From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org,
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>,
quintela@redhat.com, dgilbert@redhat.com,
vsementsov@parallels.com, stefanha@redhat.com, den@openvz.org,
amit.shah@redhat.com, pbonzini@redhat.com, jsnow@redhat.com
Subject: [Qemu-devel] [PATCH 01/12] hbitmap: serialization
Date: Fri, 7 Aug 2015 12:32:33 +0300 [thread overview]
Message-ID: <1438939964-12584-2-git-send-email-vsementsov@virtuozzo.com> (raw)
In-Reply-To: <1438939964-12584-1-git-send-email-vsementsov@virtuozzo.com>
From: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
Functions to serialize / deserialize(restore) HBitmap. HBitmap should be
saved to linear sequence of bits independently of endianness and bitmap
array element (unsigned long) size. Therefore Little Endian is chosen.
These functions are appropriate for dirty bitmap migration, restoring
the bitmap in several steps is available. To save performance, every
step writes only the last level of the bitmap. All other levels are
restored by hbitmap_deserialize_finish() as a last step of restoring.
So, HBitmap is inconsistent while restoring.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
include/qemu/hbitmap.h | 59 ++++++++++++++++++++++++++++++
util/hbitmap.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 157 insertions(+)
diff --git a/include/qemu/hbitmap.h b/include/qemu/hbitmap.h
index bb94a00..1da5b35 100644
--- a/include/qemu/hbitmap.h
+++ b/include/qemu/hbitmap.h
@@ -149,6 +149,65 @@ void hbitmap_reset_all(HBitmap *hb);
bool hbitmap_get(const HBitmap *hb, uint64_t item);
/**
+ * hbitmap_data_size:
+ * @hb: HBitmap to operate on.
+ * @count: Number of bits
+ *
+ * Return amount of bytes hbitmap_serialize_part needs
+ */
+uint64_t hbitmap_data_size(const HBitmap *hb, uint64_t count);
+
+/**
+ * hbitmap_serialize_part
+ * @hb: HBitmap to oprate on.
+ * @buf: Buffer to store serialized bitmap.
+ * @start: First bit to store.
+ * @count: Number of bits to store.
+ *
+ * Stores HBitmap data corresponding to given region. The format of saved data
+ * is linear sequence of bits, so it can be used by hbitmap_deserialize_part
+ * independently of endianness and size of HBitmap level array elements
+ */
+void hbitmap_serialize_part(const HBitmap *hb, uint8_t *buf,
+ uint64_t start, uint64_t count);
+
+/**
+ * hbitmap_deserialize_part
+ * @hb: HBitmap to operate on.
+ * @buf: Buffer to restore bitmap data from.
+ * @start: First bit to restore.
+ * @count: Number of bits to restore.
+ *
+ * Retores HBitmap data corresponding to given region. The format is the same
+ * as for hbitmap_serialize_part.
+ *
+ * ! The bitmap becomes inconsistent after this operation.
+ * hbitmap_serialize_finish should be called before using the bitmap after
+ * data restoring.
+ */
+void hbitmap_deserialize_part(HBitmap *hb, uint8_t *buf,
+ uint64_t start, uint64_t count);
+
+/**
+ * hbitmap_deserialize_zeroes
+ * @hb: HBitmap to operate on.
+ * @start: First bit to restore.
+ * @count: Number of bits to restore.
+ *
+ * Same as hbitmap_serialize_part, but fills the bitmap with zeroes.
+ */
+void hbitmap_deserialize_zeroes(HBitmap *hb, uint64_t start, uint64_t count);
+
+/**
+ * hbitmap_deserialize_finish
+ * @hb: HBitmap to operate on.
+ *
+ * Repair HBitmap after calling hbitmap_deserialize_data. Actually, all HBitmap
+ * layers are restored here.
+ */
+void hbitmap_deserialize_finish(HBitmap *hb);
+
+/**
* hbitmap_free:
* @hb: HBitmap to operate on.
