From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: Markus Armbruster <armbru@redhat.com>, patches@linaro.org
Subject: [Qemu-devel] [PATCH 2/3] hw/sd/pxa2xx_mmci: Convert to VMStateDescription
Date: Tue, 11 Aug 2015 15:15:23 +0100 [thread overview]
Message-ID: <1439302524-19142-3-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1439302524-19142-1-git-send-email-peter.maydell@linaro.org>
Convert the pxa2xx_mmci device from manual save/load
functions to a VMStateDescription structure.
This is a migration compatibility break.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/sd/pxa2xx_mmci.c | 149 ++++++++++++++++++++--------------------------------
1 file changed, 57 insertions(+), 92 deletions(-)
diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index 5b676c7..ea42434 100644
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -36,27 +36,72 @@ typedef struct PXA2xxMMCIState {
uint32_t cmdat;
uint32_t resp_tout;
uint32_t read_tout;
- int blklen;
- int numblk;
+ int32_t blklen;
+ int32_t numblk;
uint32_t intmask;
uint32_t intreq;
- int cmd;
+ int32_t cmd;
uint32_t arg;
- int active;
- int bytesleft;
+ int32_t active;
+ int32_t bytesleft;
uint8_t tx_fifo[64];
- int tx_start;
- int tx_len;
+ uint32_t tx_start;
+ uint32_t tx_len;
uint8_t rx_fifo[32];
- int rx_start;
- int rx_len;
+ uint32_t rx_start;
+ uint32_t rx_len;
uint16_t resp_fifo[9];
- int resp_len;
+ uint32_t resp_len;
- int cmdreq;
+ int32_t cmdreq;
} PXA2xxMMCIState;
+static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id)
+{
+ PXA2xxMMCIState *s = opaque;
+
+ return s->tx_start < sizeof(s->tx_fifo)
+ && s->rx_start < sizeof(s->rx_fifo)
+ && s->tx_len <= sizeof(s->tx_fifo)
+ && s->rx_len <= sizeof(s->rx_fifo)
+ && s->resp_len <= sizeof(s->resp_fifo);
+}
+
+
+static const VMStateDescription vmstate_pxa2xx_mmci = {
+ .name = "pxa2xx-mmci",
+ .version_id = 2,
+ .minimum_version_id = 2,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(status, PXA2xxMMCIState),
+ VMSTATE_UINT32(clkrt, PXA2xxMMCIState),
+ VMSTATE_UINT32(spi, PXA2xxMMCIState),
+ VMSTATE_UINT32(cmdat, PXA2xxMMCIState),
+ VMSTATE_UINT32(resp_tout, PXA2xxMMCIState),
+ VMSTATE_UINT32(read_tout, PXA2xxMMCIState),
+ VMSTATE_INT32(blklen, PXA2xxMMCIState),
+ VMSTATE_INT32(numblk, PXA2xxMMCIState),
+ VMSTATE_UINT32(intmask, PXA2xxMMCIState),
+ VMSTATE_UINT32(intreq, PXA2xxMMCIState),
+ VMSTATE_INT32(cmd, PXA2xxMMCIState),
+ VMSTATE_UINT32(arg, PXA2xxMMCIState),
+ VMSTATE_INT32(cmdreq, PXA2xxMMCIState),
+ VMSTATE_INT32(active, PXA2xxMMCIState),
+ VMSTATE_INT32(bytesleft, PXA2xxMMCIState),
+ VMSTATE_UINT32(tx_start, PXA2xxMMCIState),
+ VMSTATE_UINT32(tx_len, PXA2xxMMCIState),
+ VMSTATE_UINT32(rx_start, PXA2xxMMCIState),
+ VMSTATE_UINT32(rx_len, PXA2xxMMCIState),
+ VMSTATE_UINT32(resp_len, PXA2xxMMCIState),
+ VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate),
+ VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64),
+ VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32),
+ VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
#define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */
#define MMC_STAT 0x04 /* MMC Status register */
#define MMC_CLKRT 0x08 /* MMC Clock Rate register */
@@ -398,84 +443,6 @@ static const MemoryRegionOps pxa2xx_mmci_ops = {
.endianness = DEVICE_NATIVE_ENDIAN,
};
-static void pxa2xx_mmci_save(QEMUFile *f, void *opaque)
-{
- PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
- int i;
-
- qemu_put_be32s(f, &s->status);
- qemu_put_be32s(f, &s->clkrt);
- qemu_put_be32s(f, &s->spi);
- qemu_put_be32s(f, &s->cmdat);
- qemu_put_be32s(f, &s->resp_tout);
- qemu_put_be32s(f, &s->read_tout);
- qemu_put_be32(f, s->blklen);
- qemu_put_be32(f, s->numblk);
- qemu_put_be32s(f, &s->intmask);
- qemu_put_be32s(f, &s->intreq);
- qemu_put_be32(f, s->cmd);
- qemu_put_be32s(f, &s->arg);
