[Qemu-devel] [PATCH v4 03/38] iotests: Only create BB if necessary

[Max Reitz <mreitz@redhat.com>]

Tests 071 and 081 test giving references in blockdev-add. It is not
necessary to create a BlockBackend here, so omit it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
 tests/qemu-iotests/071     | 50 ++++++++++++++++++++++++++++++++++++++++++----
 tests/qemu-iotests/071.out | 12 +++++++----
 tests/qemu-iotests/081     | 14 ++++++++++++-
 tests/qemu-iotests/081.out |  5 +++--
 4 files changed, 70 insertions(+), 11 deletions(-)

diff --git a/tests/qemu-iotests/071 b/tests/qemu-iotests/071
index 9eaa49b..68bedd4 100755
--- a/tests/qemu-iotests/071
+++ b/tests/qemu-iotests/071
@@ -104,11 +104,20 @@ echo
 echo "=== Testing blkdebug on existing block device ==="
 echo
 
-run_qemu -drive "file=$TEST_IMG,format=raw,if=none,id=drive0" <<EOF
+run_qemu <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
         "options": {
+            "node-name": "drive0",
+            "driver": "file",
+            "filename": "$TEST_IMG"
+        }
+    }
+}
+{ "execute": "blockdev-add",
+    "arguments": {
+        "options": {
             "driver": "$IMGFMT",
             "id": "drive0-debug",
             "file": {
@@ -133,11 +142,23 @@ echo
 echo "=== Testing blkverify on existing block device ==="
 echo
 
-run_qemu -drive "file=$TEST_IMG,format=$IMGFMT,if=none,id=drive0" <<EOF
+run_qemu <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
         "options": {
+            "node-name": "drive0",
+            "driver": "$IMGFMT",
+            "file": {
+                "driver": "file",
+                "filename": "$TEST_IMG"
+            }
+        }
+    }
+}
+{ "execute": "blockdev-add",
+    "arguments": {
+        "options": {
             "driver": "blkverify",
             "id": "drive0-verify",
             "test": "drive0",
@@ -163,11 +184,23 @@ echo
 echo "=== Testing blkverify on existing raw block device ==="
 echo
 
-run_qemu -drive "file=$TEST_IMG.base,format=raw,if=none,id=drive0" <<EOF
+run_qemu <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
         "options": {
+            "node-name": "drive0",
+            "driver": "raw",
+            "file": {
+                "driver": "file",
+                "filename": "$TEST_IMG.base"
+            }
+        }
+    }
+}
+{ "execute": "blockdev-add",
+    "arguments": {
+        "options": {
             "driver": "blkverify",
             "id": "drive0-verify",
             "test": {
@@ -193,11 +226,20 @@ echo
 echo "=== Testing blkdebug's set-state through QMP ==="
 echo
 
-run_qemu -drive "file=$TEST_IMG,format=raw,if=none,id=drive0" <<EOF
+run_qemu <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
         "options": {
+            "node-name": "drive0",
+            "driver": "file",
+            "filename": "$TEST_IMG"
+        }
+    }
+}
+{ "execute": "blockdev-add",
+    "arguments": {
+        "options": {
             "driver": "$IMGFMT",
             "id": "drive0-debug",
             "file": {
diff --git a/tests/qemu-iotests/071.out b/tests/qemu-iotests/071.out
index 9205ce2..c8ecfaf 100644
--- a/tests/qemu-iotests/071.out
+++ b/tests/qemu-iotests/071.out
@@ -42,10 +42,11 @@ read failed: Input/output error
 
 === Testing blkdebug on existing block device ===
 
-Testing: -drive file=TEST_DIR/t.IMGFMT,format=raw,if=none,id=drive0
+Testing:
 QMP_VERSION
 {"return": {}}
 {"return": {}}
+{"return": {}}
 read failed: Input/output error
 {"return": ""}
 {"return": {}}
@@ -58,28 +59,31 @@ QEMU_PROG: Failed to flush the refcount block cache: Input/output error
 
 === Testing blkverify on existing block device ===
 
-Testing: -drive file=TEST_DIR/t.IMGFMT,format=IMGFMT,if=none,id=drive0
+Testing:
 QMP_VERSION
 {"return": {}}
 {"return": {}}
+{"return": {}}
 blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
 
 
 === Testing blkverify on existing raw block device ===
 
-Testing: -drive file=TEST_DIR/t.IMGFMT.base,format=raw,if=none,id=drive0
+Testing:
 QMP_VERSION
 {"return": {}}
 {"return": {}}
+{"return": {}}
 blkverify: read sector_num=0 nb_sectors=1 contents mismatch in sector 0
 
 
 === Testing blkdebug's set-state through QMP ===
 
-Testing: -drive file=TEST_DIR/t.IMGFMT,format=raw,if=none,id=drive0
+Testing:
 QMP_VERSION
 {"return": {}}
 {"return": {}}
+{"return": {}}
 read 512/512 bytes at offset 0
 512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 {"return": ""}
diff --git a/tests/qemu-iotests/081 b/tests/qemu-iotests/081
index d9b042c..5c8a8fa 100755
--- a/tests/qemu-iotests/081
+++ b/tests/qemu-iotests/081
@@ -101,11 +101,23 @@ $QEMU_IO -c "open -o $quorum" -c "read -P 0x32 0 $size" | _filter_qemu_io
 echo
 echo "== checking mixed reference/option specification =="
 
-run_qemu -drive "file=$TEST_DIR/2.raw,format=$IMGFMT,if=none,id=drive2" <<EOF
+run_qemu <<EOF
 { "execute": "qmp_capabilities" }
 { "execute": "blockdev-add",
     "arguments": {
         "options": {
+            "node-name": "drive2",
+            "driver": "raw",
+            "file": {
+                "driver": "file",
+                "filename": "$TEST_DIR/2.raw"
+            }
+        }
+    }
+}
+{ "execute": "blockdev-add",
+    "arguments": {
+        "options": {
             "driver": "quorum",
             "id": "drive0-quorum",
             "vote-threshold": 2,
diff --git a/tests/qemu-iotests/081.out b/tests/qemu-iotests/081.out
index 9f57d9d..2375916 100644
--- a/tests/qemu-iotests/081.out
+++ b/tests/qemu-iotests/081.out
@@ -26,11 +26,12 @@ read 10485760/10485760 bytes at offset 0
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 
 == checking mixed reference/option specification ==
-Testing: -drive file=TEST_DIR/2.IMGFMT,format=IMGFMT,if=none,id=drive2
+Testing:
 QMP_VERSION
 {"return": {}}
 {"return": {}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "QUORUM_REPORT_BAD", "data": {"node-name": "", "sectors-count": 20480, "sector-num": 0}}
+{"return": {}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "QUORUM_REPORT_BAD", "data": {"node-name": "drive2", "sectors-count": 20480, "sector-num": 0}}
 read 10485760/10485760 bytes at offset 0
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 {"return": ""}
-- 
2.4.6