET_MEM_TABLE */
- VHOST_SET_LOG_BASE, /* VHOST_USER_SET_LOG_BASE */
- VHOST_SET_LOG_FD, /* VHOST_USER_SET_LOG_FD */
- VHOST_SET_VRING_NUM, /* VHOST_USER_SET_VRING_NUM */
- VHOST_SET_VRING_ADDR, /* VHOST_USER_SET_VRING_ADDR */
- VHOST_SET_VRING_BASE, /* VHOST_USER_SET_VRING_BASE */
- VHOST_GET_VRING_BASE, /* VHOST_USER_GET_VRING_BASE */
- VHOST_SET_VRING_KICK, /* VHOST_USER_SET_VRING_KICK */
- VHOST_SET_VRING_CALL, /* VHOST_USER_SET_VRING_CALL */
- VHOST_SET_VRING_ERR /* VHOST_USER_SET_VRING_ERR */
-};
-
static VhostUserRequest vhost_user_request_translate(unsigned long int request)
{
- VhostUserRequest idx;
-
- for (idx = 0; idx < VHOST_USER_MAX; idx++) {
- if (ioctl_to_vhost_user_request[idx] == request) {
- break;
- }
+ switch (request) {
+ case VHOST_GET_FEATURES:
+ return VHOST_USER_GET_FEATURES;
+ case VHOST_SET_FEATURES:
+ return VHOST_USER_SET_FEATURES;
+ case VHOST_SET_OWNER:
+ return VHOST_USER_SET_OWNER;
+ case VHOST_RESET_OWNER:
+ return VHOST_USER_RESET_OWNER;
+ case VHOST_SET_MEM_TABLE:
+ return VHOST_USER_SET_MEM_TABLE;
+ case VHOST_SET_LOG_BASE:
+ return VHOST_USER_SET_LOG_BASE;
+ case VHOST_SET_LOG_FD:
+ return VHOST_USER_SET_LOG_FD;
+ case VHOST_SET_VRING_NUM:
+ return VHOST_USER_SET_VRING_NUM;
+ case VHOST_SET_VRING_ADDR:
+ return VHOST_USER_SET_VRING_ADDR;
+ case VHOST_SET_VRING_BASE:
+ return VHOST_USER_SET_VRING_BASE;
+ case VHOST_GET_VRING_BASE:
+ return VHOST_USER_GET_VRING_BASE;
+ case VHOST_SET_VRING_KICK:
+ return VHOST_USER_SET_VRING_KICK;
+ case VHOST_SET_VRING_CALL:
+ return VHOST_USER_SET_VRING_CALL;
+ case VHOST_SET_VRING_ERR:
+ return VHOST_USER_SET_VRING_ERR;
+ default:
+ return VHOST_USER_MAX;
}
-
- return (idx == VHOST_USER_MAX) ? VHOST_USER_NONE : idx;
}
static int vhost_user_read(struct vhost_dev *dev, VhostUserMsg *msg)
@@ -198,22 +203,22 @@ static int vhost_user_call(struct vhost_dev *dev, unsigned long int request,
msg.flags = VHOST_USER_VERSION;
msg.size = 0;
- switch (request) {
- case VHOST_GET_FEATURES:
+ switch (msg_request) {
+ case VHOST_USER_GET_FEATURES:
need_reply = 1;
break;
- case VHOST_SET_FEATURES:
- case VHOST_SET_LOG_BASE:
+ case VHOST_USER_SET_FEATURES:
+ case VHOST_USER_SET_LOG_BASE:
msg.u64 = *((__u64 *) arg);
msg.size = sizeof(m.u64);
break;
- case VHOST_SET_OWNER:
- case VHOST_RESET_OWNER:
+ case VHOST_USER_SET_OWNER:
+ case VHOST_USER_RESET_OWNER:
break;
- case VHOST_SET_MEM_TABLE:
+ case VHOST_USER_SET_MEM_TABLE:
for (i = 0; i < dev->mem->nregions; ++i) {
struct vhost_memory_region *reg = dev->mem->regions + i;
ram_addr_t ram_addr;
@@ -246,30 +251,30 @@ static int vhost_user_call(struct vhost_dev *dev, unsigned long int request,
break;
- case VHOST_SET_LOG_FD:
+ case VHOST_USER_SET_LOG_FD:
fds[fd_num++] = *((int *) arg);
break;
- case VHOST_SET_VRING_NUM:
- case VHOST_SET_VRING_BASE:
+ case VHOST_USER_SET_VRING_NUM:
+ case VHOST_USER_SET_VRING_BASE:
memcpy(&msg.state, arg, sizeof(struct vhost_vring_state));
msg.size = sizeof(m.state);
break;
- case VHOST_GET_VRING_BASE:
+ case VHOST_USER_GET_VRING_BASE:
memcpy(&msg.state, arg, sizeof(struct vhost_vring_state));
msg.size = sizeof(m.state);
need_reply = 1;
break;
- case VHOST_SET_VRING_ADDR:
+ case VHOST_USER_SET_VRING_ADDR:
memcpy(&msg.addr, arg, sizeof(struct vhost_vring_addr));
msg.size = sizeof(m.addr);
break;
- case VHOST_SET_VRING_KICK:
- case VHOST_SET_VRING_CALL:
- case VHOST_SET_VRING_ERR:
+ case VHOST_USER_SET_VRING_KICK:
+ case VHOST_USER_SET_VRING_CALL:
+ case VHOST_USER_SET_VRING_ERR:
file = arg;
msg.u64 = file->index & VHOST_USER_VRING_IDX_MASK;
msg.size = sizeof(m.u64);
--
MST
next prev parent reply other threads:[~2015-07-17 14:09 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-17 14:09 [Qemu-devel] [PATCH 0/4] vhost-user: protocol updates Michael S. Tsirkin
2015-07-17 14:09 ` [Qemu-devel] [PATCH 1/4] Revert "vhost-user: add multi queue support" Michael S. Tsirkin
2015-07-17 14:16 ` [Qemu-devel] [PATCH for-2.4 " Eric Blake
2015-07-17 14:09 ` Michael S. Tsirkin [this message]
2015-07-17 14:09 ` [Qemu-devel] [PATCH 3/4] vhost-user: add protocol feature negotiation Michael S. Tsirkin
2015-07-17 18:14 ` Flavio Leitner
2015-07-22 17:53 ` Marc-André Lureau
2015-07-17 14:09 ` [Qemu-devel] [PATCH 4/4] vhost-user: unit test for new messages Michael S. Tsirkin
2015-07-23 7:14 ` Ouyang, Changchun
2015-07-17 16:05 ` [Qemu-devel] [PATCH 0/4] vhost-user: protocol updates Maxime Leroy
2015-07-17 18:15 ` Flavio Leitner
2015-07-24 15:30 ` Thibaut Collet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437142095-20217-3-git-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=changchun.ouyang@intel.com \
--cc=fbl@redhat.com \
--cc=haifeng.lin@huawei.com \
--cc=marcandre.lureau@gmail.com \
--cc=qemu-devel@nongnu.org \
--cc=thibaut.collet@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).