*
diff --git a/util/hbitmap.c b/util/hbitmap.c
index 50b888f..c7c21fe 100644
--- a/util/hbitmap.c
+++ b/util/hbitmap.c
@@ -378,6 +378,104 @@ bool hbitmap_get(const HBitmap *hb, uint64_t item)
return (hb->levels[HBITMAP_LEVELS - 1][pos >> BITS_PER_LEVEL] & bit) != 0;
}
+uint64_t hbitmap_data_size(const HBitmap *hb, uint64_t count)
+{
+ uint64_t size, gran;
+
+ if (count == 0) {
+ return 0;
+ }
+
+ gran = 1ll << hb->granularity;
+ size = (((gran + count - 2) >> hb->granularity) >> BITS_PER_LEVEL) + 1;
+
+ return size * sizeof(unsigned long);
+}
+
+void hbitmap_serialize_part(const HBitmap *hb, uint8_t *buf,
+ uint64_t start, uint64_t count)
+{
+ uint64_t i;
+ uint64_t last = start + count - 1;
+ unsigned long *out = (unsigned long *)buf;
+
+ if (count == 0) {
+ return;
+ }
+
+ start = (start >> hb->granularity) >> BITS_PER_LEVEL;
+ last = (last >> hb->granularity) >> BITS_PER_LEVEL;
+ count = last - start + 1;
+
+ for (i = start; i <= last; ++i) {
+ unsigned long el = hb->levels[HBITMAP_LEVELS - 1][i];
+ out[i - start] =
+ (BITS_PER_LONG == 32 ? cpu_to_le32(el) : cpu_to_le64(el));
+ }
+}
+
+void hbitmap_deserialize_part(HBitmap *hb, uint8_t *buf,
+ uint64_t start, uint64_t count)
+{
+ uint64_t i;
+ uint64_t last = start + count - 1;
+ unsigned long *in = (unsigned long *)buf;
+
+ if (count == 0) {
+ return;
+ }
+
+ start = (start >> hb->granularity) >> BITS_PER_LEVEL;
+ last = (last >> hb->granularity) >> BITS_PER_LEVEL;
+ count = last - start + 1;
+
+ for (i = start; i <= last; ++i) {
+ hb->levels[HBITMAP_LEVELS - 1][i] =
+ (BITS_PER_LONG == 32 ? le32_to_cpu(in[i - start]) :
+ le64_to_cpu(in[i - start]));
+ }
+}
+
+void hbitmap_deserialize_zeroes(HBitmap *hb, uint64_t start, uint64_t count)
+{
+ uint64_t last = start + count - 1;
+
+ if (count == 0) {
+ return;
+ }
+
+ start = (start >> hb->granularity) >> BITS_PER_LEVEL;
+ last = (last >> hb->granularity) >> BITS_PER_LEVEL;
+ count = last - start + 1;
+
+ memset(hb->levels[HBITMAP_LEVELS - 1] + start, 0,
+ count * sizeof(unsigned long));
+}
+
+void hbitmap_deserialize_finish(HBitmap *bitmap)
+{
+ int64_t i, size, prev_size;
+ int lev;
+
+ /* restore levels starting from penultimate to zero level, assuming
+ * that the last level is ok */
+ size = MAX((bitmap->size + BITS_PER_LONG - 1) >> BITS_PER_LEVEL, 1);
+ for (lev = HBITMAP_LEVELS - 1; lev-- > 0; ) {
+ prev_size = size;
+ size = MAX((size + BITS_PER_LONG - 1) >> BITS_PER_LEVEL, 1);
+ memset(bitmap->levels[lev], 0, size * sizeof(unsigned long));
+
+ for (i = 0; i < prev_size; ++i) {
+ if (bitmap->levels[lev + 1][i]) {
+ bitmap->levels[lev][i >> BITS_PER_LEVEL] |=
+ 1 << (i & (BITS_PER_LONG - 1));
+ }
+ }
+ }
+
+ bitmap->levels[0][0] |= 1UL << (BITS_PER_LONG - 1);
+}
+
void hbitmap_free(HBitmap *hb)
{
unsigned i;
--
2.1.4
next prev parent reply other threads:[~2015-08-07 9:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-07 9:32 [Qemu-devel] [PATCH v6 00/12] Dirty bitmaps migration Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` Vladimir Sementsov-Ogievskiy [this message]
2015-08-20 14:53 ` [Qemu-devel] [PATCH 01/12] hbitmap: serialization Stefan Hajnoczi
2015-08-07 9:32 ` [Qemu-devel] [PATCH 02/12] block: BdrvDirtyBitmap serialization interface Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 03/12] block: tiny refactoring: minimize hbitmap_(set/reset) usage Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 04/12] block: add meta bitmaps Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 05/12] block: add bdrv_next_dirty_bitmap() Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 06/12] qapi: add dirty-bitmaps migration capability Vladimir Sementsov-Ogievskiy
2015-09-15 16:27 ` Eric Blake
2015-08-07 9:32 ` [Qemu-devel] [PATCH 07/12] migration/qemu-file: add qemu_put_counted_string() Vladimir Sementsov-Ogievskiy
2015-09-11 0:02 ` John Snow
2015-08-07 9:32 ` [Qemu-devel] [PATCH 08/12] migration: add migration/block-dirty-bitmap.c Vladimir Sementsov-Ogievskiy
2015-09-11 0:10 ` John Snow
2015-08-07 9:32 ` [Qemu-devel] [PATCH 09/12] iotests: maintain several vms in test Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 10/12] iotests: add add_incoming_migration to VM class Vladimir Sementsov-Ogievskiy
2015-08-07 9:32 ` [Qemu-devel] [PATCH 11/12] qapi: add md5 checksum of last dirty bitmap level to query-block Vladimir Sementsov-Ogievskiy
2015-09-15 16:29 ` Eric Blake
2015-09-15 19:44 ` John Snow
2015-09-16 5:22 ` Markus Armbruster
2015-08-07 9:32 ` [Qemu-devel] [PATCH 12/12] iotests: add dirty bitmap migration test Vladimir Sementsov-Ogievskiy
2015-08-07 10:10 ` [Qemu-devel] [PATCH v6 00/12] Dirty bitmaps migration Vladimir Sementsov-Ogievskiy
2015-09-11 0:11 ` John Snow
-- strict thread matches above, loose matches on Subject: below --
2015-05-13 15:29 [Qemu-devel] [PATCH v5 " Vladimir Sementsov-Ogievskiy
2015-05-13 15:29 ` [Qemu-devel] [PATCH 01/12] hbitmap: serialization Vladimir Sementsov-Ogievskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438939964-12584-2-git-send-email-vsementsov@virtuozzo.com \
--to=vsementsov@virtuozzo.com \
--cc=amit.shah@redhat.com \
--cc=den@openvz.org \
--cc=dgilbert@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=stefanha@redhat.com \
--cc=vsementsov@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).