- qemu_put_be32(f, s->cmdreq);
- qemu_put_be32(f, s->active);
- qemu_put_be32(f, s->bytesleft);
-
- qemu_put_byte(f, s->tx_len);
- for (i = 0; i < s->tx_len; i ++)
- qemu_put_byte(f, s->tx_fifo[(s->tx_start + i) & 63]);
-
- qemu_put_byte(f, s->rx_len);
- for (i = 0; i < s->rx_len; i ++)
- qemu_put_byte(f, s->rx_fifo[(s->rx_start + i) & 31]);
-
- qemu_put_byte(f, s->resp_len);
- for (i = s->resp_len; i < 9; i ++)
- qemu_put_be16s(f, &s->resp_fifo[i]);
-}
-
-static int pxa2xx_mmci_load(QEMUFile *f, void *opaque, int version_id)
-{
- PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
- int i;
-
- qemu_get_be32s(f, &s->status);
- qemu_get_be32s(f, &s->clkrt);
- qemu_get_be32s(f, &s->spi);
- qemu_get_be32s(f, &s->cmdat);
- qemu_get_be32s(f, &s->resp_tout);
- qemu_get_be32s(f, &s->read_tout);
- s->blklen = qemu_get_be32(f);
- s->numblk = qemu_get_be32(f);
- qemu_get_be32s(f, &s->intmask);
- qemu_get_be32s(f, &s->intreq);
- s->cmd = qemu_get_be32(f);
- qemu_get_be32s(f, &s->arg);
- s->cmdreq = qemu_get_be32(f);
- s->active = qemu_get_be32(f);
- s->bytesleft = qemu_get_be32(f);
-
- s->tx_len = qemu_get_byte(f);
- s->tx_start = 0;
- if (s->tx_len >= sizeof(s->tx_fifo) || s->tx_len < 0)
- return -EINVAL;
- for (i = 0; i < s->tx_len; i ++)
- s->tx_fifo[i] = qemu_get_byte(f);
-
- s->rx_len = qemu_get_byte(f);
- s->rx_start = 0;
- if (s->rx_len >= sizeof(s->rx_fifo) || s->rx_len < 0)
- return -EINVAL;
- for (i = 0; i < s->rx_len; i ++)
- s->rx_fifo[i] = qemu_get_byte(f);
-
- s->resp_len = qemu_get_byte(f);
- if (s->resp_len > 9 || s->resp_len < 0)
- return -EINVAL;
- for (i = s->resp_len; i < 9; i ++)
- qemu_get_be16s(f, &s->resp_fifo[i]);
-
- return 0;
-}
-
PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
hwaddr base,
BlockBackend *blk, qemu_irq irq,
@@ -512,9 +479,6 @@ static void pxa2xx_mmci_instance_init(Object *obj)
sysbus_init_irq(sbd, &s->irq);
sysbus_init_irq(sbd, &s->rx_dma);
sysbus_init_irq(sbd, &s->tx_dma);
-
- register_savevm(NULL, "pxa2xx_mmci", 0, 0,
- pxa2xx_mmci_save, pxa2xx_mmci_load, s);
}
static void pxa2xx_mmci_realize(DeviceState *dev, Error **errp)
@@ -548,6 +512,7 @@ static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data)
dc->realize = pxa2xx_mmci_realize;
dc->props = pxa2xx_mmci_properties;
+ dc->vmsd = &vmstate_pxa2xx_mmci;
}
static const TypeInfo pxa2xx_mmci_info = {
--
1.9.1
next prev parent reply other threads:[~2015-08-11 14:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-11 14:15 [Qemu-devel] [PATCH 0/3] hw/sd/pxa2xx_mmci: convert to sysbus and vmstate Peter Maydell
2015-08-11 14:15 ` [Qemu-devel] [PATCH 1/3] hw/sd/pxa2xx_mmci: convert to SysBusDevice object Peter Maydell
2015-09-07 16:40 ` Markus Armbruster
2015-09-07 16:42 ` Peter Maydell
2015-09-07 16:57 ` Markus Armbruster
2015-12-03 21:20 ` Peter Maydell
2015-12-04 7:30 ` Markus Armbruster
2015-12-04 11:00 ` Peter Maydell
2015-12-04 12:50 ` Markus Armbruster
2015-12-04 12:55 ` Peter Maydell
2015-12-04 13:04 ` Markus Armbruster
2015-12-04 18:49 ` Kevin O'Connor
2015-12-04 16:42 ` Paolo Bonzini
2015-12-04 18:50 ` Peter Crosthwaite
2015-12-04 19:24 ` Kevin O'Connor
2015-12-07 0:02 ` Peter Crosthwaite
2015-12-07 6:11 ` Kevin O'Connor
2015-12-07 8:50 ` Markus Armbruster
2015-12-07 9:58 ` Paolo Bonzini
2015-12-07 10:31 ` Markus Armbruster
2015-12-07 14:32 ` Peter Maydell
2015-09-07 18:39 ` Peter Crosthwaite
2015-08-11 14:15 ` Peter Maydell [this message]
2015-08-11 14:15 ` [Qemu-devel] [PATCH 3/3] hw/sd/pxa2xx_mmci: Add reset function Peter Maydell
2015-09-07 15:34 ` [Qemu-devel] [PATCH 0/3] hw/sd/pxa2xx_mmci: convert to sysbus and vmstate Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439302524-19142-3-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=armbru@redhat.com \
--cc=patches@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).