[Qemu-devel] [PATCH v4 24/38] blockdev: Allow more options for BB-less BDS tree

[Max Reitz <mreitz@redhat.com>]

Most of the options which blockdev_init() parses for both the
BlockBackend and the root BDS are valid for just the root BDS as well
(e.g. read-only). This patch allows specifying these options even if not
creating a BlockBackend.

Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 blockdev.c | 160 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 154 insertions(+), 6 deletions(-)

diff --git a/blockdev.c b/blockdev.c
index 2973985..44a8c6b 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -606,6 +606,65 @@ err_no_opts:
     return NULL;
 }
 
+static QemuOptsList qemu_root_bds_opts;
+
+/* Takes the ownership of bs_opts */
+static BlockDriverState *bds_tree_init(QDict *bs_opts, Error **errp)
+{
+    BlockDriverState *bs;
+    QemuOpts *opts;
+    Error *local_error = NULL;
+    ThrottleConfig cfg;
+    BlockdevDetectZeroesOptions detect_zeroes;
+    const char *throttling_group = NULL;
+    int ret;
+    int bdrv_flags = 0;
+
+    opts = qemu_opts_create(&qemu_root_bds_opts, NULL, 1, errp);
+    if (!opts) {
+        goto fail;
+    }
+
+    qemu_opts_absorb_qdict(opts, bs_opts, &local_error);
+    if (local_error) {
+        error_propagate(errp, local_error);
+        goto fail;
+    }
+
+    extract_common_blockdev_options(opts, &bdrv_flags, &cfg, &detect_zeroes,
+                                    &throttling_group, &local_error);
+    if (local_error) {
+        error_propagate(errp, local_error);
+        goto fail;
+    }
+
+    bs = NULL;
+    ret = bdrv_open(&bs, NULL, NULL, bs_opts, bdrv_flags, NULL, errp);
+    if (ret < 0) {
+        goto fail_no_bs_opts;
+    }
+
+    bs->detect_zeroes = detect_zeroes;
+
+    /* disk I/O throttling */
+    if (throttle_enabled(&cfg)) {
+        if (!throttling_group) {
+            throttling_group = bdrv_get_node_name(bs);
+        }
+        bdrv_io_limits_enable(bs, throttling_group);
+        bdrv_set_io_limits(bs, &cfg);
+    }
+
+fail_no_bs_opts:
+    qemu_opts_del(opts);
+    return bs;
+
+fail:
+    qemu_opts_del(opts);
+    QDECREF(bs_opts);
+    return NULL;
+}
+
 static void qemu_opt_rename(QemuOpts *opts, const char *from, const char *to,
                             Error **errp)
 {
@@ -3180,18 +3239,14 @@ void qmp_blockdev_add(BlockdevOptions *options, Error **errp)
 
         bs = blk_bs(blk);
     } else {
-        int ret;
-
         if (!qdict_get_try_str(qdict, "node-name")) {
             error_setg(errp, "'id' and/or 'node-name' need to be specified for "
                        "the root node");
             goto fail;
         }
 
-        bs = NULL;
-        ret = bdrv_open(&bs, NULL, NULL, qdict, BDRV_O_RDWR | BDRV_O_CACHE_WB,
-                        NULL, errp);
-        if (ret < 0) {
+        bs = bds_tree_init(qdict, errp);
+        if (!bs) {
             goto fail;
         }
     }
@@ -3346,6 +3401,99 @@ QemuOptsList qemu_common_drive_opts = {
     },
 };
 
+static QemuOptsList qemu_root_bds_opts = {
+    .name = "root-bds",
+    .head = QTAILQ_HEAD_INITIALIZER(qemu_common_drive_opts.head),
+    .desc = {
+        {
+            .name = "discard",
+            .type = QEMU_OPT_STRING,
+            .help = "discard operation (ignore/off, unmap/on)",
+        },{
+            .name = "cache.writeback",
+            .type = QEMU_OPT_BOOL,
+            .help = "enables writeback mode for any caches",
+        },{
+            .name = "cache.direct",
+            .type = QEMU_OPT_BOOL,
+            .help = "enables use of O_DIRECT (bypass the host page cache)",
+        },{
+            .name = "cache.no-flush",
+            .type = QEMU_OPT_BOOL,
+            .help = "ignore any flush requests for the device",
+        },{
+            .name = "aio",
+            .type = QEMU_OPT_STRING,
+            .help = "host AIO implementation (threads, native)",
+        },{
+            .name = "read-only",
+            .type = QEMU_OPT_BOOL,
+            .help = "open drive file as read-only",
+        },{
+            .name = "throttling.iops-total",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit total I/O operations per second",
+        },{
+            .name = "throttling.iops-read",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit read operations per second",
+        },{
+            .name = "throttling.iops-write",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit write operations per second",
+        },{
+            .name = "throttling.bps-total",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit total bytes per second",
+        },{
+            .name = "throttling.bps-read",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit read bytes per second",
+        },{
+            .name = "throttling.bps-write",
+            .type = QEMU_OPT_NUMBER,
+            .help = "limit write bytes per second",
+        },{
+            .name = "throttling.iops-total-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations burst",
+        },{
+            .name = "throttling.iops-read-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations read burst",
+        },{
+            .name = "throttling.iops-write-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "I/O operations write burst",
+        },{
+            .name = "throttling.bps-total-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes burst",
+        },{
+            .name = "throttling.bps-read-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes read burst",
+        },{
+            .name = "throttling.bps-write-max",
+            .type = QEMU_OPT_NUMBER,
+            .help = "total bytes write burst",
+        },{
+            .name = "throttling.iops-size",
+            .type = QEMU_OPT_NUMBER,
+            .help = "when limiting by iops max size of an I/O in bytes",
+        },{
+            .name = "copy-on-read",
+            .type = QEMU_OPT_BOOL,
+            .help = "copy read data from backing file into image file",
+        },{
+            .name = "detect-zeroes",
+            .type = QEMU_OPT_STRING,
+            .help = "try to optimize zero writes (off, on, unmap)",
+        },
+        { /* end of list */ }
+    },
+};
+
 QemuOptsList qemu_drive_opts = {
     .name = "drive",
     .head = QTAILQ_HEAD_INITIALIZER(qemu_drive_opts.head),
-- 
2.4.6